The device info initializer makes several fuctions internal:
- handling of device override
- updating topology from kernel information
The implementation file is slightly reordered due to the renamed
functions being static.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Rename the original device info initialization routine so callers
don't mistakenly call the wrong one:
gen_get_device_info_from_fd:
Queries kernel for full device info, including topology
details.
gen_get_device_info_from_pci_id:
Partially initializes device info based on PCI ID lookup, when
the kernel is not available.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
With perf queries, initializing the device info is much more complex
than just getting a PCI ID and calling gen_get_device_info. This commit
adds a new gen_get_device_info_from_fd helper in common code which does
all of the requisite kernel queries to get device info including all of
the topology information.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
For now, this keeps the "100 bytes" allocation; we can try to figure out
the correct size as a follow up.
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
add a new attribute, 'disable_ccs_repack' to gen_device info, which
indicates whether repacking of components in certain pixel formats
before compression needs to be disabled to keep the compatibility
with decompression capability of display controller (gen11+)
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This prints a log of every PIPE_CONTROL flush we emit, noting which bits
were set, and also the reason for the flush. That way we can see which
are caused by hardware workarounds, render-to-texture, buffer updates,
and so on. It should make it easier to determine whether we're doing
too many flushes and why.
Our tessellation control shaders can be dispatched in several modes.
- SINGLE_PATCH (Gen7+) processes a single patch per thread, with each
channel corresponding to a different patch vertex. PATCHLIST_N will
launch (N / 8) threads. If N is less than 8, some channels will be
disabled, leaving some untapped hardware capabilities. Conditionals
based on gl_InvocationID are non-uniform, which means that they'll
often have to execute both paths. However, if there are fewer than
8 vertices, all invocations will happen within a single thread, so
barriers can become no-ops, which is nice. We also burn a maximum
of 4 registers for ICP handles, so we can compile without regard for
the value of N. It also works in all cases.
- DUAL_PATCH mode processes up to two patches at a time, where the first
four channels come from patch 1, and the second group of four come
from patch 2. This tries to provide better EU utilization for small
patches (N <= 4). It cannot be used in all cases.
- 8_PATCH mode processes 8 patches at a time, with a thread launched per
vertex in the patch. Each channel corresponds to the same vertex, but
in each of the 8 patches. This utilizes all channels even for small
patches. It also makes conditions on gl_InvocationID uniform, leading
to proper jumps. Barriers, unfortunately, become real. Worse, for
PATCHLIST_N, the thread payload burns N registers for ICP handles.
This can burn up to 32 registers, or 1/4 of our register file, for
URB handles. For Vulkan (and DX), we know the number of vertices at
compile time, so we can limit the amount of waste. In GL, the patch
dimension is dynamic state, so we either would have to waste all 32
(not reasonable) or guess (badly) and recompile. This is unfortunate.
Because we can only spawn 16 thread instances, we can only use this
mode for PATCHLIST_16 and smaller. The rest must use SINGLE_PATCH.
This patch implements the new 8_PATCH TCS mode, but leaves us using
SINGLE_PATCH by default. A new INTEL_DEBUG=tcs8 flag will switch to
using 8_PATCH mode for testing and benchmarking purposes. We may
want to consider using 8_PATCH mode in Vulkan in some cases.
The data I've seen shows that 8_PATCH mode can be more efficient in
some cases, but SINGLE_PATCH mode (the one we use today) is faster
in other cases. Ultimately, the TES matters much more than the TCS
for performance, so the decision may not matter much.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The issue is noticeable in the
dEQP-GLES31.functional.geometry_shading.layered.render_with_default_layer_3d
test where a triangle goes missing when we use the maximum number of
URB entries as specified by the documentation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107505
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
There was an assumption that num_thread_per_eu would be set in the
Gen8 features. Since this is mostly the same of all gen8->11 (except
GEN9_LP that overwrites it) let's just factor it out.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Anuj Phogat anuj.phogat@gmail.com
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There was an issue recently caused by the system header being included
by mistake, so let's just get rid of this include path and always
explicitly #include "drm-uapi/FOO.h"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
This follows the ids and approach used on kernel's commit
b9be78531d27 ("drm/i915/whl: Introducing Whiskey Lake platform")
and commit c1c8f6fa731b ("drm/i915: Redefine some Whiskey Lake SKUs")
v2: Lionel noticed that GT{1,2,3} on kernel wasn't following
spec when looking to number of EUs, so kernel has been updated.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
This follows the ids and approach used on kernel's commit
e364672477a1 ("drm/i915/aml: Introducing Amber Lake platform")
Reported-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
2x6 configuration with pci-id 0x3185 has same number of
banks (2) as 3x6 configuration (pci-id 0x3184).
Reported-by: Clayton Craft <clayton.a.craft@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: eb23be1d97 "i965: Add and initialize l3_banks field for gen7+"
Cc: Francisco Jerez <currojerez@riseup.net>
It's just not possible to have a device with no subslices.
CID: 1433511
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
I forgot to change the assert in the second helper function in a
previous change.
This hit the assert() on a Broadwell platform with 1 slice, 3
subslices but all EUs disabled in subslice 1 & 2.
Fixes: c1900f5b0f ("intel: devinfo: add helper functions to fill fusing masks values")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With the introduction of asymmetric slices in CNL, we cannot rely on
the previous SUBSLICE_MASK getparam to tell userspace what subslices
are available.
We introduce a new uAPI in the kernel driver to report exactly what
part of the GPU are fused and require this to be available on Gen10+.
Prior generations can continue to rely on GETPARAM on older kernels.
This patch is quite a lot of code because we have to support lots of
different kernel versions, ranging from not providing any information
(for Haswell on 4.13 through 4.17), to being able to query through
GETPARAM (for gen8/9 on 4.13 through 4.17), to finally requiring 4.17
for Gen10+.
This change stores topology information in a unified way on
brw_context.topology from the various kernel APIs. And then generates
the appropriate values for the equations from that unified topology.
v2: Move slice/subslice masks fields to gen_device_info (Rafael)
v3: Add a gen_device_info_subslice_available() helper (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There are a couple of ways we can get the fusing information from the
kernel :
- Through DRM_I915_GETPARAM with the SLICE_MASK/SUBSLICE_MASK
parameters
- Through the new DRM_IOCTL_I915_QUERY by requesting the
DRM_I915_QUERY_TOPOLOGY_INFO
The second method is more accurate and also gives us the EUs fusing
masks. It's also a requirement for CNL as this platform has asymetric
subslices and the first method SUBSLICE_MASK value is assumed uniform
across slices.
v2: Change gen_device_info_update_from_masks() to generate topology
and call into gen_device_info_update_from_topology (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Already available with the autotools build.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to store values coming from the kernel but as a first step, we
can generate mask values out the numbers already stored in the
gen_device_info masks.
v2: Add a helper to set EU masks (Lionel/Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be reused to store values reported by the kernel. The main
use case will be for use as the input values of the metric sets
equations for the INTEL_performance_queries extension. By storing this
information in the gen_device_info we make this non GL specific so
this can be reused by Vulkan if we ever have an equivalent extension.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On gen11+ AUX_HIZ is not a supported value for surfaces being
sampled by the 3D sampler.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
