GLXCreate{,New}Context, like most X resource creation requests, does not
emit a reply and therefore is emitted into the X stream asynchronously.
However, unlike most resource creation requests, the GLXContext we
return is a handle to library state instead of an XID. So if context
creation fails for any reason - say, the server doesn't support indirect
contexts - then we will fail in strange places for strange reasons.
We could make every GLX entrypoint robust against half-created contexts,
or we could just verify that context creation worked. Reuse the
__glXIsDirect code to do this, as a cheap way of verifying that the
XID is real.
glXCreateContextAttribsARB solves this by using the _checked version of
the xcb command, so effectively this change makes the classic context
creation paths as robust as CreateContextAttribs.
v2: Better use of Bool, check that error != NULL first (Olivier Fourdan)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
In function 'uint8_t nv50_ir::getTEXSMask(uint8_t)':
warning: control reaches end of non-void function [-Wreturn-type]
Reported-by: Moiman@freenode
Fixes: f821e80213
"gm107/ir: use scalar tex instructions where possible"
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
It only behaves any different from amdgpu_bo_handle_type_kms with
libdrm 2.4.93, and it breaks if an older version is picked up.
Bugzilla: https://bugs.freedesktop.org/108096
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Got tired of remembering the PCI ids.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
VK_EXT_conditional_rendering says that copy commands should not be
affected by conditional rendering.
Cc: 18.2 18.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
TEXS, TLD4 and TLD4S are variants of tex instructions which are more
scalar, which gives RA more freedom and is less likely to insert silly
MOVs to satisfy quad registers.
shader-db changes:
total instructions in shared programs : 7687265 -> 7614782 (-0.94%)
total gprs used in shared programs : 803620 -> 798045 (-0.69%)
total shared used in shared programs : 639636 -> 639636 (0.00%)
total local used in shared programs : 24648 -> 24648 (0.00%)
total bytes used in shared programs : 82103400 -> 81330696 (-0.94%)
local shared gpr inst bytes
helped 0 0 3648 10647 10647
hurt 0 0 464 205 205
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The biggest change here is the rename of VK_NVX_ray_tracing to
VK_NV_ray_tracing and the total removal of VK_KHR_mir_surface.
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Enables on R600 and makes pass:
dEQP-GLES31.functional.srgb_texture_decode.skip_decode.sr8.*
dEQP-GLES31.functional.texture.filtering.cube_array.formats.sr8*
v2: remove chunk for dri/radeon (Emil)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Allocating through Gralloc implies buffers are going to be used
outside the driver. We have special MOCS settings for external BOs and
we probably want to use them here too.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a1220e7311 ("anv/android: Set the BO flags in bo_cache_import (v2)")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This reduces the amount of #ifdef ANDROID we'll have to have inside
the driver. Potentially offering better coverage of the android
extensions.
v2: Move anv_android.h include before anv_entrypoints.h (Tapani)
Fix autotools android build (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
At higher resolutions with the addition of MSAA, the number of tiles
can increase to the point where we use more than one VSC pipe per
tile. Which would cause us to calculate an out-of-bounds offset for
VSC_SIZE_ADDRESS. So don't try to be clever, just always put it at
a fixed offset assuming the max 32 VSC pipes in use.
Signed-off-by: Rob Clark <robdclark@gmail.com>
After commit a9fb331ea ("wayland/egl: update surface size on window
resize"), the surface size is updated as soon as the resize is done, and
`update_buffers()` would resize only if the surface size differs from
the attached size.
However, in the case of swrast, there is no resize callback and the
attached size is updated in `dri2_wl_swrast_commit_backbuffer()` prior
to the `swrast_update_buffers()` so the attached size is always up to
date when it reaches `swrast_update_buffers()` and the surface is never
resized.
This can be observed with "totem" using the GDK backend on Wayland (the
default) when running on software rendering:
$ LIBGL_ALWAYS_SOFTWARE=true CLUTTER_BACKEND=gdk totem
Resizing the window would leave the EGL surface size unchanged.
To avoid the issue, partially revert the part of commit a9fb331ea for
`swrast_update_buffers()` and resize on the win size and not the
attached size.
Fixes: a9fb331ea - wayland/egl: update surface size on window resize
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
CC: Daniel Stone <daniel@fooishbar.org>
CC: Juan A. Suarez Romero <jasuarez@igalia.com>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
If the user provides an invalid display or device the ToVendor lookup
will fail.
In this case, the local [Mesa vendor] error code will be set. Thus on
sequential eglGetError(), the error will be EGL_SUCCESS.
To be more specific, GLVND remembers the last vendor and calls back
into it's eglGetError, although there's no guarantee to ever have had
one.
v2:
- Add _eglError call, so the debug callback is executed (Kyle)
- Drop XXX comment.
Piglit: tests/egl/spec/egl_ext_device_query
Fixes: ce562f9e3f ("EGL: Implement the libglvnd interface for EGL (v3)")
Cc: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kyle Brenneman <kbrenneman@nvidia.com>
eglQueryDevicesEXT (unlike the other three functions) does not depend
on the display. It is implemented in GLVND, which calls into each
driver collecting the list of devices and presenting it to the user.
For the other entrypoints, GLVND acts as pass through stub calling into
the vendor library. The vendor implementation calls back into GLVND to
get the vendor dispatch. Then the driver proceeds to call itself via
the said dispatch.
This design makes is possible to keep using "old" GLVND with newer
vendor drivers. Since effectively all the extension code is within the
latter itself.
Without said entrypoints, any user will outright crash - as reported in
the bug report.
Note: there's a follow-up fix needed to our GLVND code, to make piglit
happy.
v2: add some beefy documentation in the commit message.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108635
Fixes: 7552fcb7b9 ("egl: add base EGL_EXT_device_base implementation")
Reported-by: kyle.devir@mykolab.com
Cc: kyle.devir@mykolab.com
Acked-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 4373dd3215 ("st/va: Support YUV formats in vaCreateSurfaces")
Cc: Drew Davenport <ddavenport@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Message that may show the culprit of assert now will
be dumped before that for debug purposes.
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Lionel G Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We can only map at page aligned offsets. We got that wrong with buffer
size where (size % 4096) != 0 (anv has a WA buffer of 1024).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Building of 32bit Mesa may fail if __SSE__ is not specified.
Added missed dependency from libm.
v2: avoided dependecy on any flag, just link
v3: meson doesn't fail, but have added dependency on libm
CC: Dylan Baker <dylan@pnwbakers.com>
CC: Lionel G Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108560
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The spec says:
"vkCmdCopyQueryPoolResults is considered to be a transfer
operation, and its writes to buffer memory must be synchronized
using VK_PIPELINE_STAGE_TRANSFER_BIT and VK_ACCESS_TRANSFER_WRITE_BIT
before using the results."
VK_PIPELINE_STAGE_TRANSFER_BIT will wait for compute to be idle,
while VK_ACCESS_TRANSFER_WRITE_BIT will invalidate both L1 vector
caches and L2. So, it's useless to set those flags internally.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
In the non-SSO case, where multiple shader stages are linked together,
we were recording garbage pipe_stream_output_info structures for all
but the last enabled geometry-processing stage.
Specifically, we were using the gl_transform_feedback_info from
shader_program->last_vert_prog (the stage whose outputs will be
recorded)...but were pairing it with the output varying mappings
from the current shader stage. For example, a program with a VS and
GS, the VS's pipe_shader_state would have a pipe_stream_output_info
based on the GS transform feedback info, but the VS output mapping.
This generally worked out okay because only the pipe_stream_output_info
for the last stage really matters - the others can be ignored. However,
we'd like to avoid confusing the pipe driver. In particular, my new
driver translates the stream out information to hardware packets at
bind_{vs,tes,gs}_state() time...and was hitting asserts about garbage
varyings that didn't exist.
This patch changes st/mesa to record a blank pipe_stream_output_info
with num_outputs = 0 for all stages prior to last_vert_prog. The last
one is captured as normal.
(In the fully-SSO case, nothing should change - each program contains
a single shader stage, so last_vert_prog *is* the current shader.)
Tested with llvmpipe (piglit's gpu profile), and freedreno (a3xx,
gpu profile with -t transform.feedback). Fixes several hundred CTS
tests on my new driver.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
There are some cases where the VS is the only stage enabled, it uses the
entire URB, and the URB is large enough that placing later stages after
the VS exceeds the number of bits for "URB Starting Address".
For example, on Icelake GT2, "varying-packing-simple mat2x4 array" from
Piglit is getting a starting offset of 128 for the GS/HS/DS. But the
field is only large enough to hold an offset of 127.
i965 doesn't hit any genxml assertions because it's still using the old
OUT_BATCH mechanism. 128 << GEN7_URB_STARTING_ADDRESS_SHIFT (57) == 0,
with the extra bit falling off the end. So we place the disabled stage
at the beginning of the URB (overlapping with push constants). This is
likely okay since it's a zero size region (0 entries).
It seems like the Vulkan driver might hit this assertion, however, and
the situation seems harmless. To work around this, always place
disabled stages at the start of the URB, so the last enabled stage can
fill the remaining space without overflowing the field.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
libmesa_git_sha1 whole static dependency is added to get git_sha1.h header
and avoid following building error:
external/mesa/src/amd/vulkan/radv_device.c:46:10:
fatal error: 'git_sha1.h' file not found
^
1 error generated.
Fixes: 9d40ec2cf6 ("radv: Add support for VK_KHR_driver_properties.")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
In some cases (not building with llvm, which automatically pulls in
pthreads) nine needs to be directly linked with pthreads. Fixes building
on x86 (32 bit) without llvm.
Distro bug: https://bugs.gentoo.org/670094
Fixes: 6b4c7047d5
("meson: build gallium nine state_tracker")
Tested-by: Rafal Lalik <rafallalik@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
WA_1606682166:
Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time and
the feature must remain disabled permanently.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
