There's no need to call wl_display_roundtrip() after trying to create a
buffer through wl_drm; if it succeeds then everything is fine, and if it
fails, then we get a fatal protocol error so can't recover anyway.
Additionally, doing a roundtrip on the default / main application queue,
is destructive anyway, so would need to be its own queue.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit afe8c8a299)
Untangle the exit cleanup paths so we don't try to use the registry
variable before it's been initialised.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit d9a8bba7f4)
The instruction encodings only allow for immediates. Don't try to
replace a zero (which is dumb to have in that op in any case) with RZ.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 82e77d4e44)
It's been like this since the code was introduced.
Fixes: 86eb4131a9 (st/va: add headless support, i.e. VA_DISPLAY_DRM)
Cc: <mesa-stable@lists.freedesktop.org>
Cc: Julien Isorce <julien.isorce@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit aaea53c2c0)
The procedure for decompressing an opaque DXT1 OpenGL format is
dependant on the comparison of two colors stored in the first 32 bits of
the compressed block. Here's the specified OpenGL behavior for
reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1.
This means that the behavior is incompatible with OpenGL. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque DXT1 OpenGL formats are specified to be
decoded in exactly the same way except the BLACK value must have a
transparent alpha channel in the latter. Use the four-channel BC1 Intel
formats with the alpha set to 1 to provide the behavior required by the
spec. Note that the alpha is already set to 1 for RGB formats in
brw_get_texture_swizzle().
v2: Provide a more detailed commit message (Kenneth Graunke).
v3: Ensure the alpha channel is set to 1 for DXT1 formats.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 688ddb85c8)
[Emil Velikov: attribute for BRW to ISL format rename]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_surface_formats.c
The procedure for decompressing an opaque BC1 Vulkan format is dependant on the
comparison of two colors stored in the first 32 bits of the compressed block.
Here's the specified OpenGL (and Vulkan) behavior for reference:
The RGB color for a texel at location (x,y) in the block is given by:
RGB0, if color0 > color1 and code(x,y) == 0
RGB1, if color0 > color1 and code(x,y) == 1
(2*RGB0+RGB1)/3, if color0 > color1 and code(x,y) == 2
(RGB0+2*RGB1)/3, if color0 > color1 and code(x,y) == 3
RGB0, if color0 <= color1 and code(x,y) == 0
RGB1, if color0 <= color1 and code(x,y) == 1
(RGB0+RGB1)/2, if color0 <= color1 and code(x,y) == 2
BLACK, if color0 <= color1 and code(x,y) == 3
The sampling operation performed on an opaque DXT1 Intel format essentially
hard-codes the comparison result of the two colors as color0 > color1. This
means that the behavior is incompatible with OpenGL and Vulkan. This is stated
in the SKL PRM, Vol 5: Memory Views:
Opaque Textures (DXT1_RGB)
Texture format DXT1_RGB is identical to DXT1, with the exception that the
One-bit Alpha encoding is removed. Color 0 and Color 1 are not compared, and
the resulting texel color is derived strictly from the Opaque Color Encoding.
The alpha channel defaults to 1.0.
Programming Note
Context: Opaque Textures (DXT1_RGB)
The behavior of this format is not compliant with the OGL spec.
The opaque and non-opaque BC1 Vulkan formats are specified to be decoded in
exactly the same way except the BLACK value must have a transparent alpha
channel in the latter. Use the four-channel BC1 Intel formats with the alpha
set to 1 to provide the behavior required by the spec.
v2 (Kenneth Graunke):
- Provide a more detailed commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100925
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
(cherry picked from commit 56458cb168)
The datalayout for modules was purposely not being set in order to work around
the fact that the ExecutionEngine requires that the module's datalayout
matches the datalayout of the TargetMachine that the ExecutionEngine is
using.
When the pass manager runs on a module with no datalayout, it uses
the default datalayout which is little-endian. This causes problems
on big-endian targets, because some optimizations that are legal on
little-endian or illegal on big-endian.
To resolve this, we set the datalayout prior to running the pass
manager, and then clear it before creating the ExectionEngine.
This patch fixes a lot of piglit tests on big-endian ppc64.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 14e525a4d7)
Fixes regressions in Android CtsVerifier.apk on Intel Chrome OS devices
due to incorrect error handling in eglMakeCurrent. See below on how to
confirm the regression is fixed.
This partially reverts
commit 23c86c74cc
Author: Chad Versace <chadversary@chromium.org>
Subject: egl: Emit error when EGLSurface is lost
The problem with commit 23c86c74 is that, once an EGLSurface became
lost, the app could never unbind the bad surface. Each attempt to unbind
the bad surface with eglMakeCurrent failed with EGL_BAD_CURRENT_SURFACE.
Specificaly, the bad commit added the error handling below. #2 and #3
were right, but #1 was wrong.
1. eglMakeCurrent emits EGL_BAD_CURRENT_SURFACE if the calling
thread has unflushed commands and either previous surface is no
longer valid.
2. eglMakeCurrent emits EGL_BAD_NATIVE_WINDOW if either new surface
is no longer valid.
3. eglSwapBuffers emits EGL_BAD_NATIVE_WINDOW if the swapped surface
is no longer valid.
Whe I wrote the bad commit, I misunderstood the EGL spec language
for #1. The correct behavior is, if I understand correctly now, is
below. This patch doesn't implement the correct behavior, though, it
just reverts the broken behavior.
- Assume a bound EGLSurface is no longer valid.
- Assume the bound EGLContext has unflushed commands.
- The app calls eglMakeCurrent. The spec requires eglMakeCurrent to
implicitly flush. After flushing, eglMakeCurrent emits
EGL_BAD_CURRENT_SURFACE and does *not* alter the thread's
current bindings.
- If the app calls eglMakeCurrent again, and the app inserts no
commands into the GL command stream between the two eglMakeCurrent
calls, then this second eglMakeCurrent succeeds without emitting an
error.
How to confirm this fixes the regression:
Download android-cts-verifier-7.1_r5-linux_x86-x86.zip from
source.android.com, unpack, and `adb install CtsVerifier.apk`.
Run test "Projection Cube". Click the Pass button (a
green checkmark). Then run test "Projection Widget". Confirm that
widgets are visible and that logcat does not complain about
eglMakeCurrent failure.
Then confirm there are no regressions in the cts-traded module that
commit 263243b1 fixed:
cts-tf > run cts --skip-preconditions --skip-device-info \
-m CtsCameraTestCases \
-t android.hardware.camera2.cts.RobustnessTest
Tested with Chrome OS board "reef".
Fixes: 23c86c74 (egl: Emit error when EGLSurface is lost)
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 8f62d21bd7)
Reorder the uniforms to load first the dvec4-aligned variables in the
push constant buffer and then push the vec4-aligned ones. It takes
into account that the relocated uniforms should be aligned to their
channel size.
This fixes a bug were the dvec3/4 might be loaded one part on a GRF and
the rest in next GRF, so the region parameters to read that could break
the HW rules.
v2:
- Fix broken logic.
- Add a comment to explain what should be needed to optimise the usage
of the push constant buffer slots, as this patch does not pack the
uniforms.
v3:
- Implemented the push constant buffer usage optimization.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit e69e5c7006)
It was setting XYWZ swizzle and writemask to all uniforms, no matter if they
were a vector or scalar, so this can lead to problems when loading them
to the push constant buffer.
Moreover, 'shift' calculation was designed to calculate the offset in
DWORDS, but it doesn't take into account DFs, so the calculated swizzle
for the later ones was wrong.
The indirect case is not changed because MOV INDIRECT will write
to all components. Added an assert to verify that these uniforms
are aligned.
v2:
- Fix 'shift' calculation (Curro)
- Set both swizzle and writemask.
- Add assert(shift == 0) for the indirect case.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 8aa6ada838)
We are going to add a packing feature to reduce the usage of the push
constant buffer. One of the consequences is that 'nr_params' would be
modified by vec4_visitor's run call, so we need to restore it if one of
them failed before executing the fallback ones. Same thing happens to the
uniforms values that would be reordered afterwards.
Fixes GL45-CTS.arrays_of_arrays_gl.InteractionFunctionCalls2 when
the dvec4 alignment and packing patch is applied.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Acked-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 354f7f2cb9)
If X11 did a software fallback to the entire screen, we would throw out
the BO the screen is scanning out from and allocate a new one.
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit e8ea42d245)
Together with some fixes to xdriinfo this fixes xdriinfo not working
with glvnd.
Since apps (xdriinfo) expect GetDriverConfig to work without going to
need through the dance to setup a glxcontext (which is a reasonable
expectation IMHO), the dispatch for this ends up significantly different
then any other dispatch function.
This patch gets the job done, but I'm not really happy with how this
patch turned out, suggestions for a better fix are welcome.
Cc: Kyle Brenneman <kbrenneman@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 84f764a759)
The reasoning Chad gave in the comment for choosing a valign of 4 is
entirely bunk. The fact that you have to multiply pitch by 2 is
completely unrelated to the halign/valign parameters used for texture
layout. (Not completely unrelated. W-tiling is just Y-tiling with a
bit of extra swizzling which turns 8x8 W-tiled chunks into 16x4 y-tiled
chunks so it makes everything easier if miplevels are always aligned to
8x8.) The fact that RENDER_SURFACE_STATE::SurfaceVerticalAlignmet
doesn't have a VALIGN_8 option doesn't matter since this is gen7 and you
can't do stencil texturing anyway.
v2 (Jason Ekstrand):
- Delete most of Chad's comment and add a more descriptive commit
message.
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
(cherry picked from commit 236f17a9f7)
PIPE_BUFFER is a target enum, not a binding. This caused the driver to
up-align the height of buffer resources, leading to largely oversizing
those resources. This is especially bad, as the buffer resources used
by the upload manager are already 1MB in size. Height alignment meant
that those would result in 4 to 8MB big BOs.
Fixes: c9e8b49b88 ("etnaviv: gallium driver for Vivante GPUs")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 8173d7d9e8)
vc4 was rejecting renderonly's import, because the offset field was
nonzero.
Fixes: 848b49b288 ("gallium: add renderonly library")
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit c98f03c6eb)
This just adds the chip in the right places.
We don't set the partial_vs_wave workaround, as radeonsi
doesn't, but have to confirm it's not required.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit a096d8d3f7)
[Andres Gomez: dropped code that didn't make it for 17.0]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/amd/vulkan/radv_device.c
Possibly other gen's have a similar limit. Fixes glmark2 -b shadow
with larger resolutions on devices with small gmem (for example,
fullscreen 1080p on 8x16/db410c).
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 6050d5bf3d)
LLVMDemangle, LLVMGlobalISel, and LLVMDebugInfoMSF are new.
Also update the comment to add irreader to the list of components.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Chuck Atkins <chuck.atkins@kitware.com>
Signed-off-by: Ben Boeckel <ben.boeckel@kitware.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
(cherry picked from commit 58f51f0754)
The matrix used for YCbCr to RGB is listed in:
https://en.wikipedia.org/wiki/YCbCr
There was an error in converting the offsets from integers to unorm
values: 0.0625=16/256 should be 16.0/255,and 0.5=128.0/256 should be
128.0/255. With this fix, the CSC result is bit aligned with wikipedia's
conversion result and FFMPeg's result.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100854
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit a6fb943f3e)
This ensures that future calls to eglSwapBuffers and eglMakeCurrent emit
an error.
This patch is part of a series for fixing
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface
on Chrome OS x86 devices.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit e5eace5868)
Squashed with commit:
egl/android: Set EGLSurface.Lost to EGL_TRUE/EGL_FALSE
Lost is an EGLBoolean, so we should assign it to EGL_TRUE/EGL_FALSE,
not true/false.
Fixes: e5eace5868 ("egl/android: Mark surface as lost when dequeueBuffer fails")
Fixes: 0212db3504 ("egl/android: Cancel any outstanding ANativeBuffer in surface destructor")
Reviewed-by: Chad Versace <chadversary@chromium.org>
(cherry picked from commit 63b12b0c77)
That is, call ANativeWindow::cancelBuffer in droid_destroy_surface().
This should prevent application deadlock when the app destroys the
EGLSurface after EGL has acquired a buffer from SurfaceFlinger
(ANativeWindow::dequeueBuffer) but before EGL has released it
(ANativeWindow::enqueueBuffer).
This patch is part of a series for fixing
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface
on Chrome OS x86 devices.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0212db3504)
Add a new bool, _EGLSurface::Lost, and check it in eglMakeCurrent and
eglSwapBuffers. The EGL 1.5 spec says that those functions emit errors
when the native surface is no longer valid.
This patch just updates core EGL. No driver sets _EGLSurface::Lost yet.
I discovered that Mesa failed to detect lost surfaces while debugging an
Android CTS camera test,
android.hardware.camera2.cts.RobustnessTest#testAbandonRepeatingRequestSurface.
This patch doesn't fix the test though, though, because the test expects
EGL_BAD_SURFACE when the surface becomes lost, and this patch actually
complies with the EGL spec. If I interpreted the EGL spec correctly,
EGL_BAD_NATIVE_WINDOW or EGL_BAD_CURRENT_SURFACE is the correct error.
Cc: mesa-stable@lists.freedesktop.org
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 23c86c74cc)
The code itself has nothing to do with shared glapi, thus having it
behind GLX_SHARED_GLAPI is misleading. Use GLX_INDIRECT_RENDERING
instead.
The latter macro is set at global scope by the Autotools and Scons build
systems.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 6177d60a37)
Analogous to previous commit. Check with the extensive commit
description and bug report referenced.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 51accecce7)
In the early days of Xorg and Mesa we had multiple providers of the
GLAPI. All of those were the ones responsible for dlopening the DRI
module. Hence it was perfectly fine, and actually expected, for the DRI
modules to have unresolved symbols.
Since then we've moved the API to a separate shared library and no other
libraries provide the symbols.
Here comes the picky part:
It's possible that one uses old Xorg (where libglx.so provides the
GLAPI) and new Mesa (with DRI modules linking against libglapi.so).
That should still work, since the the libglx.so symbols will take
precedence over the libglapi.so ones.
I've verified this while running 1.14 series Xorg alongside this (and
next) patch.
It may seem a bit fragile, but that's of reasonably OK since all of the
affected Xorg versions have been EOL for years.
The final one being the 1.14 series, which saw its final bug fix release
1.14.7 in June 2014.
To ensure that the binaries do not have unresolved symbols add
-no-undefined and $(LD_NO_UNDEFINED), just like we do everywhere else
throughout mesa.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98428
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 79a26b663a)
If the gbm_create_device() call here actually did fail, any subsequent
eglTerminate on the display would segfault.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
(cherry picked from commit f258815c7d)
According to the spec we get VK_ERROR_OUT_OF_HOST_MEMORY or
VK_ERROR_OUT_OF_DEVICE_MEMORY on vkBindImageMemory failure.
Fixes returned value changed by b546c9d.
Fixes: b546c9d ("anv: anv_gem_mmap() returns MAP_FAILED as mapping error")
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 939b015736)
Take it into account when checking if the mapping failed.
v2:
- Remove map == NULL and its related comment (Emil)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 6f3e3c715a ("vk/allocator: Add a BO pool")
Fixes: 9919a2d34d ("anv/image: Memset hiz surfaces to 0 when binding memory")
Cc: "17.0 17.1" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b546c9d318)
Squashed with commit:
anv: fix anv_gem_mmap comment to not mention NULL
The function cannot return NULL, update the comment accordingly.
Fixes: b546c9d ("anv: anv_gem_mmap() returns MAP_FAILED as mapping error")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
(cherry picked from commit 9d2aa6e506)
No piglit regressions.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
(cherry picked from commit a8007ed687)
This ports
0fcb92c17d
anv: wsi: report presentation error per image request
This fixes:
dEQP-VK.wsi.xlib.incremental_present.scale_none.*
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 09034aab64)
[Andres Gomez: resolve trivial conflicts]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/amd/vulkan/radv_wsi.c
The command is really operating on a Queue not a command buffer and the
nearest object to that with an allocator is VkDevice.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Cc: "17.0 17.1" <mesa-dev@lists.freedesktop.org>
(cherry picked from commit bd3a9813b9)
[Andres Gomez: resolve trivial conflicts]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/intel/vulkan/anv_batch_chain.c
The regioning parameters are now properly set by convert_to_hw_regs()
and we don't need to fix them in the generator. That latter fix
previously done in the generator was strictly speaking wrong for any
non-identity regions.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit f57e234fdd)
[Andres Gomez: resolve trivial conflicts]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_vec4_generator.cpp
On gen7, the swizzles used in DF align16 instructions works for element
size of 32 bits, so we can address only 2 consecutive DFs. As we assumed that
in the rest of the code and prepare the instructions for this (scalarize_df()),
we need to set it to two again.
However, for DF align1 instructions, a width of 2 is wrong as we are not
reading the data we want. For example, an uniform would have a region of
<0, 2, 1> so it would repeat the first 2 DFs, when we wanted to access
to the first 4.
This patch sets the default one to 4 and then modifies the width of
align16 instruction's DF sources when we translate the logical swizzle
to the physical one.
v2:
- Remove conditional (Curro).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit aaeb1c99be)
From IVB PRM, vol4, part3, "General Restrictions on Regioning
Parameters":
"If ExecSize = Width and HorzStride ≠ 0, VertStride must
be set to Width * HorzStride."
In next patch, we are going to modify the region parameter for
uniforms and vgrf. For uniforms that are the source of
DF align1 instructions, they will have <0, 4, 1> regioning and
the execsize for those instructions will be 4, so they will break
the regioning rule. This will be the same for VGRF sources where
we use the vstride == 0 exploit.
As we know we are not going to cross the GRF boundary with that
execsize and parameters (not even with the exploit), we just fix
the vstride here.
v2:
- Move is_align1_df() (Curro)
- Refactor exec_size == width calculation (Curro)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit 7f728bce81)
[Andres Gomez: use original is_align1_df]
Signed-off-by: Andres Gomez <agomez@igalia.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_vec4.cpp
To restart interrupted system calls, use drmIoctl.
Fixes: 848b49b288 ("gallium: add renderonly library")
CC: <mesa-stable@lists.freedesktop.org>
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit b539335e50)
The renderonly_scanout holds a reference on its prime pipe resource,
which should be released when it is destroyed. If it was created by
renderonly_create_kms_dumb_buffer_for_resource, the dumb BO also has
to be destroyed.
Fixes: 848b49b288 ("gallium: add renderonly library")
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit cd8ee259c8)
prime_fd is only used to transfer the scanout buffer to the GPU inside
renderonly_create_kms_dumb_buffer_for_resource. It should be closed
immediately to avoid leaking the DMA-BUF file handle.
Fixes: 848b49b288 ("gallium: add renderonly library")
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit ab51cd2f26)
NIR now validates that SSA references use the same number of channels as
are in the SSA value.
v2: Reword commit message, since the commit didn't land before the
validation change did.
Fixes: 370d68babc ("nir/validate: Validate that bit sizes and components always match")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit fba6559a1e)
val_bool and val_int are in a union. val_bool gets the first byte, which
happens to work on LE when setting via the int, but breaks on BE. By
setting the value properly, we are able to use DRI3 on BE architectures.
Tested by running glxgears with a NV34 in a G5 PPC.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
[Emil Velikov: squash the vmwgfx hunk]
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit 6af14778a3)
