Patch uses mem_ctx for allocation to ensure param array gets freed
later.
==6164== 48 bytes in 1 blocks are definitely lost in loss record 61 of 193
==6164== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==6164== by 0x12E31C6C: ralloc_size (ralloc.c:121)
==6164== by 0x130189F1: fs_visitor::assign_constant_locations() (brw_fs.cpp:2095)
==6164== by 0x13022D32: fs_visitor::optimize() (brw_fs.cpp:5715)
==6164== by 0x13024D5A: fs_visitor::run_fs(bool, bool) (brw_fs.cpp:6229)
==6164== by 0x1302549A: brw_compile_fs (brw_fs.cpp:6570)
==6164== by 0x130C4B07: blorp_compile_fs (blorp.c:194)
==6164== by 0x130D384B: blorp_params_get_clear_kernel (blorp_clear.c:79)
==6164== by 0x130D3C56: blorp_fast_clear (blorp_clear.c:332)
==6164== by 0x12EFA439: do_single_blorp_clear (brw_blorp.c:1261)
==6164== by 0x12EFC4AF: brw_blorp_clear_color (brw_blorp.c:1326)
==6164== by 0x12EFF72B: brw_clear (brw_clear.c:297)
Fixes: 8d90e28839 ("intel/compiler: Allocate pull_param in assign_constant_locations")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes intermittent GPU hangs on Broxton with an Intel internal
test case.
There are plenty of similar fragment shaders in piglit that do
not use any varyings and any uniforms. According to the
documentation special timing is needed between pipeline stages.
Apparently we just don't hit that with piglit. Even with the
failing test case one doesn't always get the hang.
Moreover, according to the error states the hang happens
significantly later than the execution of the problematic shader.
There are multiple render cycles (primitive submissions) in between.
I've also seen error states where the ACTHD points outside the
batch. Almost as if the hardware writes somewhere that gets used
later on. That would also explain why piglit doesn't suffer from
this - most tests kick off one render cycle and any corruption
is left unseen.
v2 (Ken): Instead of enabling push constants, enable one of the
inputs (PSIZ).
v3 (Ken, Jason): Use LAYER instead making vulkan emit_3dstate_sbe()
happy.
Cc: "17.3 17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Asserting slot >= 2 made sense when the URB read offset was always 1
(pair of slots). Commit 566a0c43f0 made
it possible to read from the VUE header in slot 0, by adjusting the
offset to be 0. So, this assert is now bogus. Use the one from GL.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Commit 566a0c43f0 started setting the
3DSTATE_SBE bit to override these values with the one calculated there.
So, they're dead. Stop setting them.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The disassembler does not (and should not) be modifying the data.
Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We currently have a bug where nir_lower_system_values gets called before
nir_lower_var_copies so it will miss any system value uses which come
from a copy_var intrinsic. Moving it to after brw_preprocess_nir fixes
this problem.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
The PRM says "The execution size must be 1." In 73137997e2, the
execution size was set to 1 when it should have been BRW_EXECUTE_1
(which maps to 0). Later, in dc2d3a7f5c, JMPI was used for
line AA on gen6 and earlier and we started manually stomping the
exeution size to BRW_EXECUTE_1 in the generator. This commit fixes the
original bug and makes brw_JMPI just do the right thing.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 73137997e2
Returns the brw_type for a given ssa.bit_size, and a reference type.
So if bit_size is 64, and the reference type is BRW_REGISTER_TYPE_F,
it returns BRW_REGISTER_TYPE_DF. The same applies if bit_size is 32
and reference type is BRW_REGISTER_TYPE_HF it returns BRW_REGISTER_TYPE_F
v2 (Jason Ekstrand):
- Use better unreachable() messages
- Add Q types
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to implement the ballot intrinsic, we do a MOV from flag
register to some GRF. If that GRF is used in a SEL, cmod propagation
helpfully changes it into a MOV from the flag register with a cmod.
This is perfectly valid but when lower_simd_width comes along, it simply
splits into two instructions which both have conditional modifiers.
This is a problem since we're reading the flag register. This commit
makes us check whether or not flags_written() overlaps with the flag
values that we are reading via the instruction source and, if we have
any interference, will force us to emit a copy of the source.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Also needed in freedreno/ir3.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
gcc is throwing this warning in my meson build:
../src/intel/compiler/brw_eu_validate.c:50:11: warning
argument 1 null where non-null expected [-Wnonnull]
return memmem(haystack.str, haystack.len,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
needle.str, needle.len) != NULL;
~~~~~~~~~~~~~~~~~~~~~~~
The first check for CONTAINS has a NULL error_msg.str and 0 len. The
glibc implementation will exit without looking at any haystack bytes if
haystack.len < needle.len, so this was safe, but silence the warning
anyway by guarding against implementation variablility.
Fixes: 122ef3799d ("i965: Only insert error message if not already present")
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2: Warn that support is still in alpha (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Align1 mode offers some nice features over align16, like access to more
data types and the ability to use a 16-bit immediate. This patch does
not start using any new features. It just emits ternary instructions in
align1 mode.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Put hw_ in the name so that it's clear these are the hardware encodings.
Similar to commit 9fb8323328 ("i965: Rename brw_inst's functions that
access the register type")
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The instruction word contains SubRegNum[4:2] so it's in units of dwords
(hence the * 4 to get it in terms of bytes). Before this patch, the
subreg would have been wrong for DF arguments.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
I'm going to call this from brw_inst.h, and I don't want to have to
include all of brw_reg.h.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
It is already done in NIR.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It is already done in NIR.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The restriction is supposed to apply if the width *field* is >= 8192,
meaning the actual width *value* is >= 8193.
The code also incorrectly used == for some reason.
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Commit a73116ecc6 tried to make add_barrier_deps()
walk to the next barrier, and stop. To accomplish that, it added an
is_barrier flag. Unfortunately, this only works half of the time.
The issue is that add_barrier_deps() walks both backward (to the
previous barrier), and forward (to the next barrier). It also sets
is_barrier. Assuming that we're processing instructions in forward
order, this means that is_barrier will be set for previous instructions,
but not future ones. So we'll never see it, and walk further than we
need to.
dEQP-GLES31.functional.ssbo.layout.random.all_shared_buffer.23
now compiles its shaders in 3.6 seconds instead of 3.3 minutes.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Pallavi G <pallavi.g@intel.com>
This eliminates a layer of wrapping, and makes a backend_instruction
sufficient. The downside is that it exposes 'eot' to the vec4 backend,
which it doesn't need, but can basically happily ignore.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Pallavi G <pallavi.g@intel.com>
Fix build error.
CC vulkan/vulkan_libvulkan_common_la-anv_device.lo
In file included from vulkan/anv_device.c:33:0:
vulkan/anv_device.c: In function ‘anv_AllocateMemory’:
vulkan/anv_device.c:1562:37: error: ‘struct anv_device’ has no member named ‘instace’; did you mean ‘instance’?
result = vk_errorf(device->instace, device,
^
vulkan/anv_private.h:317:17: note: in definition of macro ‘vk_errorf’
__vk_errorf(instance, obj, REPORT_OBJECT_TYPE(obj), error,\
^~~~~~~~
Fixes: 9775894f10 ("anv: Move size check from anv_bo_cache_import() to caller (v2)")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Linking libvulkan_intel.so can fail, due to unresolved references to
libexpat.so.
EXPAT_CFLAGS should be moved as well.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now that anvil fully implements the Vulkan HAL interface, we can install
it as the vendor HAL module at /vendor/lib/hw/vulkan.${board}.so. To do
so:
- Rename LOCAL_MODULE to vulkan.$(TARGET_BOARD_PLATFORM).
- Use LOCAL_PROPRIETARY_MODULE to install under vendor path.
Tested by running different Sascha Williams demos on Android-IA.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
[chadv: Extract this hunk from Tapani's patch, and embed it as
stand-alone patch in my arc-vulkan series].
Signed-off-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This change prepares for VK_ANDROID_native_buffer. When the user imports
a gralloc hande into a VkImage using VK_ANDROID_native_buffer, the user
provides no size. The driver must infer the size from the internals of
the gralloc buffer.
The patch is essentially a refactor patch, but it does change behavior
in some edge cases, described below. In what follows, the "nominal size"
of the bo refers to anv_bo::size, which may not match the bo's "actual
size" according to the kernel.
Post-patch, the nominal size of the bo returned from
anv_bo_cache_import() is always the size of imported dma-buf according
to lseek(). Pre-patch, the bo's nominal size was difficult to predict.
If the imported dma-buf's gem handle was not resident in the cache, then
the bo's nominal size was align(VkMemoryAllocateInfo::allocationSize,
4096). If it *was* resident, then the bo's nominal size was whatever
the cache returned. As a consequence, the first cache insert decided the
bo's nominal size, which could be significantly smaller compared to the
dma-buf's actual size, as the nominal size was determined by
VkMemoryAllocationInfo::allocationSize and not lseek().
I believe this patch cleans up that messy behavior. For an imported or
exported VkDeviceMemory, anv_bo::size should now be the true size of the
bo, if I correctly understand the problem (which I possibly don't).
v2:
- Preserve behavior of aligning size to 4096 before checking. [for
jekstrand]
- Check size with < instead of <=, to match behavior of commit c0a4f56
"anv: bo_cache: allow importing a BO larger than needed". [for
chadv]
This will allow us to implement VK_ANDROID_native_buffer without dup'ing
the fd. We must close the fd in VK_KHR_external_memory_fd, but we should
not in VK_ANDROID_native_buffer.
v2:
- Add missing close(fd) for case
VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR, subcase
ANV_SEMAPHORE_TYPE_BO.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If this flag is set, then the image and the bo have the same lifetime.
vkDestroyImage will release the bo.
We need this for VK_ANDROID_native_buffer, because that extension
creates the VkImage *and* imports its memory during the same
call, vkCreateImage.
v2: Rebase onto VK_KHR_bind_memory2.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
