The various base addresses are simply addresses. There may or may not
be a buffer located at those addresses. So, it doesn't make much sense
to request one. Just save the raw address so we can add it later, when
asking about BOs at the final <base + offset> address.
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Normally, i965 programs STATE_BASE_ADDRESS every batch, and puts all
state for a given base in a single buffer.
I'm working on a prototype which emits STATE_BASE_ADDRESS only once at
startup, where each base address is a fixed 4GB region of the PPGTT.
State may live in many buffers in that 4GB region, even if there isn't
a buffer located at the actual base address itself.
To handle this, we need to save the STATE_BASE_ADDRESS values across
multiple batches, rather than assuming we'll see the command each time.
Then, each time we see a pointer, we need to ask the driver for the BO
map for that data. (We can't just use the map for the base address, as
state may be in multiple buffers, and there may not even be a buffer
at the base address to map.)
v2: Fix things caught in review by Lionel:
- Drop bogus bind_bo.size check.
- Drop "get the BOs again" code - we just get the BOs as needed
- Add a message about interface descriptor data being unavailable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
By default we set no limit, but the debug batch decoder in i965 sets
it to 100.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Given an arbitrary batch, we don't always know what the size of certain
things are, such as how many entries are in a binding table. But it's
easy for the driver to track that information, so with a simple callback
we can calculate this correctly for INTEL_DEBUG=bat.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
<register> & <struct> elements always have fixed length. The
get_length() method implies that we're dealing with an instruction in
which the length is encoded into the variable data but the field
iterator uses it without checking what kind of gen_group it is dealing
with.
Let's make get_length() report the correct length regardless of the
gen_group (register, struct or instruction).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prior to printing a decoded field, print out all dwords that field
belongs to. In particular with address fields spanning multiple
dwords, we want to have all the dwords presented before the field is
decoded to make it easier to read.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Previously, if a group was nested in another group such that it didn't
start on a dword boundary, we would decode it as if it started at the
start of its first dword. This changes things to work even more in
terms of bits so that we can properly decode these structs. This
affects MOCS, attribute swizzles, and several other things.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This makes use of ralloc to simplify the destruction. We can also
store instructions in hash tables.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
These fields are of little importance as they're used to recognize
instructions.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
We used to print invalid data when the last field was being clamped to
32bits due to Dword Length of the whole instruction. Here is an
example where the decoder read part of the next instruction instead of
stopping at the 32bit limit:
0x000ce0b4: 0x10000002: MI_STORE_DATA_IMM
0x000ce0b4: 0x10000002 : Dword 0
DWord Length: 2
Store Qword: 0
Use Global GTT: false
0x000ce0b8: 0x00045010 : Dword 1
Core Mode Enable: 0
Address: 0x00045010
0x000ce0bc: 0x00000000 : Dword 2
0x000ce0c0: 0x00000000 : Dword 3
Immediate Data: 8791026489807077376
With this change we have the proper value :
0x000ce0b4: 0x10000002: MI_STORE_DATA_IMM (4 Dwords)
0x000ce0b4: 0x10000002 : Dword 0
DWord Length: 2
Store Qword: 0
Use Global GTT: false
0x000ce0b8: 0x00045010 : Dword 1
Core Mode Enable: 0
Address: 0x00045010
0x000ce0bc: 0x00000000 : Dword 2
0x000ce0c0: 0x00000000 : Dword 3
Immediate Data: 0
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The xml files don't always have fields in order. This might confuse
our parsing of the commands. Let's have the fields in order. To do
this, the easiest way it to use a linked list. It also helps a bit
with the iterator.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Groups containing fields smaller than a DWord were not being decoded
correctly. For example:
<group count="32" start="32" size="4">
<field name="Vertex Element Enables" start="0" end="3" type="uint"/>
</group>
gen_field_iterator_next would properly walk over each element of the
array, incrementing group_iter, and calling iter_group_offset_bits()
to advance to the proper DWord. However, the code to print the actual
values only considered iter->field->start/end, which are 0 and 3 in the
above example. So it would always fetch bits 3:0 of the current DWord
when printing values, instead of advancing to each element of the array,
printing bits 0-3, 4-7, 8-11, and so on.
To fix this, we add new iter->start/end tracking, which properly
advances for each instance of a group's field.
Caught by Matt Turner while working on 3DSTATE_VF_COMPONENT_PACKING,
with a patch to convert it to use an array of bitfields (the example
above).
This also fixes the decoding of 3DSTATE_SBE's "Attribute Active
Component Format" fields.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The current way of handling groups doesn't seem to be able to handle
MI_LOAD_REGISTER_* with more than one register. This change reworks
the way we handle groups by building a traversal list on loading the
GENXML files.
Let's say you have
Instruction {
Field0
Field1
Field2
Group0 (count=2) {
Field0-0
Field0-1
}
Group1 (count=4) {
Field1-0
Field1-1
}
}
We build of linked on load that goes :
Instruction -> Group0 -> Group1
All of those are gen_group structures, making the traversal trivial.
We just need to iterate groups for the right number of timers (count
field in genxml).
The more fancy case is when you have only a single group of unknown
size (count=0). In that case we keep on reading that group for as long
as we're within the DWordLength of that instruction.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Before this commit, when a group with count="0" is found, only one field
is added to the struct representing the instruction. This causes only
one entry to be printed by aubinator, for variable length groups.
With this commit we "detect" that there's a variable length group
(count="0") and store the offset of the last entry added to the struct
when reading the xml. When finally reading the aubdump file, we check
the size of the group and whether we have variable number of elements,
and in that case, reuse the last field to add the remaining elements.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This is pretty much the same tool as what i-g-t has, only with a more
fancy decoding of the instructions/registers. It also doesn't support
anything before gen4.
v2 (from Matt): Drop authors
Remove undefined automake variable
v3: Fix incorrect offsets for dword > 1 (Jordan)
v4: Fix decompression error with large blobs (Jordan)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Some packets like 3DSTATE_VF_STATISTICS, 3DSTATE_DRAWING_RECTANGLE,
3DPRIMITIVE, PIPELINE_SELECT, etc... have configurable fields in
dword0, we probably want to print those.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
