The messages for those 16-bit operations still use 32-bit sources and
destinations, so expand them accordingly when building the payload.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8750>
This allows us to do bounds checked A64 block load without the it being
counted as control-flow by NIR. This means that NIR optimizations like
CSE will be able to work on these the same as a regular load.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8635>
We currently don't use push constants with the COMPUTE_WALKER command.
Make all uniforms to be pull constants.
The local group id previously was a push constant, but is now
available in R0.2[7:0].
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8342>
Instead of making it a fragment-specific thing based on uses_kill, track
whether or not we need one in fs_visitor and emit HALT_TARGET at the end
of emit_nir_code() if needed.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5071>
We're about to start using it to implement nir_jump_halt which has
nothing inherently to do with fragment shaders or discards. May as well
name it for the HW instruction it generates.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5071>
The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
In our source languages, interpolateAtOffset() takes a floating point
offset in the range [-0.5, +0.5]. However, the hardware takes integer
valued offsets in the range [-8, 7], in units of 1/16th of a pixel.
So, we need to multiply and clamp the coordinates. We were doing this
in the FS backend, but with the advent of IBC, I'd like to avoid doing
it twice. This patch instead moves the lowering to NIR so we can reuse
it across both backends.
v2: Use nir_shader_instructions_pass (suggested by Eric Anholt).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6193>
Intel hardware supports 8-bit arithmetic but it's tricky and annoying:
- Byte operations don't actually execute with a byte type. The
execution type for byte operations is actually word. (I don't know
if this has implications for the HW implementation. Probably?)
- Destinations are required to be strided out to at least the
execution type size. This means that B-type operations always have
a stride of at least 2. This means wreaks havoc on the back-end in
multiple ways.
- Thanks to the strided destination, we don't actually save register
space by storing things in bytes. We could, in theory, interleave
two byte values into a single 2B-strided register but that's both a
pain for RA and would lead to piles of false dependencies pre-Gen12
and on Gen12+, we'd need some significant improvements to the SWSB
pass.
- Also thanks to the strided destination, all byte writes are treated
as partial writes by the back-end and we don't know how to copy-prop
them.
- On Gen11, they added a new hardware restriction that byte types
aren't allowed in the 2nd and 3rd sources of instructions. This
means that we have to emit B->W conversions all over to resolve
things. If we emit said conversions in NIR, instead, there's a
chance NIR can get rid of some of them for us.
We can get rid of a lot of this pain by just asking NIR to get rid of
8-bit arithmetic for us. It may lead to a few more conversions in some
cases but having back-end copy-prop actually work is probably a bigger
bonus. There is still a bit we have to handle in the back-end. In
particular, basic MOVs and conversions because 8-bit load/store ops
still require 8-bit types.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7482>
We can't really support these directly on any platform. May as well let
NIR lower them. The NIR lowering is potentially one more instruction
for scan/reduce ops thanks to not being able to do the B->W conversion
as part of SEL_EXEC. For imax/imin exclusive scan, it's yet another
instruction thanks to the extra imax/imin NIR has to insert to deal with
the fact that the first live channel will contain the identity value
which, when signed, will cast wrong. However, it does let us drop some
complexity from our back-end so it's probably worth it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7482>
For terminate operation, jump the invocation without predicating on
the rest of the quad being disabled -- which is what is done for
demote and discard.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7150>
Add an option to nir_lower_gs_intrinsics which tells it to track
the number of emitted primitives, not just vertices. Additionally,
also make it per-stream.
Also rename the set_vertex_count intrinsic to
set_vertex_and_primitive_count.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6964>
Scratch stores are being lowered to the instructions with side-effects,
however they should be enabled in fs helper invocations, since they
are produced from operations which don't imply side-effects.
To fix this - we move the decision of whether the sample mask predication
is enable to the point where logical brw instructions are created.
GLSL example of the issue:
int tmp[1024];
...
do {
// changes to tmp
} while (some_condition(tmp))
If `tmp` is lowered to scrach memory, `some_condition` would be
undefined if scratch write is predicated on sample mask, making
possible for the while loop to become infinite and hang the GPU.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3256
Fixes: 53bfcdeecf
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6056>
This makes it explicit that this intrinsic is only for SSBOs. For the
v3dv driver, we'll be adding a get_ubo_size intrinsic and we want to be
able to distinguish between the two.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6812>
Coverity complains about possible out-of-bounds write & read, because
it thinks that "loc + i" can be bigger than sizes of the 2 used arrays.
It's not obvious from the code it cannot happen, so add asserts here.
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6667>
There's no good reason to split this into three. Sure, CS indirects are
only guaranteed by the spec to be DWORD aligned, but that's all untyped
surface reads require anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6570>
It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
The OpenCL image_width/height/depth functions have variants which can
take an LOD parameter. More importantly, LLVM-SPIRV-Translator always
generates OpImageQuerySizeLod even if the LOD is guaranteed to be zero.
Given that over half the hardware out there has an LOD field for image
size queries (based on a rudimentary scan through their NIR -> whatever
code), we may as well just add the source to the NIR intrinsic. If this
is ever a problem for anyone, the lowering is pretty trivial.
I've also added asserts to everyone's drivers that should alert them if
they ever see an LOD other than zero. This will never happen with GL or
Vulkan so there's no need for panic.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6396>
Just to clarify the missing break is intentional.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5365>
SPIRV OpControlBarrier can have both a memory and a control barrier
which some hardware can handle with a single instruction. Let's
turn the scoped_memory_barrier into a scoped barrier which can embed
both barrier types. Note that control-only or memory-only barriers can
be supported through this new intrinsic by passing NIR_SCOPE_NONE to the
unused barrier type.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
Using HALT to immediately jump to the end of the shader is required to
implement GL_EXT_gpu_shader4 and OpenGL 3.0. However, vanilla OpenGL
1.2 doesn't forbid it and it likely makes something somewhere faster.
We should be consistent and implement the same discard behavior on all
hardware if we can.
The rules for HALT on Gen4-5 are a bit different from Gen6+. On the
older hardware, there is no stack for HALT; instead it's up to software
to save and restore mask registers. However, there's no real saving
needed since we only use HALT to jump to the end of the program where
we're about about to do our FB writes. All we need to do is reset AMask
to DMask, the value it was initialized to at the start of the thread.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5244>
The nir_intrinsic_load_simd_width_intel is always lowered by the
brw_nir_lower_simd() pass before the emission happens. This is likely
a "leftover" from patch rewriting/squashing that happened when this
intrinsic was added.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5213>
Intrinsic to get the SIMD width, which not always the same as subgroup
size. Starting with a small scope (Intel), but we can rename it later
to generalize if this turns out useful for other drivers.
Change brw_nir_lower_cs_intrinsics() to use this intrinsic instead of
a width will be passed as argument. The pass also used to optimized
load_subgroup_id for the case that the workgroup fitted into a single
thread (it will be constant zero). This optimization moved together
with lowering of the SIMD.
This is a preparation for letting the drivers call it before the
brw_compile_cs() step.
No shader-db changes in BDW, SKL, ICL and TGL.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4794>
Adding this since Iris will handle variable group size parameters by
itself.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4794>
Render Target Array Index has moved from R0.0[26:16] to
R1.1[26:16] on gen12.
Fixes dEQP-VK.multiview.input_attachments.*
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4836>
In Gen11+, when emitting a fence for both L3 and SLM, the generated
code would look like
SEND, MOV (for stall), SEND, MOV (for stall)
This commit change that so two SENDs are emitted before the MOVs for
stall. This is similar to the approach used in Ivy Bridge for the
render fence.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3278>
