The innermost check was added to stop us from unrolling multiple
loops in a single pass, and to stop outer loops from unrolling.
When we successfully unroll a loop we need to run the analysis
pass again before deciding if we want to go ahead an unroll a
second loop.
However the logic was flawed because it never tried to unroll any
nested loops other than the first innermost loop it found.
If this innermost loop is not unrolled we end up skipping all
other nested loops.
This unrolls a loop in a Deus Ex: MD shader on ultra settings and
also unrolls a loop in a shader from the game Prey when running
on DXVK.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
At the moment, depending on pipe transfer flags, the dumb
buffer map address can end up at either kms_sw_dt->ro_mapped
or kms_sw_dt->mapped.
When it's time to unmap the dumb buffer, both locations get unmapped,
even though one is probably initialized to 0.
That leads to the code segment getting unmapped at runtime and
crashes when trying to call into unrelated code.
This commit addresses the problem by using MAP_FAILED instead of
NULL for ro_mapped and mapped when the dumb buffer is unmapped,
and only unmapping mapped addresses at unmap time.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107098
Signed-off-by: Ray Strode <rstrode@redhat.com>
Fixes: d891f28df9 ("gallium/winsys/kms: Fix possible leak in map/unmap.")
Cc: Lepton Wu <lepton@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
drirc implementation of MESA_LOADER_DRIVER_OVERRIDE which can be
used to override dri driver to load.
Usage:
override dri driver for device with spec kernel driver name:
<device kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
or
<device driver="loader" kernel_driver="kernel_driver_name">
<option name="dri_driver" value="new_dri_driver" />
</device>
v2:
add kernel_driver device attribute to specify kernel
driver name instead of reuse driver attribute
v3:
seperate loader_get_kernel_driver_name into another patch
seperate add kernel_driver attribute into another patch
Suggested-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[v4 Emil: add HAVE_LIBDRM guard around __driConfigOptionsLoader and
loader_get_dri_config_driver]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This attribute can be used by loader to apply different
option to device use specific kernel driver.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This function can be shared by the following kernel_driver
drirc patch.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
${sysconfdir} is for store admin config files, so move
this mesa default config file to ${datadir}/drirc.d.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Driver and application can put their drirc files in
${datadir}/drirc.d/ with name xxx.conf. Config files
will be read and applied in file name alphabetic order.
So there are three places for drirc listed in order:
1. /usr/share/drirc.d/
2. /etc/drirc
3. ~/.drirc
v4:
fix meson build
v3:
1. seperate driParseConfigFiles refine into another patch
2. fix entries[i] mem leak
v2:
drop /etc/drirc.d
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Also prepare for the usage of following parseConfigDir patch.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil: add #include <limits.h>]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This allows us to use the link-optimized shader for determining binding
table layouts and, more importantly, URB layouts. For apps running on
DXVK, this is extremely important as DXVK likes to declare max-size
inputs and outputs and this lets is massively shrink our URB space
requirements.
VkPipeline-db results (Batman pipelines only) on KBL:
total instructions in shared programs: 820403 -> 790008 (-3.70%)
instructions in affected programs: 273759 -> 243364 (-11.10%)
helped: 622
HURT: 42
total spills in shared programs: 8449 -> 5212 (-38.31%)
spills in affected programs: 3427 -> 190 (-94.46%)
helped: 607
HURT: 2
total fills in shared programs: 11638 -> 6067 (-47.87%)
fills in affected programs: 5879 -> 308 (-94.76%)
helped: 606
HURT: 3
Looking at shaders by hand, it makes the URB between TCS and TES go from
containing 32 per-vertex varyings per tessellation shader pair to a more
reasonable 8-12. For a 3-vertex patch, that's at least half the URB
space no matter how big the patch section is.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We want these to be set as close to the final compile as possible so
that they are guaranteed to happen after nir_shader_gather_info is
called. The next commit is going to move nir_shader_gather_info to
after the linking step which makes this necessary.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This commit makes three changes. One is to only walk the descriptors once
and set bind map sizes at the same time as filling out the entries. The
second is to make the pass additive so that we can put stuff in the bind
map before applying the pipeline layout. Third, we switch to using
designated initializers.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Because lower_ycbcr gets called before apply_pipeline_layout, the
indices are all logical and the binding layout HW size is actually too
big for the bounds check. We should just use the regular logical array
size instead.
Fixes: f3e91e78a3 "anv: add nir lowering pass for ycbcr textures"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In commit bd27203f4d we changed this to
open in binary mode, to then explicitly decode the lines with the right
encoding.
Unfortunately, that broke the build on Windows, where the template file
can have '\r\n' as line terminators: opening in binary mode would keep
those terminators and break the regexp.
We need to go back to text mode, where the "universal newlines" mode
takes care of this.
However, to fix the initial issue, let's specify the encoding explicitly
when opening the file, and make sure it is open in text mode, so we only
get unicode strings.
Reviewed-by: Jose Fonseca <jfonseca@vmware>
When the number of unique BO is 0, we optimize the list creation
by copying all buffers of the current CS directly into it. But
this is only valid if the CS doesn't have virtual buffers,
otherwise they are not added and hw might report VM faults.
This fixes VM faults with:
dEQP-VK.sparse_resources.image_sparse_binding.2d.rgba8ui.1024_128_1
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This adds a freedreno backend for the a6xx generation GPUs, which at
the time of this commit is about 98% GLES2 conformant. Much remains to
be done - both performance work and feature work towards more recent
GLES versions, but this is a good start.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Suggested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
`device` is used 2 lines below, even visible in the diff context printed.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We have to do a fast-clear eliminate when clearing DCC
metadata with 0x20202020. I don't know if that fixes anything
but that seems correct to me.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This was missing when VK_EXT_conditional_rendering has been
implemented. The predication type should be -1 to avoid
restoring previous state when performing a decompression pass
with DCC enabled.
Note that we don't have to handle secondary command buffers
because we don't support this feature currently.
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Seems like DXVK depends on that and it might get reverted
upstream. Since apps are not supposed to use 0 in v2 anyway,
we should be safe implementing the old behavior there.
Fixes: 66e12451ac "radv: Update to new VK_EXT_vertex_attribute_divisor to version 2."
CC: 18.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Seems that in a single case we use the renderpass before checking
the pipeline, so check the renderpass before we use it.
Fixes: fbcd167314 "radv: Add on-demand compilation of built-in shaders."
Tested-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
When moving the array sizes from the old list to the new one it was
not taken into account that the array indices start with one, but the
array_size array started at index zero, which resulted in incorrect array
sizes when arrays were merged. Correct this by copying the array_size
values of the retained arrays with an offset of -1.
Also fix whitespaces for the replaced lines.
Fixes: d8c2119f9b
mesa/st/glsl_to_tgsi: Expose array live range tracking and merging
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Commit 4434591bf5 caused substantially more URB messages in
geometry and tessellation shaders. Before we can really enable this
sort of optimization, We either need some way of combining them back
together into vectors or we need to do cross-stage vector element
elimination without splitting everything into scalars.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107510
Fixes: 4434591bf5 "intel/nir: Call nir_lower_io_to_scalar_early"
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
If called with an empty size, brw_emit_buffer_surface_state asserts.
We already have a dedicated helper for uploading nothing, so let's use
that instead.
Avoids an assert in
dEQP-GLES31.functional.shaders.opaque_type_indexing.ssbo.const_literal_vertex
when running a debug build of i965.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Usage of number 4096 replaced by PAGE_SIZE.
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Kernel (for ppgtt) requires memory address to be
aligned to page size (4096).
-v2: added marking that also fixes initial commit 01058a5522.
-v3: numbers replaced by PAGE_SIZE; buffer-object size is aligned
instead of alignment of offsets (Chris Wilson).
-v4: changes related to PAGE_SIZE moved to separate commit
-v5: restored alignment to page-size for 0-size.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106997
Fixes: a363bb2cd0 (i965: Allocate VMA in userspace for full-PPGTT systems.)
Fixes: 01058a5522 (i965: Add virtual memory allocator infrastructure to brw_bufmgr.)
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Instead of doing conservative guesses, we should report the max levels
based on the max sizes we get from GL on the host.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
These macro-names are also used for softpipe, so let's avoid confusion
by avoiding them. Besides, they are just used in one place in virgl, so
let's just inline them into the place they are used instead.
While we're at it, fixup an error in the comment for the 3D version.
Mesa subtracts computes max-size by doing by 2^(n-1), which means this
should be 256 cubed, not 512 cubed. The other comments are correct.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jakob Bornecrantz <jakob@collabora.com>
