It was calloc'd to 0 which is PIPE_PRIM_POINTS, which means that we
fail to notice an initial primitive of points being new, and fail at
updating the "primitive is points or lines" field.
We do not need to reset this on device loss because we're tracking
the last primitive mode sent to us on the CPU via draw_vbo, not the
last primitive mode sent to the GPU.
Fixes several tests:
- dEQP-GLES3.functional.clipping.point.wide_point_clip
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_center
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_corner
Fixes: dcfca0af7c ("iris: Set XY Clipping correctly.")
Add a ppir dummy node for nir_ssa_undef_instr, create a reg for it and mark
it as undefined, so that regalloc can set it non-interfering to avoid
register pressure.
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Vasily Khozuzhick <anarsoul@gmail.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
We are about to patch panfrost_flush() to flush all pending batches,
not only the current one. In order to do that, we need to move the
'flush single batch' code to panfrost_batch_submit().
While at it, we get rid of the existing pipelining logic, which is
currently unused and replace it by an unconditional wait at the end of
panfrost_batch_submit(). A new pipeline logic will be introduced later
on.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
panfrost_flush() is about to be reworked to flush all pending batches,
but we want the fence to block on the last one. Let's move the fence
creation logic in panfrost_flush() to prepare for this situation.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
panfrost_draw_vbo() Might call the primeconvert/without_prim_restart
helpers which will enter the ->draw_vbo() again. Let's delay
payloads[].offset_start initialization so we don't initialize them
twice.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
panfrost_attach_vt_xxx() functions are now passed a batch, and the
generated FB desc is kept in panfrost_batch so we can switch FBs
without forcing a flush. The postfix->framebuffer field is restored
on the next attach_vt_framebuffer() call if the batch already has an
FB desc.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
So we can emit SET_VALUE jobs for a batch that's not currently bound
to the context.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
We'll soon be able to flush a batch that's not currently bound to the
context, which means ctx->pipe_framebuffer will not necessarily be the
FBO targeted by the wallpaper draw. Let's prepare for this case and
use ctx->wallpaper_batch in panfrost_blit_wallpaper().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
So we can emit such jobs to a batch that's not currently bound to the
context.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
We need that if we want to upload transient buffers to a batch that's
not currently bound to the context, which in turn will be needed if we
want to relax the batch serialization we have right now (only flush
batches when we need to: on a flush request, or when one batch depends
on the result of other batches).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Rename panfrost_is_scanout() into panfrost_batch_is_scanout(), pass it
a batch instead of a context and move the code to pan_job.c.
With this in place, we can now test if a batch is targeting a scanout
FB even if this batch is not bound to the context.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Will be replaced by something similar but using a BOs as keys instead
of resources.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
This way we have all the fb_state information directly attached to a
batch and can pass only the batch to functions emitting CMDs, which is
needed if we want to be able to queue CMDs to a batch that's not
currently bound to the context.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
The V3D documentation states that primitive counters are reset when
we emit Tile Binning Mode Configuration items, which we do at the start
of each draw call, however, in the actual hardware this doesn't seem to
take effect when transform feedback is not active (this doesn't happen in
the simulator). This causes a problem in the following scenario:
glBeginTransformFeedback()
glDrawArrays()
glPauseTransformFeedback()
glDrawArrays()
glResumeTransformFeedback()
glEndTransformFeedback()
The TF pause will trigger a flush of the primitive counters, which results
in a correct number of primitives up to that point. In theory, the counter
should then be reset when we execute the draw after pausing TF, but that
doesn't happen, and since TF is enabled again by the resume command before
we end recording, by the time we end the transform feedback recording we
again check the counters, but instead of reading 0, we read again the same
value we read at the time we paused, incorrectly accumulating that value
again.
In theory, we should be able to avoid this by using the other method to
reset the primitive counters: using operation 1 instead of 0 when we
flush the counts to the buffer at the time we pause, but again, this
doesn't seem to be work and we still see obsolete counts by the time we
end transform feedback.
This patch fixes the problem by not accumulating TF primitive counts
unless we know we have actually queued draw calls during transform
feedback, since that seems to effectively reset the counters. This should
also be more performant, since it saves unnecessary stalls for the
primitive counters to be updated when we know there haven't been any
new primitives drawn.
Fixes CTS tests:
dEQP-GLES3.functional.transform_feedback.*
Reviewed-by: Eric Anholt <eric@anholt.net>
This was updating the counter for the indexed draw path only, but we are
already updating the counter for all paths a bit later, so this is only
duplicating counts for indexed paths.
Reviewed-by: Eric Anholt <eric@anholt.net>
Instead of running it with the Wayland platform, which introduces
unwanted dependencies and complexity.
Makes tests run 30% faster, as well.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
The AnTuTu "garden" benchmark overflows the fixed size constbuffer
stateobject, so lets be more clever and calculate (a potentially
slightly pessimistic) actual size.
Signed-off-by: Rob Clark <robdclark@chromium.org>
fd6_blitter.c:724:31: warning: passing argument 1 of ‘fd_resource_level_linear’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
"partial" because `nir_intrinsics_h` was missing.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
"partial" because `nir_intrinsics_h` was missing.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
As introduced in "v3d: flag dirty state when binding new sampler states"
we need to add support for compute states. New flag VC5_DIRTY_COMPTEX and
VC5_DIRTY_UNCOMPILED_CS are introduced.
Reaching 33 flags at the dirty field forces us to change the type to
uint_64. Flags are reordered and empty continuous bits are available
for future pipeline stages.
v2: Update flag conditions to compile cs shader. (Eric Antholt)
Now dirty flags use uint_64t and flags are reordered.
Added VC5_DIRTY_UNCOMPILED_CS flag.
Reviewed-by: Eric Anholt <eric@anholt.net>
Translating TGSI_INTERPOLATE_COLOR as INTERP_MODE_SMOOTH made
it for drivers impossible to have flatshaded color inputs.
Translate it to INTERP_MODE_NONE which drivers interpret as
smooth or flat depending on flatshading state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111467
Fixes: 770faf54 ("tgsi_to_nir: Improve interpolation modes.")
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We have only two defines that aren't from DRM_FORMAT_*: SARGB and
SABGR. Keep only those as __DRI_IMAGE_FOURCC and garbage collect the
rest.
While this header is also used from the X server, the X server doesn't
use any __DRI_IMAGE enums.
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Initial benchmarking didn't show any performance benefits. But it might eventually.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To go any further than this would be to break the current version of
Android.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
[ Michel Dänzer: Dropped jessie line from debian-install.sh again ]
This is unsupported by meson and may become a hard error in the future.
Fixes: 5adfc8602c
("lima/ppir: move sin/cos input scaling into NIR")
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Looks like .out_sync wasn't set in lima_submit_start(), as result
submit completion fence was never signalled.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
This is a pipe format, not a boolean.
Fixes: 5849e0612c ("gallium/auxiliary: Add util_format_get_depth_only() helper.")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Fixes dEQP-GLES3.functional.texture.specification.texstorage3d.size.3d_2x2x2_2_levels
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
