This patch removes start_slot from set_vertex_buffers() as suggested in
https://gitlab.freedesktop.org/mesa/mesa/-/issues/8142
compilation testing:
all gallium drivers, nine frontend compilation has been tested.
d3d10umd compilation has not been tested
driver, frontend testing:
only llvmpipe and radeonsi driver was tested running game
only the nine frontend changes are complex. All other changes are easy.
nine front end was using start slot and also using multi context.
nine frontend code changes:
In update_vertex_elements() and update_vertex_buffers(), the vertex
buffers or streams are ordered removing the holes. In update_vertex_elements()
the vertex_buffer_index is updated for pipe driver to match the ordered list.
v2: remove start_slot usage code from Marek (Marek Olšák)
v3: nine stream number holes mask code from Axel (Axel Davy)
Reviewed-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com> (except nine, which is Ab)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22436>
In order to get rid of the ntracediff.sh wrapper script, implement
invocation of 'less' internally, if the stdout is determined to
be a tty. Otherwise just print out normally.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
Instead of discarding them at parsing phase, let the difflib
SequenceMatcher always ignore them, and optionally suppress
them from output if -I/--ignore-junk option is given.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
Basically implement the last item on the original feature request list of #4609.
Example: ./pytracediff.py good.xml bad.xml -NM
Or suppress common calls completely via -C, e.g. -NC etc.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
Highlight differing _lines_ in the differing blocks, with somewhat
different ANSI colors.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
The limitations of current approach for Gallium trace diffing via
'tracediff.sh' are becoming all too apparent, as we are first dumping
both trace to text and performing plain line-based sdiff on them.
This obviously loses the context of calls and sometimes results in
confusing diffs when subsequent calls are similar enough. It also
prevents us from formatting the diff output in ways that would
benefit readability.
In attempt to rectify the situation, reimplement the diffing completely
in Python, using difflib and adding the necessary plumbing into the trace
model objects etc.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
Previously tracediff.sh used postprocessing sed-script to remove unwanted
calls from the dump output. Instead of that, add option to parse.py to
ignore a list of calls at parsing phase. Currently this list is hardcoded
in parse.py.
Also clean up the trace model code and pointer tracking a bit to avoid
static state in Pointer class.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17135>
Not all options in the options object are set by all tools.
Instead of using argparse result objects directly, use separate
with default settings and copy relevant attributes there.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17108>
Extend the special handling of return types to also include pointer
type array list elements, so we ignore the initial "name" of the
element until we know a better type for them. This improves the type
"detection" of such pointer array elements when parsing the logs
with dump.py / tracediff.sh
Related to Mesa issue #4609
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11492>
In our simplistic model of assigning types to pointer, we treat
return values specially because their "type" can't be known
easily before their first use. Improve the "ret" handling by
removing one from their count when we reassign the type to
something else.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
As per the suggestion in #4609, implement mode/option -M/--method-only
which only prints call method names, for quick overview of what is
happening in the trace. The same option can be used with both
dump.py and tracediff.sh.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Implement better argument parsing/handling in tracediff.sh
so that the options passed to dump.py and sdiff are not required
to be positional.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Enabling --left-column option for sdiff inside tracediff.sh we
get output that only shows the differing lines on the right column.
This, when used with the -N/--named option should make many
trace diffs more understandable.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
As suggested by zmike in issue #4609, raw pointer values in
are problematic for diffing state dumps. In attempt to remedy
this, we implement an option --named/-N in dump.py that
generates symbolic names for all pointers based on the context.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Previously some variants (such as execution time and call number
were suppressed in tracediff.sh via a sed script. It makes sense
to implement an option to leave out such variants to begin with
in dump.py, so let's do so and use it.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Previously we inherited some options from parse.py, but
that made no sense for some of the options that are not
needed for dump_state.py (such as --plain, as we output
only JSON format text.)
So, remove the inherit and implement filename argument
here independantly.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Clean up tracediff.sh shellscript slightly, partially in preparation
for upcoming changes. Also add a signal handler for removing the
created temporary directory and files if we are interrupted.
Also, use the new --plain option of dump.py to suppress output
of ANSI color/formatting codes, so we do not have to post-filter
them later.
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10648>
Bring the scripts for parsing, dumping state and diffing of Gallium
trace files to modern day by updating them to Python 3.
Add option '-p' to some tools for outputting only plaintext
instead of ANSI / colorized format.
Also fix state parsing of some dumps by adding 'clear_render_target'
and 'get_disk_shader_cache' to ignored calls list.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4321
Signed-off-by: Matti Hamalainen <ccr@tnsp.org>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9830>
These are python2 scripts and the generic "python" may point to
python3.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
It is not guaranteed to be in /bin
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
D3D10 allows setting of the internal offset of a buffer, which is
in general only incremented via actual stream output writes. By
allowing setting of the internal offset draw_auto is capable
of rendering from buffers which have not been actually streamed
out to. Our interface didn't allow. This change functionally
shouldn't make any difference to OpenGL where instead of an
append_bitmask you just get a real array where -1 means append
(like in D3D) and 0 means do not append.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tungsten Graphics Inc. was acquired by VMware Inc. in 2008. Leaving the
old copyright name is creating unnecessary confusion, hence this change.
This was the sed script I used:
$ cat tg2vmw.sed
# Run as:
#
# git reset --hard HEAD && find include scons src -type f -not -name 'sed*' -print0 | xargs -0 sed -i -f tg2vmw.sed
#
# Rename copyrights
s/Tungsten Gra\(ph\|hp\)ics,\? [iI]nc\.\?\(, Cedar Park\)\?\(, Austin\)\?\(, \(Texas\|TX\)\)\?\.\?/VMware, Inc./g
/Copyright/s/Tungsten Graphics\(,\? [iI]nc\.\)\?\(, Cedar Park\)\?\(, Austin\)\?\(, \(Texas\|TX\)\)\?\.\?/VMware, Inc./
s/TUNGSTEN GRAPHICS/VMWARE/g
# Rename emails
s/alanh@tungstengraphics.com/alanh@vmware.com/
s/jens@tungstengraphics.com/jowen@vmware.com/g
s/jrfonseca-at-tungstengraphics-dot-com/jfonseca-at-vmware-dot-com/
s/jrfonseca\?@tungstengraphics.com/jfonseca@vmware.com/g
s/keithw\?@tungstengraphics.com/keithw@vmware.com/g
s/michel@tungstengraphics.com/daenzer@vmware.com/g
s/thomas-at-tungstengraphics-dot-com/thellstom-at-vmware-dot-com/
s/zack@tungstengraphics.com/zackr@vmware.com/
# Remove dead links
s@Tungsten Graphics (http://www.tungstengraphics.com)@Tungsten Graphics@g
# C string src/gallium/state_trackers/vega/api_misc.c
s/"Tungsten Graphics, Inc"/"VMware, Inc"/
Reviewed-by: Brian Paul <brianp@vmware.com>
The new function replaces four old functions: set_fragment/vertex/
geometry/compute_sampler_views().
Note: at this time, it's expected that the 'start' parameter will
always be zero.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Based from the code from the good old python state tracker.
Extremely handy to diagnose regressions in state trackers.
Reviewed-by: Brian Paul <brianp@vmware.com>
Because:
- bindings are not fully automatic, and they are broken most of the time
- unit tests/samples can be written in C on top of graw
- tracing/retracing is more useful at API levels with stable ABIs such as
GL, producing traces that cover more layers of the driver stack and and
can be used for regression testing
