These jobs need to run in pre-merge, so let's make sure their execution
time remains in check so as not to block merges due to non-merge
pipelines.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33486>
Deqp randomly dies at the beginning of VKCTS, which fails most
pipelines.
Reducing the job concurrency fixes the issue, so let's roll with that
until I go buy more RAM for this machine.
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33486>
Now that we have a more powerful host, we started getting new flakes.
Let's document them!
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Eric Engestrom <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33446>
The radv-stoney-angle-full was unintentionally inheriting the fraction
from the pre-merge job.
Also use the correct manual rules definition while we're here, and use
consistent naming for the restricted rules.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Reviewed-by: Eric Engestrom <None>
Reviewed-by: Antonio Ospite <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33377>
There's been a high number of GPU resets on Raven that amdgpu couldn't
recover from, leading to jobs timing out.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33317>
We have more hp-x360-14a-cb0001xx-zork DUTs available in LAVA,
use it to offload the overloaded lenovo-TPad-C13-Yoga-zork.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33082>
The CI job runs each supported decoder on 1 LAVA job:
- vp9
- h.264
- h.265
They each run the gstreamer VAAPI fluster decoder tests on a radeonsi
device on LAVA.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Co-authored-by: Sergi Blanch Torne <sergi@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26113>
Requests with no reply will report errors by default to the event
loop, which then usually cause the not very useful log like this
to be printed:
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 149 ()
Minor opcode of failed request: 2
Serial number of failed request: 33
Current serial number in output stream: 34
This commit introduce some helpers to handle the xcb errors in Mesa,
and be able to report errors properly.
For instance the same error will now log:
MESA: error: dri3_alloc_render_buffer:1634 xcb_dri3_pixmap_from_buffer[s] failed
MESA: error: X error: 11
It's not fixing the underlying issue, but at least now tests like
"glx-visuals-stencil -pixmap" and "glx-visuals-depth pixmap" fail
properly.
cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33036>
* GLES3.x is only valid for x <= 2
* The expected error is GLXBadProfileARB, not BadValue
cc: mesa-stable
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33036>
Update expectation files for the test
runs with kernel 6.13-rc4.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: David Heidelberg <None>
Reviewed-by: Sergi Blanch Torné <None>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32788>
This is similar to what link_intrastage_shaders is doing and it
fixes the following test:
KHR-Single-GL46.subgroups.builtin_var.compute.subgroupsize_compute
Which was failing with SPIRV but passing with GLSL, the diff being:
- SPIRV: "subgroup_size: 1"
- GLSL: "subgroup_size: 2"
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32698>
The blitter VS expects coords to fit in a signed int16. When this
is not the case, use util_blitter_draw_rectangle instead.
Since util_blitter_draw_rectangle sets vertex elements, we need
to make sure they're properly restored.
The alternative to this fallback would be to pass coordinates
unpacked (so 4 SGPRs instead of 2), but this doesn't fix the
fbo-blit-check-limits test because of uv interpolation precision
issue.
Using 2 triangles instead of a rectangle + disabling
window_space_position helps but then this breaks some GLES3 tests,
like dEQP-GLES3.functional.fbo.blit.rect.nearest_consistency_mag_reverse_src_x
(which doesn't pass either if u_blitter is used for all cases).
Using a single triangle covering the whole rectangles fixes all
cases but it then requires to setup scissors to not write too
much pixels...
So, instead of adding so much complexity, let's use u_blitter
for the "large coordinates" fallback, and keep the rectangle blit
for the other cases.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32698>
Now that ACO has become the default on pre-RDNA GPUs, all pre-merge CI
coverage of radeonsi+LLVM has disapeared. Let's fix this by making
our post-merge glcts-vangogh-valve job run inpre-merge pipelines.
However, we are limited in vangogh capacity, so rather than running the
full glcts/piglit test suites we run a fraction of it to stay under 15
minutes of execution time on a single Steam Deck.
Suggested-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32865>
The CI_JOB_TIMEOUT variable is the GitLab-defined job timeout in
seconds.
Use this variable in LAVA instead of the separate JOB_TIMEOUT,
which was intended to represent the test phase timeout (job timeout
minus 5 minutes), but was often overlooked.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32609>
This job was taking longer than 10 minutes, so increase the
fraction of the quick_shader piglit profile to get the runtime
within acceptable limits.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32455>
Converting to deqp-runner suite allows merging the two jobs running
the two piglit profiles for more even distribution and granular
control of runtime.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32455>
This contains many more tests for Vulkan 1.4, but the Vulkan loader
probably needs an update too.
This should only affect RADV which is the only user for VKCTS main.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32475>
