This has the benefit of replacing some explicit asserts with static type
checking.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23313>
This commit adds handling for {s,z}loaden and {s,z}storeen to
control loading from and storing to the stencil and depth buffer.
This commit also addressed the FIXMEs around barrier_{load,store}
which control the {s,z}{load,store}en.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20487>
This allows sub_cmd->job.run_frag to be setup before calling
pvr_sub_cmd_gfx_requires_split_submit().
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reported-by: James Glanville <james.glanville@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23125>
Deferred pvr_transfer_cmd instances are allocated from a dyn_array on
the owning pvr_cmd_buffer and must not be freed directly.
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Reported-by: James Glanville <james.glanville@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23125>
If the command buffer already had an error while recording, on
vkEndCommandBuffer() the command buffer wasn't being transitioned
to the invalid state.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23069>
Some code still used our custom `status` field within the command
buffer. This could lead to unreliable error handling since we're
using the common vk_command_buffer handling.
This commit removes the field and changes the error paths to use
the common code instead.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23069>
VDMCTRL_INDEX_LIST3 is packed conditionally which can cause the
generation of a corrupted control stream as the function mandated
the provided buffer to be of a fixed size always including the
possibly unpacked word. This would leave a gap in the control
stream when the caller ends up copying the buffer into the control
stream.
Reported-by: James Glanville <james.glanville@imgtec.com>
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22918>
For indirect draw commands the data segment's address was being
calculated with an unaligned code size which could potentially
send an unaligned address to the hw causing problems.
Reported-by: James Glanville <james.glanville@imgtec.com>
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22746>
We use dwords (32 bit) quite a bit around the code base. Previously
we used '* 4', '<< 2', or '* sizeof(uint32_t)' to go from dwords to
bytes. The conversion isn't always clear when other operations
happen in the same line, which can leave one wondering where the
multiplication came from.
PVR_DW_TO_BYTES() should make the code more obvious as well as
making the conversion more consistent.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22658>
The robustness buffer is used when no vertex attribute can be loaded and
robustBufferAccess is enabled.
Signed-off-by: Jarred Davies <jarred.davies@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21579>
depth_stencil_attachment has been changed from a pointer to the attachment idx
to just the attachment idx, as this avoids the driver having to check for NULL
when comparing attachments indexes with depth_stencil_attachment.
Anyplace that relies on depth_stencil_attachment being a valid index must
already check that depth_stencil_attachment is not VK_ATTACHMENT_UNUSED, so
this change avoids having to check both the pointer and the index for the same
information.
Noticed when running dEQP-VK.api.smoke.triangle
Signed-off-by: Jarred Davies <jarred.davies@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21690>
Do this by removing the compatibility table and only using hard coded shaders
when present. The hard coded shaders, along with the hard coding framework
itself, can be dropped once the compiler is capable of compiling the hard coded
shaders. In the meantime we don't want to risk regressing things that we know
work because we temporarily can't test them.
This restriction is being dropped now as the new compiler framework has been
merged and we want to make use of it so it can be developed further.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21495>
On entering SPM we need to store the tile data for the current
render into the scratch buffer so we need to setup an EOT program
to do so.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21386>
This is based on the new approach of having a descriptor set
addresses table in memory. To handle dynamic offsets provided on
vkCmdBindDescriptorSets() we duplicate the set with dynamic
descriptors, apply the offsets, and write the new bo's address
into the table. There are better ways of handling dynamic
descriptors but this implementation won't require many/if any
changes in the compiler code.
The descriptor set itself doesn't allocate and reserve space for
the dynamic descriptors since they would all be collected together
when creating the pipeline layout. While copying the descriptor
set we allocate extra space at the end for the dynamic primaries
and secondaries to account for that.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21391>
For pvr_setup_descriptor_mappings_new() there will be quite a few
variables of which the value depend on the stage so rather than
having all that selection in the `switch` at the beginning of the
function the helper macro provides a compact selection in the
desired scope.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21331>
Previously UBOs and various buffers, as well as the native
descriptor sets were DMAed into the shared registers. This added
complexity in allocating the registers and various other places.
We also ended up being in situations were we wouldn't know the size
of a buffer by the time the shaders were being compiled. It would
be possible to determine the size by inspecting the shader but
that would introduce more complexity in the compiler.
To get things working sooner, avoid extra complexity for
now, a different approach was devised.
The driver will write the addresses of the currently bound
descriptor sets into a device buffer. The device buffer is referred
to as the descriptor set addrs table. The dev addr of the table is
written into a shared register. To access the buffers the shader
will first get the address of the descriptor set from the in memory
table. Then get the primary descriptor from the descriptor set. And
finally access the in memory buffer with the address it read from
the descriptor. Essentially there's three level of indirection and
all the buffers are in memory. The shader will know what offset the
primary descriptor is located based on the descriptor set layout.
The descriptor set address could have been written into the shareds
directly but that would require extra handling on the compiler side
so opted to just write the table address instead.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21331>
This commit sets up the infrastructure to introduce the new
descriptor set approach while keeping the old paths so the
hard coded apps are still operational. The old paths will be
removed once the compiler can compiler shaders for those apps
and the driver-compiler interface is fully flushed out.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21331>
This commit removes the PVR_STATIC_CLEAR_.*_BIT used to index the
static clear templates in the device. Now we use the Vulkan flags
so no need for any conversion of the flags.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20055>
