Some hardware doesn't have a way to check if invocation was demoted,
in such case we have to track it ourselves.
OpIsHelperInvocationEXT is specified as:
"An invocation is currently a helper invocation if it was originally
invoked as a helper invocation or if it has been demoted to a helper
invocation by OpDemoteToHelperInvocationEXT."
Therefore we:
- Set gl_IsHelperInvocationEXT = gl_HelperInvocation
- Add "gl_IsHelperInvocationEXT = true" right before each demote
- Add "gl_IsHelperInvocationEXT = gl_IsHelperInvocationEXT || condition"
right before each demote_if
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9460>
Added:
* a pass that renumbers bases of IO intrinsics
* a pass that converts mediump IO to 16 bits, optionally using the new
packed varying slots
* a pass that sets (forces) mediump in IO intrinsics (for testing)
* a pass that remaps VARYING_SLOT_VAR[0..15]_16BIT to VARYING_SLOT_VAR[0..31]
(if some shader stages don't want packed varyings)
* a pass that folds type conversions around texture opcodes into those
opcodes (e.g. tex(f2f32(coord), ..) is changed into tex accepting f16)
* a pass that changes (legalizes) sampler src and dst types based on specified
hw constraints (e.g. derivatives must be the same type as coordinates)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9050>
This pass creates a SSBO var for the printf buffer. It does an atomic increment
at the beginning of the buffer to determine where to write, then dumps
the args after that.
v2: [airlied]
Enhanced to use an index into a set of format info that is passed
back to the caller. The format info contains the number of args,
argument sizes and the format string.
v3: move format string lowering to vtn
v4: Jason reworked it.
v5: assume buffer has initial offset prebaked in and work from there.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8254>
This optimizes atomics with a uniform offset so that only one atomic
operation is done in the subgroup.
For shaders which do a very large amount of atomics, this can
significantly improve performance.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6558>
LLVM loves take advantage of the fact that vec3s in OpenCL are 16B
aligned and so it can just read/write them as vec4s. This results in a
LOT of vec4->vec3 casts on loads and stores. One solution to this
problem is to get rid of all vec3 variables.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6871>
This pass attempts to optimize three broad categories of memcpy:
1. Self-copies: These we can discard out-of-hand.
2. Vector copies: It doesn't matter what the vector size is or if the
source and destination have different vector types, it's still easy
enough to emit a load/store pair.
3. Tightly packed copies: In the case where a type is tightly packed
(no padding bits), we can replace the memcpy with a copy_deref
instruction which the optimizer is far better at handling.
This has proven capable of getting rid of many of the memcpy instances
in some rather gnarly OpenCL C kernels I've been looking at, even after
coming out of LLVM's optimizer.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6871>
This adds primarily two passes: One is a lowering pass which turns
these conversion intrinsics into a series of ALU ops. The other is an
optimization pass which attempt to simplify the conversion whenever
possible in the hopes that we can turn it into a "normal" conversion op
which doesn't need special treatment.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
Most of these were originally written by Daniel Stone in the Microsoft
ClOn12 branch, reworked by Jesse Natalie, fixed by Boris Brezillon, and
possibly touched by others along the way. Unfortunately, none of that
is in the commit history thanks to living in the CLOn12 branch.
I ported them to mesa master and further reworked things for better
cosmetics. In particular,
1. They now live in a builder helper rather than in vtn_alu.c.
2. Instead of looping inside each builder helper, we just trust NIR
vector instructions to handle vectors.
3. Lots of re-arranging of the helpers for clarity, better asserting,
and better re-use with the upcoming lowering pass.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
Taken mostly directly from the anv pass. A few anv-specific things that
I could leave in anv aren't included. Specifically on turnip we don't
need to set gl_Layer to 0, and we can handle the case where the FS reads
gl_ViewIndex, so that check is moved into anv.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6514>
In CL 1.2, images are required to be either read-only or write-only. We
can always translate the read-only image ops to texture ops. In CL 2.0
(and an extension), the ability is added to have read-write images but
sampling (with a sampler) is only allowed on read-only images. As long
as we only lower read-only images to texture ops, everything should stay
consistent.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6578>
This is very common for backends -- r600, freedreno, and nir_to_tgsi all
needed versions of it. Make a common intrinsic to use for it with a
shared, slightly-tuned-from-ir3 lowering pass.
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6378>
v2 (Karol):
renamed pathes to paths
use more bool
use _mesa_set_intersects
deduplicated some code
fixed some typos
v3 (Karol):
don't enable structurizer as we do this in vtn now
v4 (Jason):
A few clean-ups due to unstructured NIR changes
v5 (Jason):
Misc whitespace and style cleanups
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Tested-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2401>
The old pass only handled intrinsic load_constant, while the new
nir_opt_shrink_vectors handles ALU ops, nir load_consts, along with all
the load intrinsics.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>
Ideally we'd also handle unused middles of vectors and reswizzle ALU-only
uses of it so we could write fewer channels, but that's future work/
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6050>
Lower them to ACCESS_COHERENT to simplify the backend and
probably give better performance than invalidating or writing back the
entire L0/L1 cache.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4905>
nir_schedule already has a struct for options which makes it more than
just a function declaration. Later patches intend to add more structs to
complement these options. In order to make the code easier to manage,
this moves the nir_scheduler-related parts out of nir.h to their own
header.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5953>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Version 4.4 of the GLSL spec changed the definition of noise*() to
always return zero and earlier versions of the spec allowed zero as a
valid implementation.
All drivers, as far as I can tell, unconditionally call lower_noise()
today which turns ir_unop_noise into zero. We've got a 10-year-old
comment in there saying "In the future, ir_unop_noise may be replaced by
a call to a function that implements noise." Well, it's the future now
and we've not yet gotten around to that. In the mean time, the GLSL
spec has made doing so illegal.
To make things worse, we then pretend to handle the opcode in
glsl_to_nir, ir_to_mesa, and st_glsl_to_tgsi even though it should never
get there given the lowering. The lowering in st_glsl_to_tgsi defines
noise*() to be 0.5 which is an illegal implementation of the noise
functions according to pre-4.4 specs. We also have opcodes for this in
NIR which are never used because, again, we always call lower_noise().
Let's just kill the whole opcode and make builtin_builder.cpp build a
bunch of functions that just return zero.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4624>
Copied from anv, replaced state with passing model/range directly.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4528>
Previously, the ir_call functions for builtin functions were replaced
with the inline implementation immediately after being added to the
instruction list. This patch replaces that with a separate pass that
lowers them after the conversion from AST to IR is complete. This will
be useful to be able to insert some handling for the precision lowering
pass before the inlining. This needs to happen because the precision
of the operations in the inlined implementation depends on the highest
precision of all of the arguments to the call.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
The pass lowers 1-bit booleans produced by NIR to the native bitsize
of the operations that produce them.
v2: change on lower_load_const_instr after upstream changes. Added
TODO2 to explain it, as it was not properly tested yet (see
already existing TODO) (Neil)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
This works by finding the first rvalue that it can lower using an
ir_rvalue_visitor. In that case it adds a conversion to float16
after each rvalue and a conversion back to float before storing
the assignment.
Also it uses a set to keep track of rvalues that have been
lowred already. The handle_rvalue method of the rvalue visitor doesn’t
provide any way to stop iteration. If we handle a value in
find_precision_visitor we want to be able to stop it from descending into
the lowered rvalue again.
Additionally this pass disallows converting nodes containing non-float.
The can_lower_rvalue function explicitly excludes any branches
that have non-float types except bools. This avoids the need to have
special handling for functions that convert to int or double.
Co-authored-by: Hyunjun Ko <zzoon@igalia.com>
v2. Adds lowering for texture samples
v3. Instead of checking whether each node can be lowered while walking the
tree, a separate tree walk is now done to check all of the nodes in a
single pass. The lowerable nodes are added to a set which is checked
during find_precision_visitor instead of calling can_lower_rvalue.
v4. Move the special case for temporaries to find_lowerable_rvalues. This
needs to be handled while checking for lowerable rvalues so that any
later dereferences of the variable will see the right precision.
v5. Add an override to visit ir_call instructions and apply the same
technique to override the precision of the temporary variable in the
same way as done for builtin temporaries and ir_assignment calls.
v6. Changes the pass so that it doesn’t need to lower an entire subtree in
order do perform a lowering. Instead, certain instructions can be
marked as being indepedent of their child instructions. For example,
this is the case with array dereferences. The precision of the array
index doesn’t have any bearing on whether things using the result of
the array deref can be lowered.
Now, only toplevel lowerable nodes are added to the lowerable_rvalues
instead instead of additionally adding all of the subnodes.
It now also only needs one hash table instead of two.
v7. Don’t try to lower sampler types. Instead, the sample instruction is
now treated as an independent point where the result of the sample can
be used in a lowered section. The precision of the sampler type
determines the precision of the sample instruction. This also means
the coordinates to the sampler can be lowered.
v8. Use f2fmp instead of f2f16.
v9. Disable lowering derivatives calcualtions, which might not work
properly on some hw backends.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3885>
SPIR-V generates very granular barriers, however HW and backends might
not necessarily take advantage of those. This pass provides a general
mechanism to combine such barriers.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3224>
This pass is intended to work around game bugs, only!
It also lowers nir_intrinsic_load_helper_invocation to
nir_intrinsic_is_helper_invocation for consistency.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4047>
When varying packing is disabled for transform feedback and a xfb
declaration points to an array element or structure member, the
element/member should be aligned to the start of a slot as well.
If that's not the case, a new varying is created and the
element/member value is copied.
There might a way to further optimize the number of slots allocated
or the number of copies necessary if the performance cost is
problematic. For example, in cases where simply padding the top
level variable might correctly align all the captured values.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2433>
The bulk of it can be reused to implement iris's internal non-bindless
image lowering, which I would like to reuse in freedreno, v3d, and
nir-to-tgsi.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3728>
To facilitate lowering SSBOs to globals, we need a load_ssbo_address
intrinsic. This intrinsic takes an SSBO index and loads the address in
global memory of the SSBO (likely implemented via a uniform in the
driver). In the future, we'll support bounds checking, but at the moment
this is not supported (this pass should only be used for trusted
contexts at the moment, i.e. contexts without robustness extensions).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2753>
Etnaviv also does the same thing, so let's try to avoid repetition here,
and use the same for it code as well.
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Paul Cercueil <paul@crapouillou.net>
This is similar to a scheduler I've written for vc4 and i965, but this
time written at the NIR level so that hopefully it's reusable. A notable
new feature it has is Goodman/Hsu's heuristic of "once we've started
processing the uses of a value, prioritize processing the rest of their
uses", which should help avoid the heuristic otherwise making such
systematically bad choices around getting texture results consumed.
Results for v3d:
total instructions in shared programs: 6497588 -> 6518242 (0.32%)
total threads in shared programs: 154000 -> 152828 (-0.76%)
total uniforms in shared programs: 2119629 -> 2068681 (-2.40%)
total spills in shared programs: 4984 -> 472 (-90.53%)
total fills in shared programs: 6418 -> 1546 (-75.91%)
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> (v1)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com> (v2)
v2: Use the DAG datastructure, fold in the scheduling-for-parallelism
patch, include SSA defs in live values so we can switch to bottom-up
if we want.
v3: Squash in improvements from Alejandro Piñeiro for getting V3D to
successfully register allocate on GLES3.1 dEQP. Make sure that
discards don't move after store_output. Comment spelling fix.
nir_lower_point_size.c was not build into the libmesa_nir library for non-meson
builds. However it was included in the meson build.
This patch fixes that.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Lower amul to either imul or imul24, depending on whether 24b is enough
bits to calculate an offset within the thing being dereferenced.
Signed-off-by: Rob Clark <robdclark@chromium.org>
