Mesa has a shader compiler struct flagging whether GLSL IR's opt_algebraic
and other passes should try and generate certain types of opcodes or
patterns. Extend that to NIR by defining our own struct, which is
automatically generated from the Mesa struct in glsl_to_nir and provided
directly by the driver in TGSI-to-NIR.
v2: Split out the previous two prep patches.
v3: Rebase to master (no TGSI->NIR present)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2)
This will be used to give the optimization passes a chance to customize
behavior for the particular target device.
v2: Rebase to master (no TGSI->NIR present)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Printing instructions doesn't modify them, so we can mark the parameter
const.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Add better comments
- Use nir_ssa_dest_init and nir_src_for_ssa more places
- Fix some void * casts
v3 Jason Ekstrand <jason.ekstrand@intel.com>:
- Rework the way we determine whether or not to sccalarize a phi node to
make the recursion non-bogus
- Treat load_const instructions as scalarizable
v4 Jason Ekstrand <jason.ekstrand@intel.com>:
- Allow uniform and input loads to be scalarizable
v5 Jason Ekstrand <jason.ekstrand@intel.com>:
- Also consider loads of inputs (varying, uniform, or ubo) to be
scalarizable. We were already doing this for load_var on uniforms and
inputs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Unlike with non-SSA ALU instructions, where if they're per-component
you have to look at the writemask to know which source channels are
being used, SSA ALU instructions always have all the possible channels
enabled so we can just look at the number of components in the SSA
definition for per-component instructions to say how many source
components are being used.
v2: use new name nir_ssa_alu_instr_src_components()
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
This avoids the overhead of copying structures and better matches the newly
added nir_alu_src_copy and nir_alu_dest_copy.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Before, we used a system where a file, nir_opcodes.h, defined some macros that
were included to generate the enum values and the nir_op_infos structure. This
worked pretty well, but for development the error messages were never very
useful, Python tools couldn't understand the opcode list, and it was difficult
to use nir_opcodes.h to do other things like autogenerate a builder API. Now, we
store opcode information in nir_opcodes.py, and we have nir_opcodes_c.py to
generate the old nir_opcodes.c and nir_opcodes_h.py to generate nir_opcodes.h,
which contains all the enum names and gets included into nir.h like before. In
addition to solving the above problems, using Python and Mako to generate
everything means that it's much easier to add keep information centralized as we
add new things like constant propagation that require per-opcode information.
v2:
- make Opcode derive from object (Dylan)
- don't use assert like it's a function (Dylan)
- style fixes for fnoise, use xrange (Dylan)
- use iterkeys() in nir_opcodes_h.py (Dylan)
- use pydoc-style comments (Jason)
- don't make fmin/fmax commutative and associative yet (Jason)
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
v3 Jason Ekstrand <jason.ekstrand@intel.com>
- Alphabetize source file lists
- Generate nir_opcodes.h in the builddir instead of the source dir
- Include $(builddir)/src/glsl/nir in the i965 build
- Rework nir_opcodes.h generation so it generates a complete header file
instead of one that has to be embedded inside an enum declaration
It's nice to have this present in your default cases so you can see what
instruction is triggering an abort.
v2: Just pass a NULL state, now that it won't crash when you do.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This is the equivalent of brw_fs_channel_expressions.cpp, which I wanted
for vc4.
v2: Use the nir_src_for_ssa() helper, and another instance of
nir_alu_src_copy().
v3: Drop the non-SSA support. All intended callers will have SSA-only ALU
ops.
v4: Use insert_before, drop stale bcsel/fcsel comment, drop now-unused
unsupported() function, drop lower_context struct.
v5: Completely rename the pass to nir_lower_alu_to_scalar(), add an assert
about weird input_sizes[].
Reviewed-by: Jason Ekstrand <jason.ekstrand@iastate.edu>
There aren't many users yet, but I wanted to do this from my scalarizing
pass.
v2: Constify the src arguments.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Almost all instructions we nir_ssa_def_init() for are nir_dests, and you
have to keep from forgetting to set is_ssa when you do. Just provide the
simpler helper, instead.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The original name wasn't particularly descriptive. This one indicates that
it actually gives you SSA values as opposed to the old pass which lowered
variables to registers.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This solves a number of problems. First is the ability to change the
number of sources that a texture instruction has. Second, it solves the
delema that may occur if a texture instruction has more than 4 sources.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This should be much better for debugging as GDB will pick up on the fact
that it's an enum and actually tell you what you're looking at instead of
giving you some arbitrary hex value you have to go look up.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This should make debugging a lot easier as GDB handles static inlines much
better than macros. Also, static inlines are typesafe.
Reviewed-By: Glenn Kennard <glenn.kennard@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This was a left-over relic of GLSL IR that we aren't using for anything.
If we ever want that value again, we can add it back, but NIR constant
folding should be just as good as GLSL IR's if not better pretty soon, so
I'm not worried about it.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
parallel_copy_copy was a silly name. Also, things were getting long and
annoying, so I added a foreach macro. For historical reasons, several of
the original iterations over parallel copy entries in from_ssa used the
_safe variants of the loop. However, all of these no longer ever remove an
entry so it's ok to make them all use the normal iterator.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Previously, we were doing a lazy creation of the parallel copy
instructions. This is confusing, hard to get right, and involves some
extra state tracking of the copies. This commit adds an extra walk over
the basic blocks to add the block-end parallel copies up front. This
should be much less confusing and, consequently, easier to get right. This
commit also adds more comments about parallel copies to help explain what
all is going on.
As a consequence of these changes, we can now remove the at_end parameter
from nir_parallel_copy_instr.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Originally, this field was intended for determining if the given
instruction acted per-component or if it had mismatching source and
destination sizes that would have to be interpreted specially. However, we
can easily derive this from output_size == 0, so it's not really that
useful. Also, the values we were setting in nir_opcodes.h for this field
were completely bogus and it was never used.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This commit adds some algebraic properties to the metadata of each opcode
in NIR. In particular, you now know, just from the metadata, if a given
opcode is commutative or associative. This will be useful for algebraic
transformation passes that want to be able to match a + b as well as b + a
in one go.
v2: Make algebraic properties all caps. This was more consistent with the
intrinsics flags and seems better for flags in general.
Also, the enums are now declared with (1 << n) rather then hex values.
v3: fmin and fmax technically aren't commutative or associative. Things
get funny when one of the arguments is a NaN.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
As it was, we weren't ever using load_const in a non-SSA way. This allows
us to substantially simplify the load_const instruction. If we ever need a
non-SSA constant load, we can do a load_const and an imov.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
There are some functions whose destinations are SSA-only and so aren't a
nir_dest. This provides a function that is capable of iterating over the
SSA definitions defined by those functions. If you want registers, you
should use the old iterator.
v2: Kenneth Graunke <kenneth@whitecape.org>:
- Fix nir_foreach_ssa_def's return value.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
We stopped generating predicates in glsl_to_nir some time ago. Right now,
it's all dead untested code that I'm not convinced always worked in the
first place. If we decide we want them back, we can revert this patch.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
nir_metadata_dirty was a terrible name because the parameter it takes is
the metadata to be preserved. This is really confusing because it looks
like it's doing the opposite of what it is actually doing. Now it's named
sensibly.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
In particular, we rename nir_tex_src_sampler_index to _sampler_offset and
add a sampler_array_size field to nir_tex_instr. This way we can pass the
size of sampler arrays through to backends even after removing the variable
information and, with it, the type.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This commit renames nir_instr_as_texture to nir_instr_as_tex and renames
nir_instr_type_texture to nir_instr_type_tex to be consistent with
nir_tex_instr.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This pass uses the previously built algebraic transformations framework and
should act as an example for anyone else wanting to make an algebraic
transformation pass for NIR.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Previously, the casting operations were macros. While this is usually
fine, the casting macro used the input parameter twice leading to strange
behavior when you passed the result of another function into it. Since we
know the source and destination types explicitly, we don't loose anything
by making it a function.
Also, this gives us a nice little macro for creating cast function that
will hopefully prevent mistyping.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
We used to have the number of components built into the intrinsic. This
meant that all of our load/store intrinsics had vec1, vec2, vec3, and vec4
variants. This lead to piles of switch statements to generate the correct
intrinsic names, and introspection to figure out the number of components.
We can make things much nicer by allowing "vectorized" intrinsics.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This pass analizes all of the load/store operations and, when a variable is
never aliased (potentially used by an indirect operation), it is lowered
directly to an SSA value. This pass translates to SSA directly and does
not require any fixup by the original to-SSA pass.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
