Instead of SDWA v_mov_b32/v_xor_b32, we can use a combination of
v_add_u16/v_sub_u16 (add/sub swap, similar to xor swap) and v_perm_b32
with a literal.
I don't know yet if GFX11 adds any new instructions which makes this
easier, but this approach should have full functionality.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16595>
I think v_mov_b32 was only used because a sub-dword p_parallelcopy
couldn't take constants on some gfx levels. That shouldn't be the case
anymore.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16595>
GLSL says that indexing in a samplers array should be done with
a dynamically uniform value.
If the app doesn't obey this constraint, it'll get incorrect
results.
But there's one case where the app might be correct and yet
get incorrect result: if 2 consecutive draws are used, with no
state changes in between, the hardware might run them in the
same wave and the app will get incorrect result as-if it was
using non-dynamically uniform index.
To prevent this, this commit takes advantage of the divergence
analysis pass - if the index is marked as divergent, then it will
have the same effect as using ACCESS_NON_UNIFORM in SPIR-V.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16709>
For the sake of consistency, do not rely on a 1-dimensional
workgroup ID anymore.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16721>
Unfortunately, radv_lower_multiview is not suitable for mesh shaders
because it can't know the mapping between API mesh shader
invocations and output primitives.
Additionally, when lowering view id to layer, it must be created
as a per-primitive PS input.
Fixes: d32656bc65
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16504>
Fix defects reported by Coverity Scan.
Uninitialized scalar field (UNINIT_CTOR)
uninit_member: Non-static class member m_numPkrLog2 is not initialized in this constructor nor in any functions that it calls.
uninit_member: Non-static class member m_numSaLog2 is not initialized in this constructor nor in any functions that it calls.
Fixes: 4fdf42b3c2 ("amd: import gfx11 addrlib")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16679>
Use vk_buffer as a base for radv_buffer and
replace manual handling of VK_WHOLE_SIZE with
vk_buffer_range.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16764>
This will allow to translate the function and factors earlier.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16672>
These tests are flaky due to missing barriers, exposed by 211db6d333
("radv: Fix redundant subpass barriers due to erroneous comparison").
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16762>
These tests are flaky and should not be treated as expected-fail.
This also removes the duplicates from the fail list which was breaking CTS
runner.
Fixes: cd14431b8c ("radv/ci: skip dEQP-VK.fragment_operations.transient_attachment_bit")
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16762>
There is also a hypothetical scenario where
transformData is 0 and transformOffset is not 0
and we end up reading from transformOffset because
transform_addr is not 0.
VkAccelerationStructureBuildRangeInfoKHR spec:
If VkAccelerationStructureGeometryTrianglesDataKHR::transformData is not NULL, a single VkTransformMatrixKHR structure is consumed from VkAccelerationStructureGeometryTrianglesDataKHR::transformData, at an offset of transformOffset. This matrix describes a transformation from the space in which the vertices for all triangles in this geometry are described to the space in which the acceleration structure is defined.
Which I think means, that we should ignore
transformOffset if transformData is NULL.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16719>
VkAccelerationStructureBuildRangeInfoKHR spec:
If the geometry uses indices, primitiveCount × 3 indices are consumed from VkAccelerationStructureGeometryTrianglesDataKHR::indexData, starting at an offset of primitiveOffset. The value of firstVertex is added to the index values before fetching vertices.
If the geometry does not use indices, primitiveCount × 3 vertices are consumed from VkAccelerationStructureGeometryTrianglesDataKHR::vertexData, starting at an offset of primitiveOffset + VkAccelerationStructureGeometryTrianglesDataKHR::vertexStride × firstVertex.
Meaning: We always add firstVertex * vertexStride
to the vertex address and add primitiveOffset
either to the vertex address or the index address,
depending on wether indices are used.
Also add missing handling with instances.
Fixes: 0dad88b ("radv: Implement device-side BVH building.")
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16719>
We accidentally compared the stencil layout to the color/depth layout.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16663>
The VRS image no longer uses HTILE like on GFX10.3 and I don't know
yet how to program it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16557>
No FMASK on GFX11 which means I don't think we can expose this ext.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16557>
GFX11 doesn't support CB_RESOLVE which means it doesn't support the
hardware resolve path. If necessary (for arrays or integer formats)
the driver will select the compute path.
No CTS regressions by forcing the fragment resolve path on GFX10.3
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16557>
Found these by diffing the list of registers between GFX10_3 and GFX11.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16557>
According to the Vulkan spec 21.4 "Conditional Rendering",
only clearing attachments with vkCmdClearAttachments is subject to
conditional rendering.
Subpass clear and vkCmdClearColorImage / vkCmdClearDepthStencilImage
should always be executed even if it happens in a
conditional rendering block.
Cc: mesa-stable
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16654>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16702>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16702>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16702>
In some scenario ac_init_llvm_target may be called twice,
but the LLVM library won't have been unloaded between
the 2 calls, leading to a LLVM warning being printed.
Example pseudo-code to trigger this for radeonsi:
gbm_create_device();
eglInitialize();
eglTerminate();
gbm_device_destroy();
gbm_create_device();
eglInitialize();
eglTerminate();
gbm_device_destroy();
To avoid the warning message from LLVM, clear the command line
parser state before calling LLVMParseCommandLineOptions.
This might fix https://gitlab.freedesktop.org/mesa/mesa/-/issues/5960
This is done only on LLVM 12+ because it seems to break some apps
on LLVM 11 (there has been some work post LLVM 11 release to refactor
CommandLine.cpp, see 42f588f39c5c and the following commits).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16587>
This method isn't part of the C API but we can still use it and
avoid getting error messages from the command line parser:
mesa: for the [...]: may only occur zero or one times
We could call it at the beginning of ac_init_llvm_target but
this may hide some real bugs so let drivers call it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16587>
