These were updated in version 1.1.106 of vulkan.h to make more sense
with the extension names. We may as well keep with the times.
See also: 90108deb27 "anv: Update to use the new features struct names"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This enables the remaining capabilities in SPV_EXT_descriptor_indexing.
Fixes: 0e10790558 "radv: Enable VK_EXT_descriptor_indexing."
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
One special case, `src/util/xmlpool/.gitignore` is not entirely deleted,
as `xmlpool.pot` still gets generated (eg. by `ninja xmlpool-pot`).
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
https://reviews.llvm.org/rL356946 (present in LLVM 9 and later) changed
the meaning of the "system" sync scope, making it no longer restricted to
the memory operation's address space. So a single address space sync scope
is needed for shared atomic operations (such as "system-one-as" or
"workgroup-one-as") otherwise buffer_wbinvl1 and s_waitcnt instructions
can be created at each shared atomic operation.
This mostly reimplements LLVMBuildAtomicRMW and LLVMBuildAtomicCmpXchg
to allow for more sync scopes and uses the new functions in ac->nir with
the "workgroup-one-as" or "workgroup" sync scopes.
F1 2017 (4K, Ultra High settings, TAA), avg FPS : 59 -> 59.67 (+1.14%)
Strange Brigade (4K, ~highest settings), avg FPS : 51.5 -> 51.6 (+0.19%)
RotTR/mountain (4K, VeryHigh settings, FXAA), avg FPS : 57.2 -> 57.2 (+0.0%)
RotTR/tomb (4K, VeryHigh settings, FXAA), avg FPS : 42.5 -> 43.0 (+1.17%)
RotTR/valley (4K, VeryHigh settings, FXAA), avg FPS : 40.7 -> 41.6 (+2.21%)
Warhammer II/fallen, avg FPS : 31.63 -> 31.83 (+0.63%)
Warhammer II/skaven, avg FPS : 37.77 -> 38.07 (+0.79%)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Before setting the physical device API version, we should check if the
MESA_VK_VERSION_OVERRIDE environment variable is set and take it into
account.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This enabled the basic YCBCR features.
We support basic multiplane formats using 8-bit and 16-bit unorms, as
well as YUV2 formats.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
No functional changes. This temporarily uses plane 0 for
everything.
Long term plan is that only single plane images get to use
metadata like htile/dcc/cmask/fmask.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The dri options are optional. When the dri options are not provided
the WSI will not use adaptive sync.
FWIW I think for xf86-video-amdgpu this still requires an X11 config
option, so only people who opt in can get possible regressions from this.
So then the remaining question is: why do this in the WSI?
It has been suggested in another MR that the application sets this.
However, I disagree with that as I don't think we'll ever get a
reasonable set of applications setting it.
The next questions is whether this can be a layer. It definitely
can be as implemented now. However, I think this generally fits
well with the function of the WSI. Furthemore, for e.g. the DISPLAY
WSI this is much harder to do in a layer.
Of course, most of the WSI could almost be a layer, but I think
this still fits best in the WSI.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This includes 0 options.
The cache parsing is located at a position where we can easily add
config filtering by VkApplicationInfo.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Only computeDerivativeGroupLinear is supported for now.
All crucible tests pass.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Basically just reserve the memory in the descriptor sets.
On the shader side we construct a buffer descriptor, since
AFAIU VGPR indexing on 32-bit pointers in LLVM is still broken.
This fully supports update after bind and variable descriptor set
sizes. However, the limits are somewhat arbitrary and are mostly
about finding a reasonable division of a 2 GiB max memory size over
the set.
v2: - rebased on top of master (Samuel)
- remove the loading resources rework (Samuel)
- only load UBO descriptors if it's a pointer (Samuel)
- use LLVMBuildPtrToInt to avoid IR failures (Samuel)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v2)
This is actually fixed now.
This change requires LLVM r358579. Make sure to have it in
your tree, otherwise the following piglit will hang:
tests/spec/arb_shader_storage_buffer_object/execution/ssbo-atomicCompSwap-int.shader_test
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
They are buggy with older LLVM version, see r358579.
Fixes: 78c551aca1 ("ac/nir: use new LLVM 8 intrinsics for SSBO atomics except cmpswap")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
They are buggy with LLVM 8 because they weren't marked as source
of divergence, see r358579.
Fixes: dd0172e865 ("radv: Use structured intrinsics instead of indexing workaround for GFX9.")"
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This changes requires LLVM r356465.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This changes requires LLVM r356465.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
LLVM 9+ now supports 8-bit and 16-bit types.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
No support for 64-bit compare&swap atomic operations.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Except compare&swap which is still buggy.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Use the raw version (ie. IDXEN=0) because vindex is unused.
Use the old intrinsic for compare&swap because the new one
hangs the GPU for some reasons.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Both Vulkan and OpenGL might be using glsl_types simultaneously or we
can also have multiple concurrent Vulkan instances using glsl_types.
Patch adds a one time init to track number of users and will release
types only when last user calls _glsl_type_singleton_decref().
This change fixes glsl_type memory leaks we have with anv driver.
v2: reuse hash_mutex, cleanup, apply fix also to radv driver and
rename helper functions (Jason)
v3: move init, destroy to happen on GL context init and destroy
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Matt Turner <mattst88@gmail.com>
Even if we don't use local buffers in general. Turns out that even
though the performance is not the best the kernel still does it
better than our own list.
We still have to keep the radv bo list for buffers that are shared
externally.
This improves Talos on lowest quality setting (so as CPU bound as
possible) by ~10% if the global bo list is enabled.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
In radv we had a separate flag to actually use it + an env option
to experimentally use it.
The common code setting has_local_buffers to false of course broke
that experimental option.
Also the "enable on APU" did not make sense for RADV as it is still
disabled by default.
Fixes: b21a4efb55 "radv/winsys: allow local BOs on APUs"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
