Buffers that are not dedicated can also be used for CCS mapped images,
so they need to be aligned to the AUX-TT requirements.
GTK+ is running into such case where it creates an image with a CCS
modifier. When requesting the alignment through
vkGetImageMemoryRequirements() the 64KB/1MB alignment is returned, but
the binding fails with an assert because the VkDeviceMemory has not
been aligned to the AUX-TT requirement and we cannot disable CCS since
the modifier requires it.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4cdd3178fb ("anv: Meet CCS alignment reqs with dedicated allocs")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/10433
Reviewed-by: Jianxun Zhang <jianxun.zhang@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27258>
VK_ACCESS_2_SHADER_STORAGE_READ_BIT specifies read access to a
storage buffer, physical storage buffer, storage texel buffer, or
storage image in any shader pipeline stage.
Any storage buffers or images written to must be invalidated and
flushed before the shader can access them.
This fixes the following tests on LNL:
- dEQP-VK.synchronization2.op.single_queue.barrier.write\*_specialized_access_flag
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27212>
While enumerating devices on a system with multiple implementations,
unnecessary ioctls will be issued before a driver checks if it supports a
given device.
This patch makes the driver fail early based on a intel_device_info.ver
check with 2 new parameters added to intel_get_device_info_from_fd.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27166>
This adds a few new fields in the brw_cs_prog_data struct and then
uses them to fill in the relevant COMPUTE_WALKER fields.
Although the Tile Layout field theoretically has different settings for
32/64/128bpe, it appears that the recommended programming is to always
pick either TileY 32bpe or Linear. It's not very practical to look at
the surface formats involved, anyway.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27167>
We'll want to check for Alchemist and set various prog_data fields
in the next patch, in order to enable some optimizations. Passing
NULL for prog_data will remain valid and continue working as before.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27167>
num_syncs was being incremented by one if 'utrace_submit != NULL' but
a sync was only being set if also
'util_dynarray_num_elements(&utrace_submit->batch_bos) == 0'.
This mismatch could cause application to abort due to
'assert(count == num_syncs)'.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27244>
With regards to implicit masking of the shift counts for 8- and 16-bit
types, the PRMs are incorrect. They falsely state that on Gen9+ only the
low bits of src1 matching the size of src0 (e.g., 4-bits for W or UW
src0) are used. The Bspec (backed by data from experimentation) state
that 0x3f is used for Q and UQ types, and 0x1f is used for **all** other
types.
To match the behavior expected for the NIR opcodes, explicit masks for
8- and 16-bit types must be added.
This fixes (the updated version, see crucible!138) of
func.shader.shift.int16_t on all Intel platforms. According to Karol,
this also fixes "integer_ops integer_rotate" tests in OpenCL CTS.
No shader-db or fossil-db changes on any Intel platform.
Tested-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23001>
Xe2+ changed the msaa mapping for 2D/3D Tile64 surfaces, introduce a
Xe2+ specific enum to handle this change.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27113>
Launch with :
$ MESA_VK_TRACE=rmv MESA_VK_TRACE_TRIGGER=/tmp/trig ./my_app
In another terminal, trigger a capture :
$ touch /tmp/trig
The application with create a snapshot and print out :
RMV capture saved to '/tmp/my_app_2024.01.19_10.56.33.rmv'
Then just open it with RMV :
./RadeonMemoryVisualizer /tmp/my_app_2024.01.19_10.56.33.rmv
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26843>
Prefix everything with anv_ so it doesn't clash with other drivers if
loaded in the same process.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26843>
This makes is possible to use GFX_VER macros in these functions.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21364>
We're missing the ISA code in renderdoc. You can reproduce with the
Sascha Willems graphics pipeline demo.
The change is large here because we have to fix a confusion between
anv_shader_bin & anv_pipeline_executable. anv_pipeline_executable is
there as a representation for the user and multiple
anv_pipeline_executable can point to a single anv_shader_bin.
In this change we split the anv_shader_bin related logic that was
added in anv_pipeline_add_executable*() and move it to a new
anv_pipeline_account_shader() function.
When importing RT libraries, we add all the anv_pipeline_executable
from the libraries.
When importing Gfx libraries, we add the anv_pipeline_executable only
if not doing link time optimization.
anv_shader_bin related properties are added whenever we're importing a
shader from a library, compiling or finding in the cache.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 3d49cdb71e ("anv: implement VK_EXT_graphics_pipeline_library")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26594>
- new LTS kernel releease
- i915 able to load firmwares from rootfs (loaded later, but gaining PM
firmware loading support also necessary for ADL to loadup)
- i915 screams that without THP may have degraded perf, let him have it
Signed-off-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27185>
This change moves the instance id gs_thread_payload constructor and
lowering code will simply use that.
Also, this change takes the Xe2 register width in consideration that
fixes a couple of tests involving geometry shaders with gl_InvocationID
on Xe2.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26960>
No driver supports urol/uror on all bit sizes. Intel gen11+ only for 16
and 32 bit, Nvidia GV100+ only for 32 bit. Etnaviv can support it on 8,
16 and 32 bit.
Also turn the `lower` into a `has` option as only two drivers actually
support `uror` and `urol` at this momemt.
Fixes crashes with CL integer_rotate on iris and nouveau since we emit
urol for `rotate`.
v2: always lower 64 bit
Fixes: fe0965afa6 ("spirv: Don't use libclc for rotate")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by (Intel and nir): Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27090>
A bit nicer than adding more and more arguments to the upload
function.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27188>
Otherwise the code generator will attempt to emit SIMD-lowered
QUAD_SWIZZLE instructions with an execution group not multiple of 8,
which is invalid on Xe2+.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27165>
While convenient, it was not necessary to use the mesa_scope in
intel_device_info.
Having a Intel specific enum here will help later the efforts
of serialization of intel_device_info.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27164>
Xe KMD reports SMEM size as half of RAM while i915 returns the whole
RAM size, so to keep it consistent here adjusting the values
returned by i915 KMD.
The free i915 SMEM also needs to be ajusted but as this is needed by
both KMDs because KMD uAPIs only reports free memory for applications
running elevated privileges, so this was moved to
intel_device_info_ajust_memory() to be shared by both KMD backends.
sram.mappable.size asserts had to be removed from i915 code paths
because of this adjustment.
anv_compute_sys_heap_size() was dropped in ANV and reduce in HASVK
because adjustments are now done in intel/dev level.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26567>
This function should only be used when i915 versions that don't have
DRM_I915_QUERY_MEMORY_REGIONS.
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26567>
When building the CFG the instructions are taken of the list in
fs_visitor and added to the lists inside each block. The single
"exec_node" in the instruction is used for those memberships.
In the case the pass rebuilt the CFG, it had no instructions, so
calculate_cfg() had nothing to work with. For now fix the bug by
pulling all the instructions back to the original list.
We can do better here, but punting until upcoming work on
CFG itself.
Issue found in an unpublished CTS test. Small reproduction in our
unit tests now enabled.
Fixes: 65237f8bbc ("intel/fs: Don't add MOV instructions to DO blocks in combine constants")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27131>
Add a simple test to kick off the infrastructure. And also a test
(for now disabled) that fails because the code is returning an
empty shader. Next patch will fix and enable it.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27131>
