We don't zalloc the physical device so we need to unconditionally set
everything. Crucible helpfully initializes all allocations to 139 so it
was getting true regardless of whether or not the kernel actually
supports context priorities.
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Gen4 point clipping calls brw_clip_tri_alloc_regs with nr_verts == 0,
which means that c->reg.vertex[] isn't initialized. It then emits MOVs
to stomp components of those uninitialized registers to 0.
This started causing assertions after Matt's recent series, when those
uninitialized registers started getting BRW_REGISTER_TYPE_NF, which
definitely doesn't exist on Gen4-5.
Reviewed-by: Matt Turner <mattst88@gmail.com>
With the Align16 tests now disabled, we can run the rest of the tests in
ICL mode (and see them pass!)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Align16 is no more. We previously generated an align16 ADD instruction
to calculate DDY:
add(16) g25<1>F -g23<4>.xyxyF g23<4>.zwzwF { align16 1H };
Without align16, we now implement it as:
add(4) g25<1>F -g23<0,2,1>F g23.2<0,2,1>F { align1 1N };
add(4) g25.4<1>F -g23.4<0,2,1>F g23.6<0,2,1>F { align1 1N };
add(4) g26<1>F -g24<0,2,1>F g24.2<0,2,1>F { align1 1N };
add(4) g26.4<1>F -g24.4<0,2,1>F g24.6<0,2,1>F { align1 1N };
where only the first two instructions are needed in SIMD8 mode.
Note: an earlier version of the patch implemented this in two
instructions in SIMD16:
add(8) g25<2>F -g23<4,2,0>F g23.2<4,2,0>F { align1 1N };
add(8) g25.1<2>F -g23.1<4,2,0>F g23.3<4,2,0>F { align1 1N };
but I realized that the channel enable bits will not be correct. If we
knew we were under uniform control flow, we could emit only those two
instructions however.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In a future patch, generate_ddy will want to inspect inst->exec_size.
Change generate_ddx as well for consistency.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The PLN instruction is no more. Its functionality is now implemented
using two MAD instructions with the new native-float type. Instead of
pln(16) r20.0<1>:F r10.4<0;1,0>:F r4.0<8;8,1>:F
we now have
mad(8) acc0<1>:NF r10.7<0;1,0>:F r4.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r20.0<1>:F acc0<8;8,1>:NF r5.0<8;8,1>:F r10.5<0;1,0>:F
mad(8) acc0<1>:NF r10.7<0;1,0>:F r6.0<8;8,1>:F r10.4<0;1,0>:F
mad(8) r21.0<1>:F acc0<8;8,1>:NF r7.0<8;8,1>:F r10.5<0;1,0>:F
... and in the case of SIMD8 only the first pair of MAD instructions is
used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If multiple instructions are emitted, special handling of things like
conditional mod and NoDDClr/NoDDChk need to be performed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This isn't technically broken, but the next patch will make this
function report whether it generated multiple instructions, and that
information will be used to disable the application of conditional mod
by the generic code.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This new type exposes the additional precision offered by the
accumulator register and will be used in the next patch to implement the
functionality of the PLN instruction using a pair of MAD instructions.
One weird thing to note: align1 ternary instructions may only have an
accumulator in the dst or src1 normally, but when src0's type is :NF
the accumulator is read.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware register types' encodings have changed on Gen11. Good thing
we have that superfluous looking brw_reg_type abstraction lying around!
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Gen11 does not support DF, Q, UQ types in hardware. As a result, we have
to disable some GL extensions until they can be reimplemented.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
anv_gem_set_context_param is to be used directly instead!
Fixes: 6d8ab53303 "anv: implement VK_EXT_global_priority extension"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: add ANV_CONTEXT_REALTIME_PRIORITY (Chris)
use unreachable with unknown priority (Samuel)
v3: add stubs in gem_stubs.c (Emil)
use priority defines from gen_defines.h
v4: cleanup, add anv_gem_set_context_param (Jason)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (v2)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v3)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
v2:
- Add the proper values to gen9+ (Jason)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
test_fuzz_compact_instruction() was attempting to modify the uint64_t
data array of a brw_inst through a pointer to uint32_t, which has
undefined behavior. This was causing the test_eu_compact unit test to
fail mysteriously for me on GCC 7 with some additional
harmless-looking changes I had applied to my tree, which happened to
affect the order instructions are emitted by GCC causing the bit
twiddling to be done after the clear_pad_bits() call which is supposed
to overwrite the same data through a pointer of different type,
leading to data corruption. A similar failure has been reported by
Vinson Lee on the master branch built with GCC 8.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105052
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Similar to 90dd6e5 ("Android: egl: add dependency on libnativewindow")
Fixes the following building errors:
In file included from external/mesa/src/intel/vulkan/gen7_cmd_buffer.c:30:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
...
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
^~~~~~~~~~~~~~~~~
1 error generated.
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Building rules are aligned to automake ones
The correct script to build anv_extensions.{c,h} is anv_extensions_gen.py
Generation rules for anv_extensions.c requires --out-c option
Generation rules for anv_extensions.h were missing
Necessary include paths are added to avoid following build errors:
cp: cannot stat '.../gen/STATIC_LIBRARIES/libmesa_vulkan_common_intermediates/vulkan/anv_extensions.c':
No such file or directory
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
In file included from external/mesa/src/intel/vulkan/anv_batch_chain.c:30:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
^~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: dd088d4bec ("anv/extensions: Generate a header file with extension tables")
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We were only resolving the first.
v2:
- Do not require that the number of layers on dst and src are an
exact match, it is okay if the dst has more layers so long as
it has at least the same that we are going to resolve.
- Do not always resolve array_len layers, we should resolve
only from base_array_layer to array_len.
v3:
- v2 was assuming that array_len represented the total number of
layers in the image, but it represents the number of layers
starting at the base array ayer.
v4:
- The number of layers to resolve should be taken from the
framebuffer (Nanley).
Fixes new CTS tests for multisampled layered rendering:
dEQP-VK.renderpass.multisample_resolve.layers_*
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
For a bit there, we had a bug in i965 where it ignored the tiling of the
modifier and used the one from the BO instead. At one point, we though
this was best fixed by setting a tiling from Vulkan. However, we've
decided that i965 was just doing the wrong thing and have fixed it as of
5048572352.
The old assumptions also affected the solution we used for legacy
scanout in Vulkan. Instead of treating it specially, we just treated it
like a modifier like we do in GL. This commit goes back to making it
it's own thing so that it's clear in the driver when we're using
modifiers and when we're using legacy paths.
v2 (Jason Ekstrand):
- Rename legacy_scanout to needs_set_tiling
Reviewed-by: Daniel Stone <daniels@collabora.com>
It's true for depth HiZ clears because we only have HiZ on single-slice
images right now. However, for stencil-only clears there is no such
restriction.
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This looks like it should be protected by the assume() about
nr_color_regions, but my compiler warns anyway.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Instead of having aux usage and ANV_AUX_USAGE_DEFAULT to mean "give me
something reasonable" we now use anv_layout_to_aux_usage whenever a
layout is available. If a layout is available, we ignore the aux_usage
parameter. For the cases where we have an explicit aux usage such as
clears and aux ops, we have a new ANV_IMAGE_LAYOUT_EXPLICIT_AUX layout.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
If we don't have HiZ, then anv_layout_to_aux_usage will return NONE for
both layouts. If the two layouts are the same, they will get the aux
usage. In either case, the code below will give us ISL_AUX_OP_NONE and
we'll return without doing anything.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This is quite a bit cleaner because we now sync the clear values at the
same time as we do the fast clear. For loading the clear values into
the surface state, we now do it once when we handle the LOAD_OP_LOAD
instead of every subpass.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This requires us to ditch the VkAttachmentReference struct in favor of
an anv-specific struct. However, we can now easily identify from just
the subpass attachment what kind of an attachment it is. This will make
iteration over anv_subpass::attachments a little easier in some case.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
