Adding compile time check for subroutine functions with
the same names. Similar check for intrastage linking was already
landed in commit 5f0567a4f6.
From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Also there is no "OpenGL ES Shading Language 4.00" spec,
so change it to GLSL 4.00 spec.
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Extend the pass to propagate the copies information along the control
flow graph. It performs two walks, first it collects the vars
that were written inside each node. Then it walks applying the copy
propagation using a list of copies previously available. At each node
the list is invalidated according to results from the first walk.
This approach is simpler than a full data-flow analysis, but covers
various cases. If derefs are used for operating on more memory
resources (e.g. SSBOs), the difference from a regular pass is expected
to be more visible -- as the SSA copy propagation pass won't apply to
those.
A full data-flow analysis would handle more scenarios: conditional
breaks in the control flow and merge equivalent effects from multiple
branches (e.g. using a phi node to merge the source for writes to the
same deref). However, as previous commentary in the code stated, its
complexity 'rapidly get out of hand'. The current patch is a good
intermediate step towards more complex analysis.
The 'copies' linked list was modified to use util_dynarray to make it
more convenient to clone it (to handle ifs/loops).
Annotated shader-db results for Skylake:
total instructions in shared programs: 15105796 -> 15105451 (<.01%)
instructions in affected programs: 152293 -> 151948 (-0.23%)
helped: 96
HURT: 17
All the HURTs and many HELPs are one instruction. Looking
at pass by pass outputs, the copy prop kicks in removing a
bunch of loads correctly, which ends up altering what other
other optimizations kick. In those cases the copies would be
propagated after lowering to SSA.
In few HELPs we are actually helping doing more than was
possible previously, e.g. consolidating load_uniforms from
different blocks. Most of those are from
shaders/dolphin/ubershaders/.
total cycles in shared programs: 566048861 -> 565954876 (-0.02%)
cycles in affected programs: 151461830 -> 151367845 (-0.06%)
helped: 2933
HURT: 2950
A lot of noise on both sides.
total loops in shared programs: 4603 -> 4603 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 11085 -> 11073 (-0.11%)
spills in affected programs: 23 -> 11 (-52.17%)
helped: 1
HURT: 0
The shaders/dolphin/ubershaders/12.shader_test was able to
pull a couple of loads from inside if statements and reuse
them.
total fills in shared programs: 23143 -> 23089 (-0.23%)
fills in affected programs: 2718 -> 2664 (-1.99%)
helped: 27
HURT: 0
All from shaders/dolphin/ubershaders/.
LOST: 0
GAINED: 0
The other generations follow the same overall shape. The spills and
fills HURTs are all from the same game.
shader-db results for Broadwell.
total instructions in shared programs: 15402037 -> 15401841 (<.01%)
instructions in affected programs: 144386 -> 144190 (-0.14%)
helped: 86
HURT: 9
total cycles in shared programs: 600912755 -> 600902486 (<.01%)
cycles in affected programs: 185662820 -> 185652551 (<.01%)
helped: 2598
HURT: 3053
total loops in shared programs: 4579 -> 4579 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 80929 -> 80924 (<.01%)
spills in affected programs: 720 -> 715 (-0.69%)
helped: 1
HURT: 5
total fills in shared programs: 93057 -> 93013 (-0.05%)
fills in affected programs: 3398 -> 3354 (-1.29%)
helped: 27
HURT: 5
LOST: 0
GAINED: 2
shader-db results for Haswell:
total instructions in shared programs: 9231975 -> 9230357 (-0.02%)
instructions in affected programs: 44992 -> 43374 (-3.60%)
helped: 27
HURT: 69
total cycles in shared programs: 87760587 -> 87727502 (-0.04%)
cycles in affected programs: 7720673 -> 7687588 (-0.43%)
helped: 1609
HURT: 1416
total loops in shared programs: 1830 -> 1830 (0.00%)
loops in affected programs: 0 -> 0
helped: 0
HURT: 0
total spills in shared programs: 1988 -> 1692 (-14.89%)
spills in affected programs: 296 -> 0
helped: 1
HURT: 0
total fills in shared programs: 2103 -> 1668 (-20.68%)
fills in affected programs: 438 -> 3 (-99.32%)
helped: 4
HURT: 0
LOST: 0
GAINED: 1
v2: Remove the DISABLE prefix from tests we now pass.
v3: Add comments about missing write_mask handling. (Caio)
Add unreachable when switching on cf_node type. (Jason)
Properly merge the component information in written map
instead of replacing. (Jason)
Explain how removal from written arrays works. (Jason)
Use mode directly from deref instead of getting the var. (Jason)
v4: Register the local written mode for calls. (Jason)
Prefer cf_node instead of node. (Jason)
Clarify that remove inside iteration only works in backward
iterations. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Calls are not used yet (functions are inlined), but since new code is
already taking them into account, do it here too. The convention here
and in other places is that no writable memory is assumed to remain
unchanged, as well as global variables.
Also, explicitly state the modes affected (instead of using the
reverse logic) in one of the apply_for_barrier_modes calls.
Suggested by Jason.
v2: Consider local vars used by a call to be conservative, SPIR-V has
such cases. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Also tests for removal of redundant loads, that we currently handle as
part of the copy propagation.
Note some tests involve multiple blocks and are currently DISABLED
because they (expectedly) fail.
v2: Add missing DISABLED prefix to "multi block" tests. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of doing this as part of the existing copy_prop_vars pass.
Separation makes easier to expand the scope of both passes to be more
than per-block. For copy propagation, the information about valid
copies comes from previous instructions; while the dead write removal
depends on information from later instructions ("have any instruction
used this deref before overwrite it?").
Also change the tests to use this pass (instead of copy prop vars).
Note that the disabled tests continue to fail, since the standalone
pass is still per-block.
v2: Remove entries from dynarray instead of marking items as
deleted. Use foreach_reverse. (Caio)
(all from Jason)
Do not cache nir_deref_path. Not worthy for this patch.
Clear unused writes when hitting a call instruction.
Clean up enumeration of modes for barriers.
Move metadata calls to the inner function.
v3: For copies, use the vector length to calculate the mask.
(all from Jason)
Use nir_component_mask_t when applicable.
Rename functions for clarity.
Consider local vars used by a call to be conservative (SPIR-V has
such cases).
Comment and assert the assumption that stores and copies are
always to a deref that ends with a vector or scalar.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Note at the moment the pass called is nir_opt_copy_prop_vars, because
dead write elimination is implemented there.
Also added tests that involve identifying dead writes in multiple
blocks (e.g. the overwrite happens in another block). Those currently
fail as expected, so are marked to be skipped.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Add basic helpers for doing tests on the vars related optimization
passes. The main goal is to lower the barrier to create tests during
development and debugging of the passes. Full coverage is not a
requirement.
v2: Make find_next_intrinsic() skip blocks before 'after'. (Jason)
Move nir_imm_ivec2() to nir_builder.h. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For gallium drivers where you want to do some linking at variant compile
time, you don't have the other producer/consumer shader on hand to modify.
By exposing the inner function, the driver can have the used varyings in
the compiled shader cache key and still do linking.
This is also useful for V3D, where the binning shader wants to only output
position and TF varyings. We've been removing those after nir_lower_io,
but this will be less driver-specific code and let more of the shader get
DCEed early in NIR.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is needed for nir_gather_info to actually count the new textures,
since it operates solely on variables.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
v2: - change how the access qualifiers are accumulated
v3: - duplicate members in struct_member_decoration_cb()
- handle access qualifiers on variables
- remove access qualifiers handling in _vtn_variable_load_store()
- fix setting access qualifiers on type->array_element
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net
The b2f and b2i conversions always produce zero or one which are both
representable in every type and size. Since b2i and b2f support all bit
sizes, we can just get rid of the conversion opcode.
total instructions in shared programs: 15089335 -> 15084368 (-0.03%)
instructions in affected programs: 212564 -> 207597 (-2.34%)
helped: 896
HURT: 0
total cycles in shared programs: 369831123 -> 369826267 (<.01%)
cycles in affected programs: 2008647 -> 2003791 (-0.24%)
helped: 693
HURT: 216
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The Nvidia/AMD binary drivers allow this, as does GCC.
This fixes shader compilation issues in the latest update of
No Mans Sky.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These allows us to not support fsign.sat in the Intel compiler backend,
and that will simplify some later changes.
No shader-db changes on any Intel platform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
This happens in situations where we might do
vec.wzyx[i] = ...
The swizzle would get effectively ignored because of the interaction
between how ir_assignment->set_lhs works and overwriting the write_mask.
There are two cases, one where i is a constant, and another where i is
variable. We have to be extra-careful in both cases.
Fixes the following WebGL test:
https://www.khronos.org/registry/webgl/sdk/tests/conformance2/glsl3/vector-dynamic-indexing-swizzled-lvalue.html
And the new piglit tests:
swizzled-writemask-indexing-nonconst.shader_test
swizzled-writemask-indexing.shader_test
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Otherwise, they are removed during NIR linking or in some
lowering passes.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The ssa_for_alu_src helper will correctly handle swizzles and other
source modifiers for you. The expansions for unpack_half_2x16,
pack_uvec2_to_uint, and pack_uvec4_to_uint were all broken with regards
to swizzles. The brokenness of unpack_half_2x16 was causing rendering
errors in Rise of the Tomb Raider on Intel ever since c11833ab24
which added an extra copy propagation to the optimization pipeline and
caused us to start seeing swizzles where we hadn't seen any before.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107926
Fixes: 9ce901058f "nir: Add lowering of nir_op_unpack_half_2x16."
Fixes: 9b8786eba9 "nir: Add lowering support for packing opcodes."
Tested-by: Alex Smith <asmith@feralinteractive.com>
Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
>From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
v2:
- error out earlier (Tapani)
- style fixes (Iago)
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
We already call nir_rematerialize_derefs_in_use_blocks_impl prior to
calling nir_lower_ssa_defs_to_regs_block so the assertion that all deref
uses in the block should hold. This fixes the following CTS test when
SPIR-V optimization recipe 1:
dEQP-VK.glsl.struct.local.loop_nested_struct_array_vertex
Fixes: 606eb56ab9 "intel/nir: Only lower load/store derefs"
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
If the block in which the jump is inserted is the predecessor of a phi
then we need to remove phi sources otherwise the phi may end up with
things improperly connected. This fixes the following CTS test when
dEQP is run with SPIR-V optimization recipe 1:
dEQP-VK.glsl.functions.control_flow.return_in_nested_loop_vertex
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
do_assignment validated assigment but when rhs type was not compatible
it proceeded without issues and returned error_emitted = false.
On the other hand process_initializer expected do_assignment to always
return compatible type and never fail.
As a result when variable was initialized with incompatible type
the type of variable changed to the incompatible one.
This manifested in unnecessary error messages and in one case in crash.
Example GLSL:
vec4 tmp = vec2(0.0);
tmp.z -= 1.0;
Past error messages:
initializer of type vec2 cannot be assigned to variable of type vec4
invalid swizzle / mask `z'
type mismatch
operands to arithmetic operators must be numeric
After this patch:
initializer of type vec2 cannot be assigned to variable of type vec4
In the other case when we initialize variable with incompatible struct,
accessing variable's field leaded to a crash. Example:
uniform struct {float field;} data;
...
vec4 tmp = data;
tmp.x -= 1.0;
After the patch there is only error line without a crash:
initializer of type #anon_struct cannot be assigned to variable of
type vec4
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107547
CC: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 82799a5d1b8 ("nir: Add a small pass to rematerialize derefs
per-block")
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
The lcssa and phis_to_regs passes are used by various NIR optimizations
that modify the CFG. Putting a couple of asserts will help ensure that
we don't accidentally put derefs in phis as part of an optimization
pass.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
When we're about to re-arrange a bunch of blocks, it's a good idea to
make sure that we don't have deref uses crossing block boundaries.
Otherwise we may end up with a deref going through a phi and that would
be bad.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
This pass re-materializes deref instructions on a per-block basis to
ensure that every use of a deref occurs in the same block as the
instruction which uses it.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: "18.2" <mesa-stable@lists.freedesktop.org>
In GLSL IR we cheat with switch statements and simply convert them
into loops with a single iteration. This allowed us to make use of
the existing jump instruction handling provided by the loop handing
code, it also allows dead code to be cleaned up once we have
wrapped the code in a loop.
However using loops in this way created previously unrollable loops
which limits further optimisations. Here we provide a way to unroll
loops that end in a break and have multiple other exits.
All shader-db changes are from the dolphin uber shaders. There is a
small amount of HURT shaders but in general the improvements far
exceed the HURT.
shader-db results IVB:
total instructions in shared programs: 10018187 -> 10016468 (-0.02%)
instructions in affected programs: 104080 -> 102361 (-1.65%)
helped: 36
HURT: 15
total cycles in shared programs: 220065064 -> 154529655 (-29.78%)
cycles in affected programs: 126063017 -> 60527608 (-51.99%)
helped: 51
HURT: 0
total loops in shared programs: 2515 -> 2308 (-8.23%)
loops in affected programs: 903 -> 696 (-22.92%)
helped: 51
HURT: 0
total spills in shared programs: 4370 -> 4124 (-5.63%)
spills in affected programs: 1397 -> 1151 (-17.61%)
helped: 9
HURT: 12
total fills in shared programs: 4581 -> 4419 (-3.54%)
fills in affected programs: 2201 -> 2039 (-7.36%)
helped: 9
HURT: 15
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- only allow nir_op_inot or nir_op_b2i when alu input is 1.
- use some helpers as suggested by Jason.
v3:
- evaluate alu op for single input alu ops
- add helper function to decide if to propagate through alu
- make use of nir_before_src in another spot
shader-db IVB results:
total instructions in shared programs: 9993483 -> 9993472 (-0.00%)
instructions in affected programs: 1300 -> 1289 (-0.85%)
helped: 11
HURT: 0
total cycles in shared programs: 219476091 -> 219476059 (-0.00%)
cycles in affected programs: 7675 -> 7643 (-0.42%)
helped: 10
HURT: 1
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since we know what side of the branch we ended up on we can just
replace the use with a constant.
All the spill changes in shader-db are from Dolphin uber shaders,
despite some small regressions the change is clearly positive.
V2: insert new constant after any phis in the
use->parent_instr->type == nir_instr_type_phi path.
v3:
- use nir_after_block_before_jump() for inserting const
- check dominance of phi uses correctly
v4:
- create some helpers as suggested by Jason.
v5 (Jason Ekstrand):
- Use LIST_ENTRY to get the phi src
shader-db results IVB:
total instructions in shared programs: 9999201 -> 9993483 (-0.06%)
instructions in affected programs: 163235 -> 157517 (-3.50%)
helped: 132
HURT: 2
total cycles in shared programs: 231670754 -> 219476091 (-5.26%)
cycles in affected programs: 143424120 -> 131229457 (-8.50%)
helped: 115
HURT: 24
total spills in shared programs: 4383 -> 4370 (-0.30%)
spills in affected programs: 1656 -> 1643 (-0.79%)
helped: 9
HURT: 18
total fills in shared programs: 4610 -> 4581 (-0.63%)
fills in affected programs: 374 -> 345 (-7.75%)
helped: 6
HURT: 0
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From Section 4.6.4 (Invariance and Linkage) of the GLSL ES 1.0 specification
"The invariance of varyings that are declared in both the vertex and
fragment shaders must match. For the built-in special variables,
gl_FragCoord can only be declared invariant if and only if
gl_Position is declared invariant. Similarly gl_PointCoord can only
be declared invariant if and only if gl_PointSize is declared
invariant. It is an error to declare gl_FrontFacing as invariant.
The invariance of gl_FrontFacing is the same as the invariance of
gl_Position."
Fixes:
* glsl-pcoord-invariant.shader_test
* glsl-fcoord-invariant.shader_test
* glsl-fface-invariant.shader_test
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107734
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
and _mesa_bitcount_64 with util_bitcount_64. This fixes a build problem
in nir for platforms that don't have popcount or popcountll, such as
32bit msvc.
v2: - Fix additional uses of _mesa_bitcount added after this was
originally written
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
It was very inconsistently handled; the only things that made use of it
were glsl_to_nir, glspirv, and nir_gather_info. In particular,
nir_lower_io completely ignored it so anyone using nir_lower_io on
64-bit vertex attributes was going to be in for a shock. Also, as of
the previous commit, it's set by every driver that supports 64-bit
vertex attributes. There's no longer any reason to have it be an option
so let's just delete it.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We were going out of our way to disable dual-location re-mapping in NIR
only to then do the remapping in st_glsl_to_nir.cpp. Presumably, this
was so that double_inputs would be correct for the core state tracker.
However, now that we've it to gl_program::DualSlotInputs which is
unaffected by NIR lowering, we can let NIR lower things for us. The one
tricky bit here is that we have to remap the inputs_read bitfield back
to the single-slot convention for the gallium state tracker to use.
Since radeonsi is the only NIR-capable gallium driver that also supports
GL_ARB_vertex_attrib_64bit, we only have to worry about radeonsi when
making core gallium state tracker changes.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously, we had two field in shader_info: double_inputs_read and
double_inputs. Presumably, the one was for all double inputs that are
read and the other is all that exist. However, because nir_gather_info
regenerates these two values, there is a possibility, if a variable gets
deleted, that the value of double_inputs could change over time. This
is a problem because double_inputs is used to remap the input locations
to a two-slot-per-dvec3/4 scheme for i965. If that mapping were to
change between glsl_to_nir and back-end state setup, we would fall over
when trying to map the NIR outputs back onto the GL location space.
This commit changes the way slot re-mapping works. Instead of the
double_inputs field in shader_info, it adds a DualSlotInputs bitfield to
gl_program. By having it in gl_program, we more easily guarantee that
NIR passes won't touch it after it's been set. It also makes more sense
to put it in a GL data structure since it's really a mapping from GL
slots to back-end and/or NIR slots and not really a NIR shader thing.
Tested-by: Alejandro Piñeiro <apinheiro@igalia.com> (ARB_gl_spirv tests)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
If we have something like:
#ifdef NOT_DEFINED
#define A_MACRO(x) \
if (x)
#endif
The # on the #define is not skipped but the define itself is so
this then gets recognised as #if.
Until 28a3731e3f this didn't happen because we ended up in
<HASH>{NONSPACE} where BEGIN INITIAL was called stopping the
problem from happening.
This change makes sure we never call RETURN_TOKEN_NEVER_SKIP for
if/else/endif when processing a define.
Cc: Ian Romanick <idr@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107772
Tested-By: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
With compat creeping up to geometry and tess shaders, lowering texcoord
accesses/writes becomes more complicated. Since it's an optimization
anyways, just avoid the complication for now.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The spec is quite clear this is not allowed:
From Section 4.4. (Layout Qualifiers) of the GLSL 4.60 spec:
"Layout qualifiers can appear in several forms of declaration.
They can appear as part of an interface block definition or
block member, as shown in the grammar in the previous section.
They can also appear with just an interface-qualifier to establish
layouts of other declarations made with that qualifier:
layout-qualifier interface-qualifier ;
Or, they can appear with an individual variable declared with
an interface qualifier:
layout-qualifier interface-qualifier declaration ;"
From Section 4.10 (Memory Qualifiers) of the GLSL 4.60 spec:
"Layout qualifiers cannot be used on formal function parameters,
and layout qualification is not included in parameter matching."
However on the Nvidia binary driver they actually fail to compile
if image function params don't have a layout qualifier. This results
in applications such as No Mans Sky using layout qualifiers on params.
I've submitted a CTS test to expose this problem in the Nvidia driver
but until that is resolved this patch will help Mesa drivers work
around the issue.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes compilation of some "No Mans Sky" shaders where the stringification
happens in branches intended for DX12.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
