weston/doc/sphinx/toc/libweston/meson.build

# you need to add here any files you add to the toc directory as well
files = [
	'compositor.rst',
	'head.rst',
	'log.rst',
	'output.rst',
	'output-management.rst',
        'weston-config.rst',
        'shell-utils.rst',
]

foreach file : files
	configure_file(input: file, output: file, copy: true)
endforeach

subdir('images')
build: Add sphinx/breathe support for generating documentation This is adds basic configuration files for doxygen and for breathe, which is a doxygen-to-sphinx bridge that can document C symbols. Breathe is configured with default project 'weston' and implicitly adds :members: and :undoc-members: to breathe configuration options. This allows a shorter way to call breathe directives without the need specify the project and also to display implicitly all the members, documented or not. A 'docs' run_target to force the docs to be re-built has been added. Initially (the first time the build system is ran) the documentation will automatically be built, but later re-builds will require the use of the 'docs' target. This avoid further delays in building weston but in the same time allows the possiblity to update/improve the documentation bits to those who want that. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> 2019-06-14 12:41:02 +03:00			`# you need to add here any files you add to the toc directory as well`
doc: output management sequence diagrams When we were designing the libweston output API, I wrote a design document as a Phabricator wiki page. Phabricator is no longer accessible so that information needs to be migrated to a new place. Here I am converting most of it into libweston Sphinx documentation, particularly pulling in the sequence diagrams I drew. This should help people understand how libweston output configuration works. The diagrams are committed as both MSC source files and rendered PNG files. I did not bother tinkering with the build to run mscgen automatically and then with the CI images to install the tool. The Sphinx configuration need numref explicitly enabled so that figures are automatically numbered and can be referenced by their number rather than their whole caption text(!). The document structure is changed a little better flowing with Output Management being the overview page and the Heads and Outputs being the API pages. First I wrote the struct weston_output and weston_head descriptions in Doxygen comments in libweston.h, but then in the API page that text would have been buried somewhere towards the end of the page. So I put that text in ReST instead where it comes as first on the pages as it should. The doc for the structs only contain a link to the top of the page. Yes, the comment style in libweston.h is a little broken. If I left the asterisk there it would show up as a bullet point in Sphinx. OTOH putting everything from \rst in a single line did not produce anything. Because Sphinx cannot look in two places, the images need to be copied into the build dir too. mscgen: http://www.mcternan.me.uk/mscgen/ Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/25 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com> 2020-01-16 17:44:51 +02:00			`files = [`
			`'compositor.rst',`
			`'head.rst',`
			`'log.rst',`
			`'output.rst',`
			`'output-management.rst',`
doc/sphinx: Include weston-config and shell-utils in docs libweston contains weston_config and weston_shell_utils utilities functions so include these in the sphinx documentation as well. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> 2022-11-22 15:27:47 +02:00			`'weston-config.rst',`
			`'shell-utils.rst',`
doc: output management sequence diagrams When we were designing the libweston output API, I wrote a design document as a Phabricator wiki page. Phabricator is no longer accessible so that information needs to be migrated to a new place. Here I am converting most of it into libweston Sphinx documentation, particularly pulling in the sequence diagrams I drew. This should help people understand how libweston output configuration works. The diagrams are committed as both MSC source files and rendered PNG files. I did not bother tinkering with the build to run mscgen automatically and then with the CI images to install the tool. The Sphinx configuration need numref explicitly enabled so that figures are automatically numbered and can be referenced by their number rather than their whole caption text(!). The document structure is changed a little better flowing with Output Management being the overview page and the Heads and Outputs being the API pages. First I wrote the struct weston_output and weston_head descriptions in Doxygen comments in libweston.h, but then in the API page that text would have been buried somewhere towards the end of the page. So I put that text in ReST instead where it comes as first on the pages as it should. The doc for the structs only contain a link to the top of the page. Yes, the comment style in libweston.h is a little broken. If I left the asterisk there it would show up as a bullet point in Sphinx. OTOH putting everything from \rst in a single line did not produce anything. Because Sphinx cannot look in two places, the images need to be copied into the build dir too. mscgen: http://www.mcternan.me.uk/mscgen/ Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/25 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com> 2020-01-16 17:44:51 +02:00			`]`
build: Add sphinx/breathe support for generating documentation This is adds basic configuration files for doxygen and for breathe, which is a doxygen-to-sphinx bridge that can document C symbols. Breathe is configured with default project 'weston' and implicitly adds :members: and :undoc-members: to breathe configuration options. This allows a shorter way to call breathe directives without the need specify the project and also to display implicitly all the members, documented or not. A 'docs' run_target to force the docs to be re-built has been added. Initially (the first time the build system is ran) the documentation will automatically be built, but later re-builds will require the use of the 'docs' target. This avoid further delays in building weston but in the same time allows the possiblity to update/improve the documentation bits to those who want that. Signed-off-by: Marius Vlad <marius.vlad@collabora.com> 2019-06-14 12:41:02 +03:00
			`foreach file : files`
			`configure_file(input: file, output: file, copy: true)`
			`endforeach`
doc: output management sequence diagrams When we were designing the libweston output API, I wrote a design document as a Phabricator wiki page. Phabricator is no longer accessible so that information needs to be migrated to a new place. Here I am converting most of it into libweston Sphinx documentation, particularly pulling in the sequence diagrams I drew. This should help people understand how libweston output configuration works. The diagrams are committed as both MSC source files and rendered PNG files. I did not bother tinkering with the build to run mscgen automatically and then with the CI images to install the tool. The Sphinx configuration need numref explicitly enabled so that figures are automatically numbered and can be referenced by their number rather than their whole caption text(!). The document structure is changed a little better flowing with Output Management being the overview page and the Heads and Outputs being the API pages. First I wrote the struct weston_output and weston_head descriptions in Doxygen comments in libweston.h, but then in the API page that text would have been buried somewhere towards the end of the page. So I put that text in ReST instead where it comes as first on the pages as it should. The doc for the structs only contain a link to the top of the page. Yes, the comment style in libweston.h is a little broken. If I left the asterisk there it would show up as a bullet point in Sphinx. OTOH putting everything from \rst in a single line did not produce anything. Because Sphinx cannot look in two places, the images need to be copied into the build dir too. mscgen: http://www.mcternan.me.uk/mscgen/ Fixes: https://gitlab.freedesktop.org/wayland/weston/issues/25 Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com> 2020-01-16 17:44:51 +02:00
			`subdir('images')`