For some reason, the any/all predicates don't work properly with SIMD32.
In particular, it appears that a SEL with a QtrCtrl of 2H doesn't read
the correct subset of the flag register and you end up getting garbage
in the second half. Work around this by using a pair of 1-wide MOVs and
scattering the result. This fixes the any/all instructions for SIMD32.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
The any/all intrinsics return a boolean value so D or UD is the correct
type. Unfortunately, get_nir_dest has the annoying behavior of
returnning a float type by default. This causes format conversion which
gives us -1.0f or 0.0f in the register. If the consumer of the result
does an integer comparison to zero, it will give you the right boolean
value but if we do something more clever based on the 0/~0 assumption
for booleans, this will give the wrong value.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
In fragment shaders f0.1 is used for discards so doing ballot after a
discard can potentially cause the discard to not happen. However, we
don't support SIMD32 fragment shaders yet so this isn't a problem.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
We have ANY/ALL32 predicates and, for the most part, they work just
fine. (See the next commit for more details.) Also, due to the way
that flag registers are handled in hardware, instruction splitting is
able to split the CMP correctly. Specifically, that hardware looks at
the execution group and knows to shift it's flag usage up correctly so a
2H instruction will write to f0.1 instead of f0.0.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Returns the brw_type for a given ssa.bit_size, and a reference type.
So if bit_size is 64, and the reference type is BRW_REGISTER_TYPE_F,
it returns BRW_REGISTER_TYPE_DF. The same applies if bit_size is 32
and reference type is BRW_REGISTER_TYPE_HF it returns BRW_REGISTER_TYPE_F
v2 (Jason Ekstrand):
- Use better unreachable() messages
- Add Q types
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It is already done in NIR.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
ARB_enhanced_layouts allows multiple output variables to share the same
location - and these variables may not have the same sizes. For
example, consider these output variables:
// consume X/Y/Z components of 6 vectors
layout(location = 0) out vec3 a[6];
// consumes W component of the first vector
layout(location = 0, component = 3) out float b;
Looking at the first declaration, we see that VARYING_SLOT_VAR0 needs 24
components worth of space (vec3 padded out to a vec4, 4 * 6 = 24). But
looking at the second declaration, we would think that VARYING_SLOT_VAR0
needs only 4 components of space (a single float padded out to a vec4).
nir_setup_outputs() only considered the space requirements of the first
declaration it happened to see, so if 'float b' came first, it would
underallocate the output register space, causing brw_fs_validator.cpp
to assert fail about inst->dst.offset exceeding the register size.
Fixes Piglit's tests/spec/arb_enhanced_layouts/execution/component-layout/
vs-to-fs-array-interleave-single-location.shader_test.
Thanks to Tim Arceri for finding this bug and writing a test!
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When computing the total size of the URB for tessellation evaluation
inputs we were not accounting for this, and instead we were always
assuming that each input would take a single vec4 slot, which could
lead to computing a smaller read size than required. Specifically, this
is a problem when the last input is a dvec3/4 such that its XY components
are stored in the the second half of a payload register (which can happen
if the offset for the input in the URB is not 64-bit aligned because
there are 32-bit inputs mixed in) and the ZW components in the
first half of the next, as in this case we would fail to account for the
extra slot required for the ZW components.
Fixes (requires another fix in CTS currently in review):
KHR-GL45.enhanced_layouts.varying_locations
KHR-GL45.enhanced_layouts.varying_array_locations
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
... without the float -> double conversion. Low power parts have
additional restrictions when it comes to operating on 64-bit types, and
the instruction used to do the conversion violates one of them:
specifically, the restriction that "Source and Destination horizontal
stride must be aligned to the same qword".
Previously we generated a float and then converted, but we can avoid the
conversion by using the same extract-the-sign-bit + or-in-1.0 algorithm
by directly operating on the high four bytes of each double-precision
component in the result.
In SIMD8 and SIMD16 this cuts one instruction from the implementation,
and more importantly that instruction is the one which violated the
regioning restriction.
Along the way I removed some comments that I did not think helped, and
some code about double comparisons which does not seem to be necessary
today.
This prevents validation failures caught by the new EU validation code
added in later patches.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
64-bit operations on Atom parts have additional restrictions over their
big-core counterparts (validated by later patches).
Specifically, the restriction that "Source and Destination horizontal
stride must be aligned to the same qword" is violated by most shift
operations since NIR uses a 32-bit value as the shift count argument,
and this causes instructions like
shl(8) g19<1>Q g5<4,4,1>Q g23<4,4,1>UD
where src1 has a 32-bit stride, but the dest and src0 have a 64-bit
stride.
This caused ~4 pixels in the ARB_shader_ballot piglit test
fs-readInvocation-uint.shader_test to be incorrect. Unfortunately no
ARB_gpu_shader_int64 test hit this case because they operate on
uniforms, and their scalar regions are an exception to the restriction.
We work around this by effectively unpacking the shift count, so that we
can read it with a 64-bit stride in the shift instruction. Unfortunately
the unpack (a MOV with a dst stride of 2) is a partial write, and cannot
be copy-propagated or CSE'd.
Bugzilla: https://bugs.freedesktop.org/101984
Triggering the push model when 64-bit inputs are involved is not easy due to
the constrains on the maximum number of registers that we allow for this mode,
however, for GS with 'points' primitive type and just a couple of double
varyings we can trigger this and it just doesn't work because the
implementation is not 64-bit aware at all. For now, let's make sure that we
don't attempt this model whith 64-bit inputs and we always fall back to pull
model for them.
Also, don't enable the VUE handles in the thread payload on the fly when we
find an input for which we need the pull model, this is not safe: if we need
to resort to the pull model we need to account for that when we setup the
thread payload so we compute the first non-payload register properly. If we
didn't do that correctly and we enable it on-the-fly here then we will end up
VUE handles on the first non-payload register which will probably lead to
GPU hangs. Instead, always enable the VUE handles for the pull model so we
can safely use them when needed. The GS is going to resort to pull model
almost in every situation anyway, so this shouldn't make a significant
difference and it makes things easier and safer.
v2: Always enable the VUE handles for pull model, this is easier and safer
and the GS is going to fallback to pull model almost always anyway (Ken)
v3: Only clamp the URB read length if we are over the maximum reserved for
push inputs as we were doing in the original code (Ken).
v4: No need to clamp the urb read length if invocations > 1
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We already had a channel_num system value, which I'm renaming to
subgroup_invocation to match the rest of the new system values.
Note that while ballotARB(true) will return zeros in the high 32-bits on
systems where gl_SubGroupSizeARB <= 32, the gl_SubGroup??MaskARB
variables do not consider whether channels are enabled. See issue (1) of
ARB_shader_ballot.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This actually takes advantage of the newly pushed UBO data, avoiding
pull loads.
Improves performance in GLBenchmark Manhattan 3.1 by:
HSW: ~1%, BDW/SKL/KBL GT2: 3-4%, SKL GT4: 7-8%, APL: 4-5%.
(thanks to Eero Tamminen for these numbers)
shader-db results on Skylake, ignoring programs with spill/fill changes:
total instructions in shared programs: 13963994 -> 13651893 (-2.24%)
instructions in affected programs: 4250328 -> 3938227 (-7.34%)
helped: 28527
HURT: 0
total cycles in shared programs: 179808608 -> 172535170 (-4.05%)
cycles in affected programs: 79720410 -> 72446972 (-9.12%)
helped: 26951
HURT: 1248
LOST: 46
GAINED: 21
Many "Deus Ex: Mankind Divided" shaders which already spilled end up
spill a lot more (about 240 programs hurt, 9 helped). The cycle
estimator suggests this is still overall a win (-0.23% in cycle counts)
presumably because we trade pull loads for fills.
v2: Drop "PULL" environment variable left in for initial debugging
(caught by Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
In 5f2fe9302c is_geminilake was introduced for the differenciate
broxton from geminilake. Unfortunately I failed as verifying that
is_broxton is throughout the code base to mean Gen9lp.
Fixes: 5f2fe9302c ("intel: common: add flag to identify platforms by name")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NIR calls these system values but they come in from the VF unit as
vertex data. It's terribly convenient to just be able to treat them as
such in the back-end.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The vec4 backend will want to count in units of vec4s, not scalar
components. The simplest solution is to move the multiplication by 4
into the scalar backend. This also improves consistency with how we
count varyings.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We already provide a default LOD for textureQueryLevels and texture() on
non-fragment stages. However, there are more cases where one is needed
such as textureSize(gsampler2DMS*) in SPIR-V. Instead of trying to list
out all of the cases one at a time, just provide the default for all TXS
and TXL operations. This fixes a shader validation error in the new
Sascha deferredmultisampling demo which uses textureSize(gsampler2DMS).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100391
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
The NIR story on conversion opcodes is a mess. We've had way too many
of them, naming is inconsistent, and which ones have explicit sizes was
sort-of random. This commit re-organizes things and makes them all
consistent:
- All non-bool conversion opcodes now have the explicit size in the
destination and are named <src_type>2<dst_type><size>.
- Integer <-> integer conversion opcodes now only come in i2i and u2u
forms (i2u and u2i have been removed) since the only difference
between the different integer conversions is whether or not they
sign-extend when up-converting.
- Boolean conversion opcodes all have the explicit size on the bool and
are named <src_type>2<dst_type>.
Making things consistent also allows nir_type_conversion_op to be moved
to nir_opcodes.c and auto-generated using mako. This will make adding
int8, int16, and float16 versions much easier when the time comes.
Reviewed-by: Eric Anholt <eric@anholt.net>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
