Earlier commit replaced the default platform specific libglapi.so name
with an #error.
This may have been overzealous since the name is the correct for the BSD
platforms, at least. Reinstate the hunk - bringing back OpenBSD, et al.
to a successful build state.
Fixes: 7a9c92d071 ("egl/dri2: non-shared glapi cleanups")
[Emil Velikov: format the patch from Eric, add commit message and tag.]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Since commit 63c5d5c6c4, the surfaceless
platform has allowed creation of pbuffer surfaces. But the vtable entry
for eglSwapBuffers has remained NULL.
Discovered by running a little pbuffer test.
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The egl docs directory no longer exists as of
88b5c36fe1.
Remove it from EXTRA_DIST to unbreak 'make dist'
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reminiscent from the pre-loader days, were we had multiple instances of
the loader logic in separate places and one could build a "GALLIUM_ONLY"
version.
Since that is no longer the case and the loaders (glx/egl/gbm) do not
(and should not) require to know any classic/gallium specific we can
drop the argument and the related code.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This was some kind of leftover in commit acd35c8 and format_count
array variable (declared in outer scope) should be used instead.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Fixes: acd35c8758 ("egl/android: tweak droid_add_configs_for_visuals()")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
i is used for the driver_configs, while j is for the visuals.
Fixes: 4b8a55809e ("egl/surfaceless: tweak surfaceless_add_configs_for_visuals()")
Reported-by: Chad Versace <chadversary@chromium.org>
Tested-by: Chad Versace <chadversary@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
It was the lone file in src/egl/docs. Move it to where the other specs
live, in $MESA_TOP/docs/specs.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Mesa's set of supported platform extensions depends on the autoconf
option --with-egl-platforms=foo,bar,baz. If --with-egl-platforms lacks
foo, then eglGetPlatformDisplay(EGL_PLATFORM_FOO, ...) unconditonally
fails.
So, if --with-egl-platforms lacks foo, then remove
EGL_VENDOR_platform_foo from the EGL client extension string.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
... in dri2_x11_add_configs_for_visuals().
Currently the latter does not consider that, thus in such cases it adds
"empty" configs in the list.
Properly account for things and as we do that we can reuse count,
instead of calling _eglGetArraySize to determine if we've added any
configs.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Analogous to previous commits - with an extra bonus.
Current code, apart from not attributing the lack of 'per visual'
and overall configs also overwrites the newly added config.
Namely if the dpy supports two or more of the supported formats
(XRGB8888, ARGB8888 and RGB565) earlier configs will be overwritten
and the the final one will be stored, since the we use the same index
for all three in our dri2_add_config call.
v2: Use correct comparison in loop conditional (Eric)
Use valid C initializer (Gurchetan)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Analogous to previous commit.
v2: Use correct comparison in loop conditional (Eric)
Use valid C initializer (Gurchetan)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Iterate over the driver_configs first in order to cut down the number of
getConfigAttrib() calls by a factor of 5.
While we're here, also drop the sentinel of the visuals array. We
already know its size so we can use that and save a few bytes.
v2: Use correct comparison in loop conditional (Eric)
Use valid C initializer (Gurchetan)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Factor out and rework the existing code so that it prints a debug
message if we have zero configs for any visual.
As a nice side effect we now provide a correct (sequential ID) when
creating a config (via dri2_add_config).
v2: Use correct comparison in loop conditional (Eric)
Use valid C initializer (Gurchetan)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Currently we print a debug message if the total configs is non-zero only
to do the same (at an error level) as we return from the function.
Rework the message to print if we're missing a config for the given
format.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Introduce a helper and use it throughout the platform code. This allows
us to reduce the amount of ifdef(s) and (potentially) use
kms_swrast_dri.so for !drm platforms (namely wayland and x11).
Note: in the future as other platforms (android, surfaceless) support
the extension they can reuse the helper.
v2: Rebase, check for device_name.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
The core egl/dri2 already sets the extension bit _only_ when possible -
which in Android's case is always.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Do not loop over all matches if we've already found one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
v2: dri2_bind_extensions() now takes optional as an argument.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Will allow us to reuse the function for optional extensions and fold a
bit of code.
v2: Make dri2_bind_extensions::optional flag an argument to
dri2_bind_extensions (Kristian).
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Consistently indent with space rather than a mix of tab and
spaces.
v2: Keep the structs properly aligned (Eric).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The dri3 version of commits 60e9c35b3a and 6de9a03bed.
While using xcb_connect() guarantees that we always get a non NULL
return value, XGetXCBConnection() does/can not.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Remove the error prone fixed size array.
While we're here also rename to loader_extensions like in the GLX code.
v2: Rebase. Keep image_loader_extension within the wayland_drm
dri2_loader_extensions list.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Analogous to earlier commits.
Note: the actual version of the extension is 1, since it does not
implement .putImage2.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Similar to the dri2 one - the extension stored in struct
dri2_egl_display is unused.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Analogous to the earlier android and wayland patches. As we're here we
can drop exposing the old version of the extension.
Any dri loader/driver interface use lower bound checking thus exposing
dri2 loader v3 to a v2 capable driver is perfectly normal.
v2: Preserve compat with dri2_minor < 1. The driver does not know if
there is a protocol to manage getBuffersWithFormat(). It's up-to the
loader to expose the vfunc if there is one. (Kristian)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Remove a few gratious blank lines and use the correct level of
indentation.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
The latter already does it for us.
As we're here annotate the masks as const and use unsigned for the
index(es).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Earlier commit introduced support for image_loader and left the
dri2_loader code dangling/unused. Let's remove it.
Fixes: 63c5d5c6c4 ("Added pbuffer hooks for surfaceless platform")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The extension stored in struct dri2_egl_display isn't used, thus we can
create a static const instance of the extension and point extensions[]
to it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Fold duplicate conditional blocks and add a few extra comments ;-)
v2: Bring back the explicit "unbind" logic (Eric), remove NULL derefs.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The indirection is meant to be used by the core EGL implementation in
main. Not in the drivers themselves.
Move the dri2_destroy_surface definition to avoid forward declaration of
the static function.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This way the only places that reference DriverData are the ones that
manipulate it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Currently all callers are careful enough not to do that, yet that will
not be the case in the future.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
All the platforms are duplicating what should be a driver/dri2 thing -
refcounting. Just fold it accordingly.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
For a while now we require shared glapi for EGL, thus we can drop a
few bits from the olden days. Namely - dlopen(NULL...) is not possible,
error out at build stage if so and drop the guard around dlclose().
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
The documentation is clear - one must glFlush the old context on
eglMakeCurrent. Thus keeping it optional is not something we should be
doing. Furthermore if we cannot get the entry point we're likely having
a broken setup/stack.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
EGL_KHR_swap_buffers_with_damage is actually already supported, as it is
technically nothing but a rename of EGL_EXT_swap_buffers_with_damage.
To that effect, both extension are advertised depending on the same
condition, and the new entrypoint simply redirects to the previous one.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Pre-patch, there were two code paths for parsing EGLSync attribute
lists: one path for old-style EGLint lists, used by eglCreateSyncKHR,
and another for new-style EGLAttrib lists, used by eglCreateSync (1.5)
and eglCreateSync64 (EGL_KHR_cl_event2).
There were two attrib_list parsing functions,
_eglParseSyncAttribList(_EGLSync *sync, const EGLint *attrib_list)
_eglParseSyncAttribList64(_EGLSync *sync, const EGLattrib *attrib_list)
This patch unifies the two attrib_list parsing functions into one,
_eglParseSyncAttribList(_EGLSync *sync, const EGLattrib *attrib_list)
Many internal EGLSync function signatures had *two* attrib_list
parameters to accomodate both code paths: one parameter was an EGLint
list and other an EGLAttrib list. At most one of the parameters was
allowed to be non-null. This patch removes the `EGLint *attrib_list`
parameter, leaving only the `EGLAttrib *attrib_list` parameter, for all
internal EGLSync functions.
v2:
- Consistently use condition (sizeof(int_list[0]) ==
sizeof(attrib_list[0])). [for emil]
v3:
- Don't double-unlock the display in eglCreateSyncKHR.
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v2)
This allows querying the current active screen from the
loader's common code.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Wire up the debug entrypoints to EGL dispatch, and add the extension
string to the client extension list.
v2:
- Lots of style fixes
- Fix missing EGLAPIENTRYs
- Factor out valid attribute check
- Lock display in eglLabelObjectKHR as needed, and use RETURN_EGL_*
- Move "EGL_KHR_debug" into asciibetical order in client extension
string
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.veliko@collabora.com>
