It's meaningful for this intrinsic and so does not add noise to the
lowering pass.
(Although dual-source writes must be to RT 0, depth and stencil
writes, which store_combined_output_pan is also used for, can still be
done with MRT enabled.)
Fixes: 5c168f09eb ("nir: Eliminate store_combined_output_pan BASE")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16685>
This should make it clear whether a validation failure happens in RADV or
zink.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12448>
If a user wants to skip printing the shader if no changes were made
without declaring a dummy variable for the progress.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12448>
Some older drivers don't support GLSL versions with the concept of flat
varyings and also don't support integers. Here we add a new setting to
make sure we don't use the optimisation that sets varyings to flat.
This setting helps us avoid marking varyings as flat and therefore
potentially having them changed to ints via varying packing.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6500
Fixes: 7647023f3b ("glsl: enable the use of the nir based varying linker")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16573>
Some drivers don't support these indirects and therefore require
loop unrolling if a shader uses a loop induction variable to
access a sampler array.
Here we add a new nir shader compiler option that drivers can set,
this will be the equivalent of the EmitNoIndirectSampler setting
used in the GLSL IR unrolling pass.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16543>
v2: Don't lower ffloor@64 to ffract@64 when both ops are
to be lowered. Settle on ffloor in opt_algebraic because
in can be lowered to other ops in lower_double_ops.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>(v1)
Jason Ekstrand <jason.ekstrand@collabora.com> (v1)
Reviewed-by: Emma Anholt <emma@anholt.net> (v1)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16431>
These varyings cannot be packed by the GLSL linkers packing pass
so we need to skip this lowering until later when we can properly
handle them.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15731>
Unlike spirv glsl varyings might not have explicit locations set.
nir_shader_gather_info() was once only called at the end of linking
but these days it even gets called in NIR optimisation loops via
nir_opt_phi_precision.
In the following patches we implement a NIR version of the GLSL
varying linker which means we will have varyings with no location
set when nir_shader_gather_info() gets called the first few times,
and temp values set only for the purpose of removing unmatched
varyings between shaders for some calls after that.
Here rather than asserting we simply abort the io info gathering,
when we hit these values.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15731>
This version takes a set of variables and totally lowers indirects on
any variable in the set. We also rewrite the builtin_uniform version to
use the new helper internally.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16482>
Remove the conditional break statements associated with all
terminators that are associated with a fixed iteration count,
except for the one associated with the limiting terminator.
This logic matches similiar functionality that exists in the
old GLSL IR unrolling code.
This change helps a piglit test pass on the r300 driver once
we switch off the old GLSL IR unrolling code.
Shader-db results IRIS (BDW):
total instructions in shared programs: 17538619 -> 17538595 (<.01%)
instructions in affected programs: 216 -> 192 (-11.11%)
helped: 3
HURT: 0
helped stats (abs) min: 7 max: 10 x̄: 8.00 x̃: 7
helped stats (rel) min: 10.00% max: 12.07% x̄: 11.38% x̃: 12.07%
total cycles in shared programs: 858674910 -> 858672810 (<.01%)
cycles in affected programs: 79540 -> 77440 (-2.64%)
helped: 3
HURT: 0
helped stats (abs) min: 620 max: 800 x̄: 700.00 x̃: 680
helped stats (rel) min: 2.45% max: 2.83% x̄: 2.63% x̃: 2.62%
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16399>
Previously we only cared if this was set for the limiting
terminator. However in the following patch we will make use of this
information on other terminators to decide if we can eliminate them.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16399>
Task shaders store their output payload to VRAM where mesh
shaders read from. There are two ring buffers:
1. Draw ring: this is where mesh dispatch sizes and
the ready bit are stored.
2. Payload ring: this is where the optional payload
is stored (up to 16K per task workgroup).
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14929>
Otherwise, it would mutate `fneg(fadd(-0, 0))` into `fadd(0, -0)` which
isn't correct since -0 + (+0) = +0 + (-0) = +0.
This fixes the OpenCL contraction tests on Iris.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16041>
This pattern pops up a bunch and the semantics of nir_channels() aren't
very convenient much of the time. Let's add a nir_trim_vector() which
matches nir_pad_vector().
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16309>
Because we pull the RT from the variable location and use that to look
up formats, we need a constant RT index. To deal with arrays (possibly
of arrays), we would either need to handle array derefs (we don't today)
or we need to require the variables to be split into one variable per
RT. Given that we have to lower indirect derefs anyway (to get constant
indices), we may as well require the client to split output variables by
calling nir_lower_io_arrays_to_elements_no_indirect().
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16309>
The comment above is correct, but the code to calculate the mask was broken.
No Foz-db changes outside of noise.
Fixes: 0e6581b87d ("nir/algebraic: Reassociate shift-by-constant of shift-by-constant")
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15990>
This code just got duplicated a lot. There is still more, but the
remaining instances do a bit more than just removing other functions.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16348>
When moving code into the main block or loop blocks, put the code into
its own :
if(true) { ... }
block so that we avoid break/continue/return issues.
v2: Also take care of the main block with return instructions
v3: Make deletion more obvious with dummy if blocks (Jason)
v4: Fixup assert for loops (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8dfb240b1f ("nir: Add raytracing shader call lowering pass.")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16036>
When moving code from below to the insertion cursor point, if the
cursor points to a jump instruction, don't bother inserting the code.
It would break the break/continue assumptions of NIR and would not be
executed anyway.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8dfb240b1f ("nir: Add raytracing shader call lowering pass.")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16036>
Stop using nop instructions which are causing issues with
break/continue, instead use a nir_cursor (which brings its share of
pain).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8dfb240b1f ("nir: Add raytracing shader call lowering pass.")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16036>
This will be useful to cut code from one location and paste it at
another place and later keep pasting after the previous insertions.
v2: update comment (Jason)
deal with stiching 2 empty blocks (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16036>
That's a read, not a write. Fixes optimizations getting disabled for fragment
shaders when linked with a shader producing transform feedback varyings.
Fixes: 85a723975b ("nir: add and gather shader_info::writes_memory")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16285>
Avoids nir validation assertion failures, and it's not like backend
drivers would want to see definitely-out-of-bounds read/writes either.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16066>
