This was already been done to gen7 platforms, so now extending to all
platforms without has_64bit_int.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18577>
Move subgroup_id, that's only used by CS for verx10 < 125, as part of
the payload too -- even though is not, strictly speaking.
Note the thread execution of Task/Mesh is similar enough, so we make
their common struct inherit from cs_thread_payload.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18176>
Allow us to implement this in brw_fs_visitor.cpp, which then will
let us deduplicate code between the CS-like barrier and the TCS
barrier in a later patch.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18362>
When loading a TCS or GS input, we generate some code to read the URB
handle for a particular input control point (ICP handle), which often
involves indirect addressing due to a non-constant vertex.
For example:
mov(8) vgrf148+0.0:UW, 76543210V
shl(8) vgrf149:UD, vgrf148+0.0:UW, 2u
shl(8) vgrf150:UD, vgrf145:UD, 5u
add(8) vgrf151:UD, vgrf150:UD, vgrf149:UD
mov_indirect(8) vgrf147:UD, g2:UD, vgrf151:UD, 96u
Unfortunately, the first load with 76543210V is considered a partial
write because the 8 channels of 16-bit UW data doesn't fill an entire
register, and we can't allocate VGRFs at sub-register granularity.
This causes none of the above math to be CSE'd, even though the first
two instructions are common to *all* input loads, and the rest may be
reused sometimes as well.
To work around this, we stop emitting 76543210V to a temporary, and
instead use nir_system_values[SYSTEM_VALUE_SUBGROUP_INVOCATION], which
already contains this value, and is unconditionally set up for us.
With all input loads using the same register for the sequence, our
CSE pass is able to eliminate the rest of the common math.
shader-db results on Tigerlake:
total instructions in shared programs: 20748243 -> 20744844 (-0.02%)
instructions in affected programs: 73410 -> 70011 (-4.63%)
helped: 242 / HURT: 21
helped stats (abs) min: 1 max: 37 x̄: 14.17 x̃: 15
helped stats (rel) min: 0.17% max: 19.58% x̄: 6.13% x̃: 6.32%
HURT stats (abs) min: 1 max: 4 x̄: 1.38 x̃: 1
HURT stats (rel) min: 0.18% max: 1.31% x̄: 0.58% x̃: 0.58%
95% mean confidence interval for instructions value: -13.73 -12.12
95% mean confidence interval for instructions %-change: -6.00% -5.19%
Instructions are helped.
total cycles in shared programs: 785828951 -> 785788480 (<.01%)
cycles in affected programs: 597593 -> 557122 (-6.77%)
helped: 227 / HURT: 13
helped stats (abs) min: 6 max: 624 x̄: 182.19 x̃: 185
helped stats (rel) min: 0.24% max: 18.22% x̄: 7.85% x̃: 7.80%
HURT stats (abs) min: 2 max: 153 x̄: 68.08 x̃: 36
HURT stats (rel) min: 0.03% max: 7.79% x̄: 2.97% x̃: 1.25%
95% mean confidence interval for cycles value: -182.55 -154.71
95% mean confidence interval for cycles %-change: -7.84% -6.69%
Cycles are helped.
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18455>
Make it clearer we are dealing with multiple patches,
works better in constrast with SINGLE_PATCH.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18151>
We did not handle the operation with data size < 4. It works fine on
all other messages (global/shared). The initial commit was just too
restrictive.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 1e242785c3 ("intel/fs: Implement load/store_scratch on XeHP")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16964>
The selection of the internal opcode to deal with load_scratch is
incorrect.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: c643979228 ("intel/fs: Choose memory message type based on bit size")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16964>
This backend lowering code has been dead since the removal of i965 -
nothing in the current source tree ever sets the flag.
This is handled by iris_setup_uniforms() and crocus_setup_uniforms().
Variable group size does not appear to be a feature in anv.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18055>
In the early days of NIR, you had to prod at inst->const_index[]
directly, but a long while back, we added handy accessor functions
that let you use the actual name of the thing you want instead of
memorizing the exact order of parameters.
Also rewrite a comment I had a hard time parsing.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18067>
Found by code inspection.
There's an assert later checking that we haven't overflown
this array, so this change probably doesn't matter for any
workload.
Cc: 22.1 <mesa-stable>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16665>
No shader-db changes on any Intel platform
Fossil-db results:
Tiger Lake
Instructions in all programs: 156926440 -> 156926470 (+0.0%)
Instructions hurt: 15
Cycles in all programs: 7513099349 -> 7513099402 (+0.0%)
Cycles hurt: 15
Ice Lake and Skylake had similar results. (Ice Lake shown)
Cycles in all programs: 9099036492 -> 9099036489 (-0.0%)
Cycles helped: 1
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17605>
The changes to fs_visitor::validate() helped track down a place where I
initially forgot to convert a message to the new sources layout. This
had caused a different validation failure in
dEQP-GLES31.functional.tessellation.tesscoord.triangles_equal_spacing,
but this were not detected until after SENDs were lowered.
Tiger Lake, Ice Lake, and Skylake had similar results. (Ice Lake shown)
total instructions in shared programs: 19951145 -> 19951133 (<.01%)
instructions in affected programs: 2429 -> 2417 (-0.49%)
helped: 8 / HURT: 0
total cycles in shared programs: 858904152 -> 858862331 (<.01%)
cycles in affected programs: 5702652 -> 5660831 (-0.73%)
helped: 2138 / HURT: 1255
Broadwell
total cycles in shared programs: 904869459 -> 904835501 (<.01%)
cycles in affected programs: 7686744 -> 7652786 (-0.44%)
helped: 2861 / HURT: 2050
Tiger Lake, Ice Lake, and Skylake had similar results. (Ice Lake shown)
Instructions in all programs: 141442369 -> 141442032 (-0.0%)
Instructions helped: 337
Cycles in all programs: 9099270231 -> 9099036492 (-0.0%)
Cycles helped: 40661
Cycles hurt: 28606
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17605>
[anholt: changed to make all drivers do the right thing by moving the
payload barycentric check into the compiler]
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17381>
The lowering is currently fake. It just changes the opcode from the
_LOGICAL version to the non-_LOGICAL version.
v2: Remove some rebase cruft. 's/gfx8_//;s/simd8_/' in
brw_instruction_name. Both suggested by Ken.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17379>
With stages dispatching with a mask, we can run into situations where
we don't have the global address in all lanes. The existing code
always assumed we had the addres in at least lane0.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: bb40e999d1 ("intel/nir: use a single intel intrinsic to deal with ray traversal")
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17330>
The thread dispatch SEND instructions will dispatch new threads
immediately even before the caller of the SEND instruction has reached
EOT. So we really need to make sure all the memory writes are visible
to other threads within the DSS before the SEND.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15755>
This fixes many tests in following groups on DG2:
dEQP-VK.memory_model.*
dEQP-VK.fragment_shader_interlock.*
v2: use memory scope and setup descriptor also
for barriers without defined scope (Curro),
use local scope and flush type none with
NIR_SCOPE_NONE scope, cleanups (Lionel)
v3: use LSC_FENCE_THREADGROUP for NIR_SCOPE_WORKGROUP,
remove default case (Curro), use eviction if scope
was not defined, use LSC_FENCE_GPU scope for vertex
stage
v4: use LSC_FENCE_TILE independent of stage for device
scope (Curro)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15743>
Originally, we had virtual opcodes for scratch access, and let the
generator count spills/fills separately from other sends. Later, we
started using the generic SHADER_OPCODE_SEND for spills/fills on some
generations of hardware, and simply detected stateless messages there.
But then we started using stateless messages for other things:
- anv uses stateless messages for the buffer device address feature.
- nir_opt_large_constants generates stateless messages.
- XeHP curbe setup can generate stateless messages.
So counting stateless messages is not accurate. Instead, we move the
spill/fill accounting to the register allocator, as it generates such
things, as well as the load/store_scratch intrinsic handling, as those
are basically spill/fills, just at a higher level.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16691>
Fixes a hang on Gfx9 GT1 : dEQP-VK.compute.zero_initialize_workgroup_memory.max_workgroup_memory.128
Tested-by: Mark Janes <markjanes@swizzler.org>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15596>
We haven't exposed this intrinsic as it doesn't directly correspond to
anything in SPIR-V. However, it's used internally by some NIR passes,
namely nir_opt_uniform_atomics().
We reuse most of the infrastructure in brw_find_live_channel, but with
LZD/ADD instead of FBL. A new SHADER_OPCODE_FIND_LAST_LIVE_CHANNEL is
like SHADER_OPCODE_FIND_LIVE_CHANNEL but from the other side.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15484>
Use emit_predicate_on_sample_mask() helper that does check where to
get the correct mask depending on whether discard/demote was used or
not.
Fixes: 45f5db5a84 ("intel/fs: Implement "demote to helper invocation"")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15400>
As this function doesn't check for any control-flow
dependence, it only returns true for statically
(or globally) uniform values.
The same holds true for is_binding_dynamically_uniform()
in nir_opt_gcm().
Rename to better reflect that property.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14994>
Most of the time, this doesn't matter. On the versions with _sat, if
the destination type is incorrect, the clamping will not happen
correctly.
Fixes the following CTS tests:
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_packed_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_packed_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_packed_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_packed_uu_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.all_uu_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_packed_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_packed_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_packed_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_packed_uu_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.limits_uu_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_packed_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_packed_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_packed_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_packed_uu_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_ss_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_su_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_us_v4i8_out32
dEQP-VK.spirv_assembly.instruction.compute.opudotaccsatkhr.small_uu_v4i8_out32
v2: Update anv-tgl-fails.txt.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Fixes: 0f809dbf40 ("intel/compiler: Basic support for DP4A instruction")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15417>
We'll use this to apply ray tracing operations in our trivial return
shader based on the stage we're in.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13719>
In the future we'll want to reuse this intrinsic to deal with ray
queries. Ray queries will use a different global pointer and
programmatically change the control/level arguments of the trace send
instruction.
v2: Comment on barrier after sync trace instruction (Caio)
Generalize lsc helper (Caio)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13719>
