The fbo naming inherited from gl-renderer is confusing, and now it
is used in many places.
Rename the two options for output creation to surface and surfaceless
to hopefully make them more meaningful.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
The frame_device variable wasn't used in the commit that added it, and
later another commit that performed a bunch of clean-up bookkeeping added
cairo_device_destroy() for it. This was non-destructive because
cairo_device_destroy() handles NULL gracefully, but still Very Weird.
Remove it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
A Vulkan renderer for weston, based on the GL renderer.
The goal is to impose the least requirements as possible on Vulkan
implementations, as to allow even Vulkan 1.0 (or early development)
drivers to run a Wayland compositor. Any additional features or
extensions are made optional if possible.
Currently supports drm, wayland, x11 and headless backends.
As of this implementation, this is still considered an experimental
renderer.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This just moves gl-borders up to libweston weston_renderer as-is,
with no change in functionality.
This is a preparation step so that other renderers can use the
same interface.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Although backends can create renderbuffers of any size, they always
request the output's current mode size (including decorations).
Letting backends ask for a different size than the output has a few
read-back related design issues like for instance weston_renderer's
read_pixels() API users, currently assuming the output size and
without knowledge of renderbuffers, can retrieve cropped images if a
backend asks for a smaller size. Same issue for the output capture
subsystem.
This commit proposes to fix these issues by simply, albeit perhaps
radically, removing the width and height parameters from
create_renderbuffer(), enforcing the current mode's size of the
associated output.
The VNC and PipeWire backends now also access the output size via the
current mode, not through the width and height variables. This has the
benefit of unifying the backends, as well as the renderers, in their
use of output sizes.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
The Pixman renderer creates renderbuffers with the create_image() and
create_image_from_ptr() functions. The recent addition of the GL
renderer's create_fbo() function, which is pretty similar to the
Pixman ones, brings the opportunity to unify Pixman and GL renderers.
This commit proposes a common renderer function create_renderbuffer()
to create a renderbuffer of the specified format with an optional user
provided destination buffer.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
It's currently assumed by backends that renderers discard
renderbuffers on resize. This commit introduces a new
weston_renderbuffer_discarded_func callback that must be passed at
renderbuffer creation in order to be notified of discarded events from
the renderer. This discarded event could potentially be reused later
by renderers on other occasions without having to change backends once
they get proper support for that.
On output resize, once a discarded event handler fails (returns false)
on a renderbuffer, all the remaining renderbuffers in the output list
go stale and weston_renderer_resize_output() ultimately returns false
for backends to be notified of the failure.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Renderbuffers currently have a libweston-internal base data structure
with a ref-counting system to handle their lifetime. The problem is
that renderers keep a ref to all renderbuffers in a list per output
(to deal with damages) and that it prevents backends from releasing
renderbuffer resources when not needed anymore. Renderbuffers are then
only released (last ref removed) when the output is destroyed or
resized. dma-buf renderbuffers even expose a dedicated function
remove_renderbuffer_dmabuf() to explictly request the release of their
resources.
This commit proposes to get rid of the ref-counting system by exposing
a single entry point to explicitly destroy all types of renderbuffers
from the renderer.
Instead of removing a renderbuffer from its output list and dropping
its ref when the output is resized, this commit also introduces the
concept of stale renderbuffers which consists in releasing the
resources of a renderbuffer when it's discarded by the renderer while
keeping it in the output list, with a stale state, until it's
explicitly destroyed.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Move the responsibility for damaging the entire area of new
renderbuffers from backends to renderers.
There's one little drawback: VNC damage logging can't log the
accumulated renderbuffer damage anymore, but I guess this should
somehow be done as an option in the renderers.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
This is problematic as we don't have namespacing for these and some of
the macros can interfere with other defines.
This reverts commit 8634c7e349.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As weston_windowed_output_get_api needs ARRAY_LENGTH() move helpers to a
libweston/ so other users can re-use that instead of re-defining these
all over. Easier for other front-ends to make use of them.
With this change windowed-output-api.h also includes the helpers header.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We've got output->scale, output->current_scale, output->original_scale and
output->native_scale.
output->scale is apparently just a weird temporary variable, and has led
to some confusing bugs.
Remove it entirely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Use gcc and clang's 'fallthrough' attribute instead of a comment to
fall through switch statements. This allows to request fall through
inside a block and prevents issues with preprocessed files.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
The repaint loop is started when a client provides a new frame while the
compositor is idle. This frame should be shown as soon as possible. So it makes
no sense to commit the previous frame one more time before rendering the next
frame.
Just call weston_output_finish_frame() directly to start repainting immediately.
As a side effect, this fixes an issue when the output is resized when no
fullscreen shell is involved: At that point, parent.draw_initial_frame is
already false, so draw_initial_frame() is not called. But when resizing, the old
buffers are removed so the commit happens without a buffer attached to the
surface. So the surface is invisible for one frame until the next one is
rendered.
draw_initial_frame() is not removed here, because it is still needed for the
synchronous resize that happens with the fullscreen shell.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
We've forgotten to set this up in some backends, so let's just do it in
weston_compositor_init_renderer().
The headless backend used to fail out if linux_dmabuf_setup() failed, but
had no reason to do so, so just remove that to make the code common.
Suggested by cwabbott on irc.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The windowed output API is implemented by the Wayland, the X11 and the
headless backends. It's currently not possible to create a secondary
headless backend when the primary backend is Wayland or X11 because
the windowed output API would be registered twice. This commit
suffixes the windowed output API names with the backend name in order
to avoid clashes: "weston_windowed_output_api_<backend>_v2".
A use case for Wayland or X11 as primary backend and headless as
secondary is for instance to request output captures on the headless
backend to avoid read backs on the primary backend's render buffers.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
Currently we flush damage for the "primary plane" every repaint, but this
is folly.
The drm backend may skip rendering entirely if using an all-planes
composition. This could leave the renderer plane in a messy state if a
surface on an overlay plane disappears.
Instead, let the backends flush the primary plane damage when they know
they need to render.
Fixes#864
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Insert the backend into the weston_compositor::backend_list instead
of setting weston_compositor::backend. The compositor uses this to
determine whether the backend is capable of being loaded simultaneously
with other backends.
The Wayland backend can only be loaded as primary backend.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This should avoid spurious signal events received by the shell in order
to resize its buffer.
As we can have resize events being sent even if xdg-shell activation
doesn't happen, make use of the output dimensions to determine if we
need do send out a resize event or not.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Let backends declare the presentation clocks they can use with a
new bitfield weston_backend::supported_presentation_clocks and set
presentation clock after loading the backend in the compositor.
Make weston_compositor_set_presentation_clock() internal and replace
weston_compositor_set_presentation_clock_software() with an exported
weston_compositor_backends_loaded(), which is called by the compositor
after the backend is loaded.
In the future, this can be extended to determine the subset of clocks
supported by all backends.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Right now every backend clears output damage from the primary plane when
it repaints. Instead of having this same operation spread across all
the backends, just do it in the core instead.
In the future, we want to remove damage tracking from the primary plane
entirely, and this is a small step in that direction.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Turn the Pixman/GL if/else conditionals into switch cases to make it
easier to add support for other renderers in the future.
Also makes sure that weston --backend=wayland --renderer=noop fails
with an error message instead of segfaulting.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
If we want to support multiple backends, the compositor must take care
to call this once, at the appropriate moment, so stop letting the
backends handle compositor shutdown themselves.
Move the weston_compositor_shutdown() calls from the backend::destroy
callbacks into weston_compositor_destroy() and the calls in the backend
creation error paths into weston_compositor_load_backend().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a weston_backend::shutdown callback to split out the part of
weston_backend::destroy that needs to be done before compositor
shutdown.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Destroy the renderer before disconnecting the Wayland display.
Trying to destroy the GL renderer with the Wayland display already gone
crashes in the Mesa Wayland integration.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Track damage on struct weston_renderbuffer and drop the custom damage
region from struct wayland_shm_buffer.
Pass repaint damage to wl_surface_damage() instead of accumulated
renderbuffer damage.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Since the pixman_region32_t damage is initialized unconditionally, also
finalize it unconditionally. Otherwise we leak rectangle memory when
sb->output->frame is NULL.
Reported-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Don't forget to transfer the fullscreen setting from the config to the backend.
Without this, weston tries to resize the window with the windowed output API but
that is not registered with new_config.fullscreen == true.
This code was accidentally lost in 0a5bb7acff
("backend-wayland: Use renderer enum type for config selection"). So just
restore it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Pass the backend instead of the compositor to the windowed output API
create_head() method and increment the API version.
That way the backend will not have to find the backend pointer from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
This was not found in the test suite, but if you run wayland-backend
manually with ASan, you see the same leaks as in
backend-headless: fully release pango and fontconfig
Fix them the same way.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
wayland_output_destroy_shm_buffers() is called immediately before
output_destroy() of the renderer is called. And for the pixman renderer all
renderbuffers must be destroyed before the output can be destroyed.
Also, weston_renderbuffer_unref() is not called when the buffer is released
because buffer->output is now NULL, so the renderbuffer would be leaked.
So just unref the renderbuffer immediately. Set it to NULL to avoid unreffing it
again should wayland_output_destroy_shm_buffers() be called again before the
buffer is released. This can happen during an xdg-shell resize.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The pixel format stored in backends->format[0] is effectively looked up
via pixel_format_get_info(DRM_FORMAT_ARGB8888). Reuse that instead of
looking up the same via pixel_format_get_info_by_pixman(PIXMAN_a8r8g8b8)
in multiple places.
There are still two instances of hard-coded CAIRO_FORMAT_ARGB32 in
wayland_output_get_shm_buffer() that currently can not be obtained from
pixel_format_info.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Push weston_coord into the notification functions instead of passing
two doubles.
The touch handlers are passed a pointer to a weston_coord, which is
unusual. This is done so we can pass a NULL pointer instead of a
fabricated invalid coordinate when the touch type is TOUCH_UP.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This creates a global coordinate from a device coordinate.
Replace it with weston_coord_global_from_output_point() which
does the same thing and returns a weston_coord_global.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reorder pixman renderer output state and SHM renderbuffer removal to
make sure the pixman renderbuffer list is empty when the output state
is destroyed.
Fixes: 4d96635a3f ("pixman-renderer: track damage in weston_renderbuffer")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Pixman output state creation requires a valid pixel format to be set for
weston_output_update_capture_info().
Fixes: c67773bc5c ("pixman-renderer: use pixel_format_info instead of pixman_format_code_t")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Use struct pixel_format_info pointers instead of uint32_t drm fourcc
values at the API surface for output and image creation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use struct pixel_format_info pointers instead of pixman_format_code_t
values at the API surface for output and image creation.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add weston_renderbuffer_ref/unref() functions and use them to
eventually destroy the weston_renderbuffer. Drop the explicit
renderbuffer_destroy vfunc from the pixman renderer interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
This pixman image is not actually used anymore, drop it.
Fixes: 89e1831cd7 ("pixman-renderer: add weston_renderbuffer and create/destroy interface")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Stop calling pixman_renderer_init() from backends directly.
Call it via weston_compositor_init_renderer() instead.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a struct weston_renderbuffer parameter to repaint_output and make
backends set the pixman image renderbuffer through this parameter
instead of using pixman_renderer_output_set_buffer()
Turn pixman_renderer_output_set_buffer() static.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a create_image_from_ptr vfunc to struct pixman_renderer_interface,
which wraps weston_renderbuffer creation for the pixman renderer via
pixman_image_create_bits(), as well as a renderbuffer_destroy vfunc
to dispose of the pixman image renderbuffer.
Also add create_image_no_clear using pixman_image_create_bits_no_clear()
instead.
Make the backends create and destroy their pixman image renderbuffers
through this interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
