Many users of nir_vec() do so by nir_channel()-ing a new ssa defs as movs
from other vectors to put the new vector together, which then just have to
get copy-propagated into the ALU srcs and DCEed away the temporary movs.
If they instead take nir_ssa_scalar, we can avoid that extra work.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14865>
"queueFamilyIndexCount is the number of queue families having access to the image(s) of the
swapchain when imageSharingMode is VK_SHARING_MODE_CONCURRENT.
pQueueFamilyIndices is a pointer to an array of queue family indices having access to the
images(s) of the swapchain when imageSharingMode is VK_SHARING_MODE_CONCURRENT."
If the type isn't concurrent, don't attempt to access the arrays.
dEQP-VK.wsi.xlib.swapchain.create.exclusive_nonzero_queues on lavapipe.
Fixes: 5b13d74583 ("vulkan/wsi/drm: Break create_native_image in pieces")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15101>
We were just emitting the bad reloc (either an assert fail on a debug
build or for a release build likely a GPU hang from the resulting fault).
Given that the GLES 3.2 spec's robust context requirement says we should
return undefined data but not terminate for element indices outside of the
VB, ignoring the offset in this case seems like a better behavior to have
in all cases.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15198>
We only have a single prog_data::total_scratch for all shader variants
(SIMD 8, 16, 32). Therefore we should always max the total_scratch on
top of existing variant.
We probably haven't run into that issue before because we compile by
increasing SIMD size and higher SIMD size is more likely to spill. But
for bindless shaders with return shaders, if the last return part
doesn't spill, we completely ignore the previous parts' scratch
computation.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15193>
Seems we already had implemented this feature (see commit 521e1d0275
"broadcom/vc5: Add support for anisotropic filtering"), but we didn't
enable the proper capability.
Also update the maximum level of anistropy supported.
Fixes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4201
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15180>
Also change the code to preserve certain metadata: control flow is not changed
so both block indices and dominance information is preserved.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15206>
Now that we don't sort our nodes we can arrange them so we can
easily translate between nodes and temps without a mapping table,
just applying an offset.
To do this we have a single array of nodes where twe put first the nodes
for accumulators and then the nodes for temps. With this setup we can
ensure that for any given temp T, its node is always T + ACC_COUNT.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
Nodes are allocated in order to registers so initially sorting
was used to ensure that nodes with smaller life ranges would
be assigned first and therefore be more likely to get
accumulators.
However, since d81a6e5f1d now we don't rely on order to make
decisions about accumulators and instead we make policy decisions
based on actual liveness, so sorting is no longer strictly
relevant to this decision.
Furthermore, we are not re-sorting nodes after each spill either,
since that would probably require that we rebuild the interference
graph after each spill (the graph identifies nodes by their index).
Shader-db results show a significant improvement in instruction
counts, due to more optimal accumulator assignments. The reason for
this is that we use a round-robin policy for choosing the next
accumulator to assign. The idea behind this is preventing nearby
temps to be assigned to the same accumulator so that QPU scheduling
is more flexible, but if we sort our nodes, we are basically not
assigning temps in program order any more and the round-robin policy
becomes less effective:
total instructions in shared programs: 13000420 -> 12663189 (-2.59%)
instructions in affected programs: 11791267 -> 11454036 (-2.86%)
helped: 62890
HURT: 19987
total threads in shared programs: 415874 -> 415870 (<.01%)
threads in affected programs: 20 -> 16 (-20.00%)
helped: 2
HURT: 4
total uniforms in shared programs: 3711652 -> 3711624 (<.01%)
uniforms in affected programs: 43430 -> 43402 (-0.06%)
helped: 134
HURT: 173
total max-temps in shared programs: 2144876 -> 2138822 (-0.28%)
max-temps in affected programs: 123334 -> 117280 (-4.91%)
helped: 4112
HURT: 1195
total spills in shared programs: 3870 -> 3860 (-0.26%)
spills in affected programs: 1013 -> 1003 (-0.99%)
helped: 14
HURT: 12
total fills in shared programs: 5560 -> 5573 (0.23%)
fills in affected programs: 1765 -> 1778 (0.74%)
helped: 14
HURT: 17
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
For us they are basically uniforms too so we want to make their
lifespans short to facilitate allocating them to accumulators.
total instructions in shared programs: 13043585 -> 13015385 (-0.22%)
instructions in affected programs: 8326040 -> 8297840 (-0.34%)
helped: 24939
HURT: 19894
total threads in shared programs: 415860 -> 415858 (<.01%)
threads in affected programs: 4 -> 2 (-50.00%)
helped: 0
HURT: 1
total uniforms in shared programs: 3721953 -> 3720451 (-0.04%)
uniforms in affected programs: 96134 -> 94632 (-1.56%)
helped: 744
HURT: 435
total max-temps in shared programs: 2173431 -> 2154260 (-0.88%)
max-temps in affected programs: 264598 -> 245427 (-7.25%)
helped: 10858
HURT: 841
total spills in shared programs: 4005 -> 4010 (0.12%)
spills in affected programs: 700 -> 705 (0.71%)
helped: 5
HURT: 10
total fills in shared programs: 5801 -> 5817 (0.28%)
fills in affected programs: 1346 -> 1362 (1.19%)
helped: 6
HURT: 11
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
If we are compiling with a strategy that does not allow TMU spills
we should not allow spilling anything that is not a uniform.
Otherwise the RA cost/benefit algorithm may choose to spill a
temp that is not uniform and that will cause us to immediately
fail the strategy and fallback to the next one, even if we
could've instead chosen to spill more uniforms to compile the
program successfully with that strategy.
Some relevant shader-db stats:
total instructions in shared programs: 13040711 -> 13043585 (0.02%)
instructions in affected programs: 234238 -> 237112 (1.23%)
helped: 73
HURT: 172
total threads in shared programs: 415664 -> 415860 (0.05%)
threads in affected programs: 196 -> 392 (100.00%)
helped: 98
HURT: 0
total uniforms in shared programs: 3717266 -> 3721953 (0.13%)
uniforms in affected programs: 12831 -> 17518 (36.53%)
helped: 6
HURT: 100
total max-temps in shared programs: 2174177 -> 2173431 (-0.03%)
max-temps in affected programs: 4597 -> 3851 (-16.23%)
helped: 79
HURT: 21
total spills in shared programs: 4010 -> 4005 (-0.12%)
spills in affected programs: 55 -> 50 (-9.09%)
helped: 5
HURT: 0
total fills in shared programs: 5820 -> 5801 (-0.33%)
fills in affected programs: 186 -> 167 (-10.22%)
helped: 5
HURT: 0
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
Our cost was 5 which matches the number of instructions we have to
add for a TMU spill (a fill is 4 instructions).
Uniform spills on the other hand add an extra instruction for each
fill and remove one instruction for the spill itself. These have
a cost of 1.
Therefore, if we have a single spill+fill, we end up with +9
instructions if it is a TMU spill and +0 instructions with a uniform
spill, so making the former only 5 times more costly is probably
not a good idea, and this is without even considering the added
latency of the TMU accesses.
Relevant shader-db changes show this causes as a marginal instruction
count increase in a few shaders but better thread counts and lower
TMU spilling overall:
total instructions in shared programs: 13037315 -> 13040711 (0.03%)
instructions in affected programs: 370106 -> 373502 (0.92%)
helped: 187
HURT: 321
total threads in shared programs: 415090 -> 415664 (0.14%)
threads in affected programs: 574 -> 1148 (100.00%)
helped: 287
HURT: 0
total uniforms in shared programs: 3706674 -> 3717266 (0.29%)
uniforms in affected programs: 63075 -> 73667 (16.79%)
helped: 40
HURT: 395
total max-temps in shared programs: 2176080 -> 2174177 (-0.09%)
max-temps in affected programs: 15838 -> 13935 (-12.02%)
helped: 316
HURT: 34
total spills in shared programs: 4247 -> 4010 (-5.58%)
spills in affected programs: 2599 -> 2362 (-9.12%)
helped: 107
HURT: 14
total fills in shared programs: 6121 -> 5820 (-4.92%)
fills in affected programs: 3622 -> 3321 (-8.31%)
helped: 108
HURT: 13
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15168>
The problem is that dirty_states must be 0 for any state that is NULL
in "queued". This code was flagging dirty_states for such states because
it was only looking at "emitted". It should have been looking at "queued".
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15209>
moved from radeonsi without the vectorization, which won't be needed for
now. We will lower IO in st/mesa instead of radeonsi to get the transform
feedback info into store instructions.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
NIR now fully contains pipe_stream_output_info in shader_info and IO
intrinsics if lower_io_variables is true. radeonsi will not use
pipe_stream_output_info after this, and other drivers are free to follow
that.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
For dmabuf imports, configure the primary surface without support for
compression if the modifier doesn't specify it. This helps to create VkImages
with memory requirements that are compatible with the buffers apps provide.
Suggested-by: Philip Langdale <philipl@overt.org>
Cc: 22.0 <mesa-stable>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5940
Tested-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15181>
Use a variable to store the anv_image_create_info struct. We'll modify it for a
bug fix in the next patch.
Cc: 22.0 <mesa-stable>
Tested-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15181>
Replace the create_info parameter with isl_extra_usage_flags to more closely
match the parameters of explicit layout function.
Tested-by: Philip Langdale <philipl@overt.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15181>
