This makes more sense than OUT_OF_HOST_MEMORY. Technically, you can
recover from a failed execbuf2 but the batch you just submitted didn't
fully execute so things are in an ill-defined state. The app doesn't want
to continue from that point anyway.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We require 12 bytes of headers but in some cases we just need 4.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Previously, we were creating the shader with a NULL ralloc context and then
trusting in blorp_compile_fs to clean it up. The only problem was that
blorp_compile_fs didn't clean up its context properly so we were leaking.
When I went to fix that, I realized that it couldn't because it has to
return the shader binary which is allocated off of that context and used by
the caller. The solution is to make blorp_compile_fs take a ralloc
context, allocate the nir_shaders directly off that context, and clean it
all up in whatever function creates the shader and calls blorp_compile_fs.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "12.0, 13.0" <mesa-stable@lists.freedesktop.org>
With dealing with rectangles in compressed images, you can have a width or
height that isn't a multiple of the corresponding compression block
dimension but only if that edge of your rectangle is on the edge of the
image. When we call convert_to_single_slice, it creates an 2-D image and a
set of tile offsets into that image. When detecting the right-edge and
bottom-edge cases, we weren't including the tile offsets so the assert
would misfire. This caused crashes in a few UE4 demos
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: "Eero Tamminen" <eero.t.tamminen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98431
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Tested-by: "Eero Tamminen" <eero.t.tamminen@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Here brw_setup_vue_interpolation() is rewritten not to use the InterpQualifier
array in gl_fragment_program which will allow us to remove it.
This change also makes the code which is only used by gen4/5 more self contained
as it now has its own gen5_fragment_program struct rather than storing the map
in brw_context. This means the interpolation map will only get processed once
and will get stored in the in memory cache rather than being processed everytime
the fs changes.
Also by calling this from the fs compile code rather than from the upload code
and using the interpolation assigned there we can get rid of the
BRW_NEW_INTERPOLATION_MAP flag.
It might not seem ideal to add a gen5_fragment_program struct however by the end
of this series we will have gotten rid of all the brw_{shader_stage}_program
structs and replaced them with a generic brw_program struct so there will only
be two program structs which is better than what we have now.
V2: Don't remove BRW_NEW_INTERPOLATION_MAP from dirty_bit_map until the following
patch to fix build error.
V3 - Suggestions by Jason:
- name struct gen4_fragment_program rather than gen5_fragment_program
- don't use enum with memset()
- create interp mode set helper and simplify logic to call it
- add assert when calling function to show prog will never be NULL for
gen4/5 i.e. no Vulkan
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When restoring something from shader cache we won't have and don't
want to create a nir_shader this change detaches the two.
There are other advantages such as being able to reuse the
shader info populated by GLSL IR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
git history shows "abi_versions" was used from the outset.
Cc: <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98415
Reviewed-by: Dave Airlie <airlied@redhat.com>
With the isl_format_supports* helpers, we can now conveniently
report support for this format on Cherry View.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92925
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Vulkan has a multi-arch problem... The idea behind the Vulkan loader is
that you have a little json file on your disk that tells the loader where
to find drivers. The loader looks for these json files in standard
locations, and then goes and loads the my_driver.so's that they specify.
This allows you as a driver implementer to put their driver wherever on the
disk they want so long as the ICD points in the right place.
For a multi-arch system, however, you may have multiple libvulkan_intel.so
files installed that the loader needs to pick depending on architecture.
Since the ICD file format does not specify any architecture information,
you can't tell the loader where to find the 32-bit version vs. the 64-bit
version. The way that packagers have been dealing with this is to place
libvulkan_intel.so in the top level lib directory and provide just a name
(and no path) to the loader. It will then use the regular system search
paths and find the correct driver. While this solution works fine for
distro-installed Vulkan drivers, it doesn't work so well for user-installed
drivers because they may put it in /opt or $HOME/.local or some other more
exotic location. In this case, you can't use an ICD json file with just a
library name because it doesn't know where to find it; you also have to add
that to your library lookup path via LD_LIBRARY_PATH or similar.
This patch handles both use-cases by taking advantage of the fact that the
loader dlopen()s each of the drivers and, if one dlopen() calls fails, it
silently continues on to open other drivers. By suffixing the icd file, we
can provide two different json files: intel_icd.x86_64.json and
intel_icd.i686.json with different paths. Since dlopen() will only succeed
on the libvulkan_intel.so of the right arch, the loader will happily ignore
the others and load that one. This allows us to properly handle multi-arch
while still providing a full path so user installs will work fine.
I tested this on my Fedora 25 machine with 32 and 64-bit builds of our
Vulkan driver installed and 32 and 64-bit builds of crucible. It seems to
work just fine.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
This moves the shared code to a common subdirectory
and makes anv linked to that code instead of the copy
it was using.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This moves all the alloc/free in anv to the generic helpers.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just removes the anv vector code and uses the new helper.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Building the Mesa 12.0.3 distfile failed on a system without python
as generated files were not included in the distfile.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
% pattern rules are a GNU extension. Convert the use of one to a
inference rule to allow this to build on OpenBSD.
This is a related change to the one made in
e3d43dc5ea
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
All code that would have once called this can now call the gen-specific
version. The switching version is no longer needed.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
It really should have gone here all along. We were trying a bit too hard
to make it gen-agnostic just because it didn't have any #if's.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
