Move the ANGLE job to the new brask devices. Brask is significantly
slower than brya, so increase the parallelism accordingly.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
Add two new device types in LAVA, brask and nissa. These ADL devices will
be used to offload some of the jobs from brya.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
FDO_CI_CONCURRENT was getting overwritten by .intel-common-test
inheriting FDO_CI_CONCURRENT: 6 from .lava-test, so change the order of
these definitions to fix that.
This change unfortunantely means that GPU_VERSION has to be overwritten
in some cases.
Additionally, drop redundant .anv-test where .anv-angle-test is used.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33671>
Disable auto-retry for .intel-manual-rules to prevent unnecessary reruns
and switch ANGLE jobs from this rule to .anv-manual-rules, as there’s no
point in running anv-on-angle jobs on iris changes.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33513>
One of the DUTs had to be retired in LAVA a while ago, and the pending
times were high on the dashboard. Decrease the parallelism and increase
the fractions to address this.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
There are only 4 DUTs available in LAVA, and their pending durations
were reaching 3–4 minutes. To address this, reduce the parallelism
for iris-glk-deqp and adjust the fractions to maintain the 10-minute
time limit.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
The 6.11 kernel we were using frequently caused panics and hangs,
particularly in full nightly jobs, making it unreliable.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33279>
LLVM 15 is pretty old, and notably not supported by either ANGLE nor
Skia anymore. So let's move up to LLVM 19 using packages provided by
LLVM themselves, apart from PPC and ARMv7 which don't have builds.
The Skia build now requires a bunch of new warning exclusions; hopefully
most of these are no longer needed when we can upgrade Skia shortly.
The ci-deb-repo revision has also been bumped to get us a new version of
xtensor which builds with LLVM 19, and a version of spirv-tools which
also works with LLVM 19.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Closes: mesa/mesa#11538
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33137>
dEQP-VK.api.device_init.create_instance_device_intentional_alloc_fail.basic
is problematic on TGL as well, so move it to the common anv-skips.txt.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32817>
* GLES3.x is only valid for x <= 2
* The expected error is GLXBadProfileARB, not BadValue
cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33036>
Update expectation files for the test
runs with kernel 6.13-rc4.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <None>
Reviewed-by: Sergi Blanch Torné <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32788>
Move to 6.13-rc4 for all mesa-ci jobs except anv-jsl.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <None>
Reviewed-by: Sergi Blanch Torné <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32788>
The CI_JOB_TIMEOUT variable is the GitLab-defined job timeout in
seconds.
Use this variable in LAVA instead of the separate JOB_TIMEOUT,
which was intended to represent the test phase timeout (job timeout
minus 5 minutes), but was often overlooked.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32609>
Remove bogus failures caused by wrong GPU_VERSION configuration,
delete tests that no longer exist in current CTS versions, and
update expectations.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32681>
Thanks to the speedup achieved by increasing tests_per_group,
nightly jobs are now within reasonable time limits, allowing them
to be re-enabled.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32681>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group for all subsets of the
deqp-runner suites, which allows decreasing the fractions.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32681>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group for all subsets of the
deqp-runner suites, which allows decreasing the fractions.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32681>
Due to the slow startup time of deqp-vk, the previous default of
500 tests per group caused the jobs to run up to twice as slowly
compared to using a higher number of tests per group.
Increase the number of tests per group for all subsets of the
deqp-runner suites, which allows decreasing the fractions.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32681>
The current python-test job creates and compresses python related
artifacts for use by future jobs. The artifacts are currently named
`mesa-python-test` which is somewhat misleading because they are not
needed for testing python scripts or libraries.
Rename the artifacts generated by the python-test job to be more
descriptive of their purpose.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32340>
Only single g33 as part of r300 ci-tron-based farm.
Signed-off-by: Pavel Ondračka <pavel.ondracka@gmail.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32376>
Only consider R32 image formats as supporting atomics because we only
expose VK_FORMAT_FEATURE_2_STORAGE_IMAGE_ATOMIC_BIT for those formats.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32192>
The specification doesn't say which error should be reported, but
piglit expects BadMatch:
/* The GLX_ARB_create_context_robustness spec does not say what error
* code should be generated. However, similar cases (e.g., valid GL
* versions) specify BadMatch. This is also the behavior of NVIDIA's
* closed-source driver.
*/
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32281>
We are expericing some difficulties with the LAVA IP addressing for puff
DUTs atm, blocking the SSH session to happen smoothly.
So, let's force the UART only communication to bypass this issue until
it is solved.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32163>
