power-profiles-daemon

Makes power profiles handling available over D-Bus.

Installation

$ meson _build -Dprefix=/usr
$ ninja -v -C _build install

It requires libgudev, systemd and polkit-gobject.

Introduction

power-profiles-daemon offers to modify system behaviour based upon user-selected power profiles. There are 3 different power profiles, a "balanced" default mode, a "power-saver" mode, as well as a "performance" mode. The first 2 of those are available on every system. The "performance" mode is only available on select systems and is implemented by different "drivers" based on the system or systems it targets.

In addition to those 2 or 3 modes (depending on the system), "actions" can be hooked up to change the behaviour of a particular device. For example, this can be used to disable the fast-charging for some USB devices when in power-saver mode.

GNOME's Settings and shell both include interfaces to select the current mode, but they are also expected to adjust the behaviour of the desktop depending on the mode, such as turning the screen off after inaction more aggressively when in power-saver mode.

Debugging

You can now check which mode is in use, and which ones are available by running:

powerprofilesctl

You can change the selected profile by running (change power-saver for the chosen profile):

powerprofilesctl set power-saver

You can check the current configuration which will be restored on reboot in /var/lib/power-profiles-daemon/state.ini.

Those commands are also available through the D-Bus interface:

gdbus introspect --system --dest net.hadess.PowerProfiles --object-path /net/hadess/PowerProfiles
gdbus call --system --dest net.hadess.PowerProfiles --object-path /net/hadess/PowerProfiles --method org.freedesktop.DBus.Properties.Set 'net.hadess.PowerProfiles' 'ActiveProfile' "<'power-saver'>"

If that doesn't work, please file an issue, attach the output of:

sudo G_MESSAGES_DEBUG=all /usr/libexec/power-profiles-daemon -r -v

Testing

If you don't have hardware that can support the performance mode, or the degraded mode you can manually run the power-profiles-daemon binary as root with the environment variable POWER_PROFILE_DAEMON_FAKE_DRIVER set to 1. For example:

sudo POWER_PROFILE_DAEMON_FAKE_DRIVER=1 /usr/libexec/power-profiles-daemon -r -v

References

• Use Low Power Mode to save battery life on your iPhone (iOS)
• lowPowerModeEnabled (iOS)
• React to Low Power Mode on iPhones (iOS)
• [S]ettings that use less battery (Android)
• EnergySaverStatus Enum (Windows)

Why power-profiles-daemon

The power-profiles-daemon project was created to help provide a solution for two separate use cases, for desktops, laptops, and other devices running a “traditional Linux desktop”.

The first one is a "Low Power" mode, that users could toggle themselves, or have the system toggle for them, with the intent to save battery. Mobile devices running iOS and Android have had a similar feature available to end-users and application developers alike.

The second use case was to allow a "Performance" mode on systems where the hardware maker would provide and design such a mode. The idea is that the Linux kernel would provide a way to access this mode which usually only exists as a configuration option in some machines' "UEFI Setup" screen.

This second use case is the reason why we didn't implement the "Low Power" mode in UPower, as was originally discussed.

As the daemon would change kernel settings, we would need to run it as root, and make its API available over D-Bus, as has been customary for more than 10 years. We would also design that API to be as easily usable to build graphical interfaces as possible.

Why not...

This section will contain explanations of why this new daemon was written rather than re-using, or modifying an existing one. Each project obviously has its own goals and needs, and those comparisons are not meant as a slight on the project.

As the code bases for both those projects listed and power-profiles-daemon are ever evolving, the comments were understood to be correct when made.

thermald

thermald only works on Intel CPUs, and is very focused on allowing maximum performance based on a "maximum temperature" for the system. As such, it could be seen as complementary to power-profiles-daemon.

tuned and TLP

Both projects have similar goals, allowing for tweaks to be applied, for a variety of workloads that goes far beyond the workloads and use cases that power-profiles-daemon targets.

A fair number of the tweaks that could apply to devices running GNOME or another free desktop are either potentially destructive (eg. some of the SATA power-saving mode resulting in corrupted data), or working well enough to be put into place by default (eg. audio codec power-saving), even if we need to disable the power saving on some hardware that reacts badly to it.

Both are good projects to use for the purpose of experimenting with particular settings to see if they'd be something that can be implemented by default, or to put some fine-grained, static, policies in place on server-type workloads which are not as fluid and changing as desktop workloads can be.

auto-cpufreq

It doesn't take user-intent into account, doesn't have a D-Bus interface and seems to want to work automatically by monitoring the CPU usage, which kind of goes against a user's wishes as a user might still want to conserve as much energy as possible under high-CPU usage.

slimbookbattery

This is not free software (Source code available but not modifiable without express authorization.). The application does a lot of things in addition to the "3 profiles" selection:

• replaces part of the suspend mechanism with its own hybrid sleep implementation (systemd already implements one)
• implements charging limits for batteries
• implements some power saving tricks, which could also be implemented

A lot of those power-saving tricks could be analysed and used, but we obviously can't rely on "source available" software for our free desktops.

system76-power

Very similar project to power-profiles-daemon but goes much more into the weeds in terms of power-saving/performance implementation.

It has a D-Bus API for choosing different power profiles, and applies a number of settings based on the profile selected. Most of the interesting settings are already upstreamed (SATA power tweaks), should be upstreamed to the vanilla kernel if possible (PCI power-savings), or are things we already implement (Intel P-State).

It could without a doubt have been used as a base for power-profiles-daemon if it was more of an upstream project instead of a PopOS!/System76 project.

asusctl

It provides an interface to a number of ASUS-specific features which isn't directly relevant to power-profiles-daemon like handling keyboard LED settings, or setting battery charge limits. The functionality that was relevant got moved to the asus-wmi kernel driver during the 5.14 kernel development cycle, where power-profiles-daemon can consume it. The 2 daemons are now complementary.