Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
v1 -> v2: add defines for the various bits
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Since the GREMEDY extensions are normally only exposed by the gremedy
debugger (and could possibly trigger debug paths in the app), we don't
expose the extension by default, but instead only with
ST_DEBUG=gremedy.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This patch adds a new interface to support hardware mipmap generation.
PIPE_CAP_GENERATE_MIPMAP is added to allow a driver to specify
if this new interface is supported; if not supported, the state tracker will
fallback to mipmap generation by rendering/texturing.
v2: add PIPE_CAP_GENERATE_MIPMAP to the disabled section for all drivers
v3: add format to the generate_mipmap interface to allow mipmap generation
using a format other than the resource format
v4: fix return type of trace_context_generate_mipmap()
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It makes sense to re-use pipe->invalidate_resource for the purpose of
glInvalidateBufferData, but this function is already implemented in vc4
where it doesn't have the expected behavior. So add a capability flag
to indicate that the driver supports the expected behavior.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Each load/store on most hardware can specify what caching to do. Since
SSBO allows individual variables to also have separate caching modes,
allow loads/stores to have the qualifiers instead of attempting to
encode them in declarations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This makes it possible to support indirect multidraws as well as having
the number of such draws to come from a separate GPU resource.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This will allow the state tracker to inform the driver where in a
broken-up multidraw we currently are. This can then be passed into the
vertex shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This allows the state tracker to know that the various draw parameters
are available in vertex shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Zero length arrays are non standard:
warning C4200: nonstandard extension used : zero-sized array in struct/union
Cannot generate copy-ctor or copy-assignment operator when UDT contains a zero-sized array
And all code does `N * sizeof query_result->batch[0]`, so it should work
exactly the same.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Unused as of commit 23fb11455b "{st,targets}/dri: use static/dynamic
pipe-loader"
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
As of earlier all the targets use the non inline version. Don't forget
to remove the function prototypes/declarations.
v2: rebase on top of virgl support.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Move the winsys into the pipe-target, similar to the hardware
pipe-driver.
v2:
- move int declaration outside of loop (Brian)
- fold the teardown into a goto + separate function.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Rob Clark <robclark@freedesktop.org>
Some drivers (in particular radeon[si], but also freedreno judging from
a quick grep) may want to expose performance counters that cannot be
individually enabled or disabled.
Allow such drivers to mark driver-specific queries as requiring a new
type of batch query object that is used to start and stop a list of queries
simultaneously.
v3: adjust recently added nv50 queries
v2: documentation for create_batch_query
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This was only used to implement an unnecessarily restrictive interpretation
of the spec of AMD_performance_monitor. The spec says
A performance monitor consists of a number of hardware and software
counters that can be sampled by the GPU and reported back to the
application.
I guess one could take this as a requirement that counters _must_ be sampled
by the GPU, but then why are they called _software_ counters? Besides,
there's not much reason _not_ to expose all counters that are available,
and this simplifies the code.
v3: add a missing change in the nouveau driver (thanks Samuel Pitoiset)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This will allow gallium drivers to send messages to KHR_debug endpoints
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
So I've known this was broken before, cogl has a workaround
for it from what I know, but with the gallium based swrast
drivers BlitFramebuffer from back to front or vice-versa
was pretty broken.
The legacy swrast driver tracks when a front buffer is used
and does the get/put images when it is mapped/unmapped,
so this patch attempts to add the same functionality to the
gallium drivers.
It creates a new context interface to denote when a front
buffer is being created, and passes a private pointer to it,
this pointer is then used to decide on map/unmap if the
contents should be updated from the real frontbuffer using
get/put image.
This is primarily to make gtk's gl code work, the only
thing I've tested so far is the glarea test from
https://github.com/ebassi/glarea-example.git
v2: bump extension version,
check extension version before calling get image. (Ian)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91930
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Added PIPE_VIDEO_CHROMA_FORMAT_NONE in p_format.h
and return it by default in ChromaToPipe.
Renamed YCbCrToPipe to VaFourccToPipeFormat because it now
contains RGB.
Implemented PipeFormatToVaFourcc which will be used later in
VlVaDeriveImage.
Note that gstreamer-vaapi check all the VAImageFormat fields.
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This avoids a serious r600g bug leading to a GPU hang.
The chances this bug will get fixed are pretty low now.
I deeply regret listening to others and not pushing this patch, leaving
other users with a GPU-crashing driver. Yes, it should be fixed
in the compiler and it's ugly, but users couldn't care less about that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86720
Cc: 11.0 10.6 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The TGSI usage mask can't be used, because these are declared as an output
array of 2 elements.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Required by ARB_sample_shading for drivers that don't want a shader variant
in st/mesa.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Since debugging issues w/ fd's close()d at the wrong time can be quite
fun, this should probably be made more explicit in the docs.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The VMware svga driver doesn't directly support pipe_screen::get_timestamp()
but we can do a work-around. However, we need a gallium context to do so.
This patch adds a new pipe_context::get_timestamp() function that will only
be called if the pipe_screen::get_timestamp() function is NULL.
Signed-off-by: Brian Paul <brianp@vmware.com>
This allows creating compute-only and debug contexts.
Reviewed-by: Brian Paul <brianp@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74329
v2: add a CAP for half floats
drivers should not expose the CAPs if they don't support the formats
v3: update relnotes
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
