In particular, the LOD bias and depth comparison values are packed before the
'normal' texture coordinates, and the array slice and LOD values are appended.
NOTE: This is a candidate for the 9.1 branch.
In particular, rework the sRGB/linear format selection code.
There's no reason to mess with the Mesa format.
Just do everything in terms of the gallium pipe_format.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
The code before was getting a pipe format, then calling
st_pipe_format_to_mesa_format() and then converting back again with
st_mesa_format_to_pipe_format(). This removes one conversion step.
If we call gl[Copy]TexImage2D() with a generic compression format
(e.g. intFormat=GL_COMPRESSED_RGBA) we can't choose a DXT format if
we don't have the external DXT compression library.
We weren't actually enforcing this before since the
pipe_screen::is_format_supported(DXT) query has no dependency on
the DXT compression library.
Now if we're given a generic compressed format and we can't do DXT
compression we'll fall back to a non-compressed format.
v2: use util_format_is_s3tc() function and add more comments about
the allow_dxt parameter.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When glCompressedTexImage is called the internalFormat is a specific
format for the incoming image and the the hardware format should be
the same (since we never do format transcoding). So use the simpler
_mesa_glenum_to_compressed_format() function. This change is also
needed for the next patch.
Note: This is a candidate for the stable branches.
Ivybridge doesn't appear to have the same errata as Sandybridge; no
corruption was observed by setting it to more than the minimal correct
value. It's possible that we were simply lucky, since the URB entries
are 1024-bit on Ivybridge vs. 512-bit Sandybridge. Or perhaps the
underlying hardware issue is fixed.
Either way, we may as well program the minimum value since it's now
readily available, likely to be more efficient, and possibly more
correct.
v2: Use GEN7_SBE_* defines rather than GEN6_SF_*. (A copy and paste
mistake.) They're the same, but using the right names is better.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
(This commit message was primarily written by Paul Berry, who explained
what's going on far better than I would have.)
Previous to this patch, we thought that the only restrictions on
3DSTATE_SF's URB read length were (a) it needs to be large enough to
read all the VUE data that the SF needs, and (b) it can't be so large
that it tries to read VUE data that doesn't exist. Since the VUE map
already tells us how much VUE data exists, we didn't bother worrying
about restriction (a); we just did the easy thing and programmed the
read length to satisfy restriction (b).
However, we didn't notice this erratum in the hardware docs: "[errata]
Corruption/Hang possible if length programmed larger than recommended".
Judging by the context surrounding this erratum, it's pretty clear that
it means "URB read length must be exactly the size necessary to read all
the VUE data that the SF needs, and no larger". Which means that we
can't program the read length based on restriction (b)--we have to
program it based on restriction (a).
The URB read size needs to precisely match the amount of data that the
SF consumes; it doesn't work to simply base it on the size of the VUE.
Thankfully, the PRM contains the precise formula the hardware expects.
Fixes random UI corruption in Steam's "Big Picture Mode", random terrain
corruption in PlaneShift, and Piglit's fbo-5-varyings test.
NOTE: This is a candidate for all stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56920
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60172
Tested-by: Jordan Justen <jordan.l.justen@intel.com> (v1/Piglit)
Tested-by: Martin Steigerwald <martin@lichtvoll.de> (PlaneShift)
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The maximum SF source attribute is necessary to compute the Vertex URB
read length properly, which will be done in the next commit.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The next patch will benefit from easy access to the source attribute
number and whether or not we're swizzling. It doesn't want the final
attr_override DWord form, however.
NOTE: This is a candidate for all stable branches.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Back when ir_var_in and ir_var_out signified both function parameters
and shader input/outputs, we had trouble distinguishing the two when
looking at a dereference. Now that we have separate ir_var_shader_in
and ir_var_shader_out modes, we can determine this easily.
Removing the hash table saves memory and CPU overhead.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes resource leak defect reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The third argument of AC_ARG_WITH is evaluated for any provided value,
not only on --with-, so it must not force-enable the feature
Also, setting $with_llvm_shared_libs in the opencl check was overriding
the user switch
https://bugs.freedesktop.org/show_bug.cgi?id=59851
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Save miptree level info to DRIImage:
- Appropriately-aligned base offset pointing to the image
- Additional x/y adjustment offsets from above.
v8: -Bump intelImageExtension version
v9: -Don't use internal _eglError but implement error reporting in new DRI inteface
instead. This fixes Android build problems based on feedback from
Adrian M Negreanu and Chad Versace.
-Move the non-tile-aligned check and error-reporting to intel_set_texture_image_region
v10: -Don't #include "egl/main/eglcurrent.h". [chadv]
Reviewed-by: Eric Anholt <eric@anholt.net> (v6)
Acked-by: Chad Versace <chad.versace@linux.intel.com> (v10)
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
We need to take account the offset from original bo when using glTexSubImage()
and other functions that manipulate the subregion of an exported texture.
Offsets are appended to mapped region address and when blitting from a source
region.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
When binding a region to a texture image, re-create the miptree base-level
considering the offset and dimension information exported by DRIImage.
v8: - Move the alignment surface address checks from the image-from-texture
code to the texture-from-image side. This allows the error reporting to conform to
OES_EGL_Image and to prevent mixing up EGL and GL errors. Reported by Chad Versace.
- Addressed an existing issue in renderbuffer case where there is a
a possibility of creating EGL images out of depthstencil textures which isn't
really possible. This was spotted by Eric earlier.
Reviewed-by: Eric Anholt <eric@anholt.net> (v6)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v8)
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
If the offsets are present, this lets us specify a particular level and slice
in a shared region using the base level of an exported mip-map tree.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Add helper to calculate fine-grained x and y adjustment pixels
to an image within a miptree level for tiled regions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
v8: - Append has_depthstencil field in DRIImage structure.
Reviewed-by: Eric Anholt <eric@anholt.net> (v6)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v8)
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Add create image from texture extension and bump version.
v8: - Add appropriate image errors codes in DRI interface so we don't
have to use internal EGL functions in driver. Suggested by Chad Versace.
Reviewed-by: Eric Anholt <eric@anholt.net> (v6)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v8)
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Was broken since commit bf469f4edc
('gallium: add void *user_buffer in pipe_index_buffer').
Fixes 11 piglit tests and lots of missing geometry e.g. in TORCS.
NOTE: This is a candidate for the 9.1 branch.
The svga device doesn't handle them. Replace with zeros.
Fixes several piglit tests, such as "glsl-const-builtin-inversesqrt".
Reviewed-by: Reviewed-by: José Fonseca <jfonseca@vmware.com>
glRasterPos doesn't exist in the core profile.
NOTE: This is a candidate for the stable branches (9.0 and 9.1).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This along with the latest drm-fixes branch should help with bad performance
of MSAA. Remember: Nx MSAA can't be more than N times slower (where N=2,4,6).
Anyway, I recommend at least 512 MB of VRAM for Full HD 6x MSAA.
NOTE: This is a candidate for the 9.1 branch.
GLX uses mapi/glapi/libglapi.la, which is only built for OpenGL.
If the user specified --enable-xlib-glx --disable-opengl, error out, as these
cannot be both observed at the same time. If the user just specified
--disable-opengl but not --disable-glx, print a warning and disable GLX as
well.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59364
Tested-by: Tom Stellard <thomas.stellard@amd.com>
R600_DUMP_SHADERS environment var now allows to choose dump method:
0 (default) - no dump
1 - full dump (old dump)
2 - disassemble
3 - both
v2: fix output for burst_count > 1
v3: use more human-readable output for kcache data in CF_ALU_xxx clauses,
improve output for ALU_EXTENDED, other minor fixes
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
v3: added some flags including condition codes for ALU,
fixed issue with CF reverse lookup (overlapping ranges of CF_ALU_xxx
and other CF instructions)
rebased on current master
Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>
We are now seing cs that can go over the vram+gtt size to avoid
failing flush early cs that goes over 70% (gtt+vram) usage. 70%
is use to allow some fragmentation.
The idea is to compute a gross estimate of memory requirement of
each draw call. After each draw call, memory will be precisely
accounted. So the uncertainty is only on the current draw call.
In practice this gave very good estimate (+/- 10% of the target
memory limit).
v2: Remove left over from testing version, remove useless NULL
checking. Improve commit message.
v3: Add comment to code on memory accounting precision
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
This reverts commit 2906e2034c.
Fixes a regression in the glean depthStencil test.
Reverting this does not affect any tests in es3conform, so a more recent
patch must have also fixed the failure this one was intended to fix.
Reported-by: lu hua <huax.lu@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59494
