v2: Fixup comment about bits in nir_intrinsics.py
v3: Use varying for primitive shading rate builtin (samuel)
v4: Reoder switch alphabetically
Make divergence of frag_shading_rate an option
v5: Remove stage check for frag_shading_rate in divergence (Samuel)
v6: s/frag_shading_rate_per_subgroup/single_frag_shading_rate_per_subgroup/ (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7795>
We rename it to "modes" to make it clear that it may contain more than
one mode and adjust all the uses of nir_deref_instr::modes to attempt to
handle multiple modes.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
In many cases, fsat, fneg, fabs, ineg, and iabs will get folded into
another instruction as either source or destination modifiers.
Counting them as instructions means that some if-statements won't get
converted to selects. For example,
vec1 32 ssa_25 = flt32 ssa_0, ssa_23.x
/* succs: block_1 block_2 */
if ssa_25 {
block block_1:
/* preds: block_0 */
vec1 32 ssa_26 = fabs ssa_24
vec1 32 ssa_27 = fneg ssa_26
vec1 32 ssa_28 = fabs ssa_20
vec1 32 ssa_29 = fneg ssa_28
vec1 32 ssa_30 = fmul ssa_27, ssa_29
vec1 32 ssa_31 = fsat ssa_30
/* succs: block_3 */
} else {
block block_2:
/* preds: block_0 */
/* succs: block_3 */
}
block block_3:
/* preds: block_1 block_2 */
block_1 isn't really 6 instructions, but it will be counted that way.
Most callers of the peephole_select pass use either 1 or 8. It's very
easy to blow way past either of these limits with things that are really
only one or two actual instructions.
I also tried some fancier things like making sure the fsat was of
another SSA def from the same block, but the simple test was actually
better.
The i965 back-end SEL peephole pass still helps ~700 shaders in
shader-db with this change.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
All Gen6+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 14743694 -> 14738910 (-0.03%)
instructions in affected programs: 156575 -> 151791 (-3.06%)
helped: 1204
HURT: 0
helped stats (abs) min: 1 max: 27 x̄: 3.97 x̃: 3
helped stats (rel) min: 0.15% max: 19.57% x̄: 5.15% x̃: 4.55%
95% mean confidence interval for instructions value: -4.12 -3.82
95% mean confidence interval for instructions %-change: -5.35% -4.95%
Instructions are helped.
total cycles in shared programs: 231749141 -> 231602916 (-0.06%)
cycles in affected programs: 2818975 -> 2672750 (-5.19%)
helped: 876
HURT: 322
helped stats (abs) min: 2 max: 788 x̄: 180.99 x̃: 220
helped stats (rel) min: <.01% max: 43.82% x̄: 20.75% x̃: 19.44%
HURT stats (abs) min: 1 max: 1188 x̄: 38.27 x̃: 20
HURT stats (rel) min: 0.09% max: 102.67% x̄: 5.17% x̃: 1.70%
95% mean confidence interval for cycles value: -130.47 -113.64
95% mean confidence interval for cycles %-change: -14.85% -12.72%
Cycles are helped.
total sends in shared programs: 730495 -> 730491 (<.01%)
sends in affected programs: 46 -> 42 (-8.70%)
helped: 2
HURT: 0
Iron Lake and GM45 had similar results. (Iron Lake shown)
total instructions in shared programs: 8122757 -> 8122617 (<.01%)
instructions in affected programs: 14716 -> 14576 (-0.95%)
helped: 46
HURT: 1
helped stats (abs) min: 1 max: 8 x̄: 3.07 x̃: 3
helped stats (rel) min: 0.36% max: 10.00% x̄: 2.54% x̃: 1.06%
HURT stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel) min: 1.59% max: 1.59% x̄: 1.59% x̃: 1.59%
95% mean confidence interval for instructions value: -3.42 -2.54
95% mean confidence interval for instructions %-change: -3.28% -1.62%
Instructions are helped.
total cycles in shared programs: 188510100 -> 188509780 (<.01%)
cycles in affected programs: 58994 -> 58674 (-0.54%)
helped: 32
HURT: 1
helped stats (abs) min: 2 max: 96 x̄: 10.06 x̃: 6
helped stats (rel) min: 0.05% max: 15.29% x̄: 1.37% x̃: 0.31%
HURT stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
HURT stats (rel) min: 0.68% max: 0.68% x̄: 0.68% x̃: 0.68%
95% mean confidence interval for cycles value: -16.34 -3.06
95% mean confidence interval for cycles %-change: -2.46% -0.15%
Cycles are helped.
The difference between imov and fmov has been a constant source of
confusion in NIR for years. No one really knows why we have two or when
to use one vs. the other. The real reason is that they do different
things in the presence of source and destination modifiers. However,
without modifiers (which many back-ends don't have), they are identical.
Now that we've reworked nir_lower_to_source_mods to leave one abs/neg
instruction in place rather than replacing them with imov or fmov
instructions, we don't need two different instructions at all anymore.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
This will allow us to make use of the selection control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Note this only supports if-statements as we dont support switches
in NIR.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
NIR metadata validation verifies that the debug bit was unset (by a call
to nir_metadata_preserve) if a NIR optimization pass made progress on
the shader. With the expectation that the NIR shader consists of only a
single main function, it has been safe to call nir_metadata_preserve()
iff progress was made.
However, most optimization passes calculate progress per-function and
then return the union of those calculations. In the case that an
optimization pass makes progress only on a subset of the functions in
the shader metadata validation will detect the debug bit is still set on
any unchanged functions resulting in a failed assertion.
This patch offers a quick solution (short of a larger scale refactoring
which I do not wish to undertake as part of this series) that simply
unsets the debug bit on unchanged functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
On some GPUs, especially older Intel GPUs, some math instructions are
very expensive. On those architectures, don't reduce flow control to a
csel if one of the branches contains one of these expensive math
instructions.
This prevents a bunch of cycle count regressions on pre-Gen6 platforms
with a later patch (intel/compiler: More peephole select for pre-Gen6).
v2: Remove stray #if block. Noticed by Thomas.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
That flow control may be trying to avoid invalid loads. On at least
some platforms, those loads can also be expensive.
No shader-db changes on any Intel platform (even with the later patch
"intel/compiler: More peephole select").
v2: Add a 'indirect_load_ok' flag to nir_opt_peephole_select. Suggested
by Rob. See also the big comment in src/intel/compiler/brw_nir.c.
v3: Use nir_deref_instr_has_indirect instead of deref_has_indirect (from
nir_lower_io_arrays_to_elements.c).
v4: Fix inverted condition in brw_nir.c. Noticed by Lionel.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be removed at the end of the transition, but add some tracking
plus asserts to help ensure that lowering passes are called at the
correct point (pre or post deref instruction lowering) as passes are
converted and the point where lower_deref_instrs() is called is moved.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that the NIR casting functions have type assertions, we have a bunch of
assertions that aren't needed anymore.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
One of NIR's invariants is that control flow lists always start and end
with blocks. There's no good reason why we should return a cf_node from
these functions since we know that it's always a block. Making it a block
lets us remove a bunch of code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
VC4 was running into a major performance regression from enabling control
flow in the glmark2 conditionals test, because of short if statements
containing an ffract.
This pass seems like it was was trying to ensure that we only flattened
IFs that should be entirely a win by guaranteeing that there would be
fewer bcsels than there were MOVs otherwise. However, if the number of
ALU ops is small, we can avoid the overhead of branching (which itself
costs cycles) and still get a win, even if it means moving real
instructions out of the THEN/ELSE blocks.
For now, just turn on aggressive flattening on vc4. i965 will need some
tuning to avoid regressions. It does looks like this may be useful to
replace freedreno code.
Improves glmark2 -b conditionals:fragment-steps=5:vertex-steps=0 from 47
fps to 95 fps on vc4.
vc4 shader-db:
total instructions in shared programs: 101282 -> 99543 (-1.72%)
instructions in affected programs: 17365 -> 15626 (-10.01%)
total uniforms in shared programs: 31295 -> 31172 (-0.39%)
uniforms in affected programs: 3580 -> 3457 (-3.44%)
total estimated cycles in shared programs: 225182 -> 223746 (-0.64%)
estimated cycles in affected programs: 26085 -> 24649 (-5.51%)
v2: Update shader-db output.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
nir_opt_peephole_select has the job of removing IF statements with no side
effects. However, if the IF statement's successor didn't have any
instructions in it, we were skipping it, which occurred in mupen64 on vc4
with glsl_to_nir enabled:
instructions in affected programs: 6134 -> 4120 (-32.83%)
total uniforms in shared programs: 38268 -> 38219 (-0.13%)
No changes on Haswell shader-db.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_use(\([^,]*\),\s*\([^,]*\))/nir_foreach_use(\2, \1)/
and similar expressions for nir_foreach_use_safe, etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_function(\([^,]*\),\s*\([^,]*\))/nir_foreach_function(\2, \1)/
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_phi_src(\([^,]*\),\s*\([^,]*\))/nir_foreach_phi_src(\2, \1)/
and a similar expression for nir_foreach_phi_src_safe.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_instr(\([^,]*\),\s*\([^,]*\))/nir_foreach_instr(\2, \1)/
and similar expressions for nir_foreach_instr_safe etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Squash multiple commits addressing the new parameter in different
files so we don't break the build (Iago)
v3: Fix tgsi (Samuel)
v4: Fix nir_clone.c (Samuel)
v5: Fix vc4 and freedreno (Iago)
v6 (Sam)
- Fix build errors in nir_lower_indirect_derefs
- Use helper to get type size from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
