Dumb buffers do not work with the asahi kernel driver. So use asahi ioctl to create
proper buffers.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31169>
The extension only affects non semantic instructions that need no
handling in the backend compiler.
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30791>
As sampler view can be used multiple times, do not attempt to rebind if
it was already bound.
This fixes a crash when replaying half-life-2-v2.trace.
Backport-to: 24.2
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31049>
This reverts commit 0b85476d86.
When mapping a BO in v3d, the map keeps forever until freeing the BO. If
later the map is required again, we reuse the map instead of doing the
map from scratch.
This saves calling map/unmap continuously, as well as a mechanism to
keep control of the map usage, like a reference count.
Thus, when reallocating a BO, if it is mapped it just means the map was
used in the past, but not necessarily it is in use right now.
The reverted commit was causing performance regressions in multiple
applications, reducing from 60fps to 5fps.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11783
Backport-to: 24.2
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31049>
Zink currently requires VK_EXT_queue_family_foreign to set
PIPE_CAP_DMABUF, which is one of the requirements to create a
gbm context.
v3dv already conditionally supported this extension for Android.
As it is now required for Zink in Mesa, move it to the driver's
common set.
This allows v3dv to create gbm contexts with Zink again since
this was made a stricter requirement as a side effect of
ab08b79ef7 ("gbm: use driver check for dmabuf export").
Tested with Zink on a gbm EGL application as well as sway with
the wlroots Vulkan backend, which also requires this extension.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30938>
Instead of checking on run time if simulator is available or not, do it
at build time.
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30900>
v3d_resource_from_handle when importing a DRM_FORMAT_MOD_INVALID
considered that if we had a render-only device the resource layout was
linear and if we didn't have render-only the resource layout was tiled.
This change honors the resource creation with the SCANOUT flag
independently of the availability of the render-only for the
DRM_FORMAT_MOD_INVALID modifier.
It also fixes most of the failing piglit text for:
spec@ext_image_dma_buf_import@ext_image_dma_buf_import.*
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/11594
Cc: mesa-stable
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30946>
It was set to 170min, which made sense when the job timeout was 3h, but
then 4bb564f40d ("broadcom/ci: add more jobs to test with rpi5")
lowered the job timeout to 2h without lowering the test timeout to match.
Fixes: 4bb564f40d ("broadcom/ci: add more jobs to test with rpi5")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30800>
Adds a new instruction type that stores metadata that might be useful
for debugging purposes. Passes must ignore these instructions when
making decisions.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18903>
Create new stages called broadcom-postmerge and freedreno-postmerge, and
move the full and manual jobs over there, to avoid entanglement with the
pre-merge jobs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30784>
The CI-wide default is 20min, so if we set a 20min job timeout here, we
can't get the results of our jobs when they timeout.
Instead of setting the test timeout to 15min, which would be too short
for some jobs, leave it at 20min (but be explicit about it and protect
against a future change of that default), and bump the job timeout by
5min to allow for results to be uploaded.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30694>
This enables some algebraic optimizations.
No changes in shader-db, but it does cause some CTS tests to
produce less instructions.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30614>
ir3's lowering of variables to scratch memory has to treat 8-bit values as
16-bit ones when comparing such value's size against the given threshold
since those values are handled through 16-bit half-registers. But those
values can still use natural 8-bit size and alignment for storing inside
scratch memory.
nir_lower_vars_to_scratch now accepts two size-and-alignment functions,
one used for calculating the variable size and the other for calculating
the size and alignment needed for storing inside scratch memory. Non-ir3
uses of this pass can just duplicate the currently-used function. ir3
provides a separate variable-size function that special-cases 8-bit types.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29875>
We usually emit flags right before consuming them but this is
suboptimal from the point of view of register pressure: if an
instruction is only used to generate flags then waiting to emit
it right before reading the flags extends the liveness of the
sources used to generate the flags for no gain. This pass will
check for such instructions and try to move them as early as
possible.
Shader-db results below show this is effective to reduce register
pressure, allowing a few shaders to increase thread counts and/or
reduce spilling:
total instructions in shared programs: 11057173 -> 11057076 (<.01%)
instructions in affected programs: 1955543 -> 1955446 (<.01%)
helped: 4214
HURT: 3905
Inconclusive result (value mean confidence interval includes 0).
total threads in shared programs: 425096 -> 425170 (0.02%)
threads in affected programs: 74 -> 148 (100.00%)
helped: 37
HURT: 0
Threads are helped.
total uniforms in shared programs: 3846275 -> 3845674 (-0.02%)
uniforms in affected programs: 23574 -> 22973 (-2.55%)
helped: 217
HURT: 30
Uniforms are helped.
total max-temps in shared programs: 2222910 -> 2220488 (-0.11%)
max-temps in affected programs: 61904 -> 59482 (-3.91%)
helped: 2145
HURT: 113
Max-temps are helped.
total spills in shared programs: 4294 -> 4280 (-0.33%)
spills in affected programs: 148 -> 134 (-9.46%)
helped: 8
HURT: 0
total fills in shared programs: 6497 -> 6468 (-0.45%)
fills in affected programs: 291 -> 262 (-9.97%)
helped: 8
HURT: 0
total sfu-stalls in shared programs: 14344 -> 14611 (1.86%)
sfu-stalls in affected programs: 1308 -> 1575 (20.41%)
helped: 217
HURT: 335
Inconclusive result (%-change mean confidence interval includes 0).
total inst-and-stalls in shared programs: 11071517 -> 11071687 (<.01%)
inst-and-stalls in affected programs: 1946767 -> 1946937 (<.01%)
helped: 4191
HURT: 3909
Inconclusive result (value mean confidence interval includes 0).
total nops in shared programs: 270628 -> 269829 (-0.30%)
nops in affected programs: 22032 -> 21233 (-3.63%)
helped: 1213
HURT: 571
Inconclusive result (%-change mean confidence interval includes 0).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30511>
Fixes the following test, as far as you enable Vulkan 1.3 (if not it
is skipped):
dEQP-VK.api.info.vulkan1p3_limits_validation.max_inline_uniform_total_size
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/29476>
5 minutes is too long and doesn't leave enough time after the retry to
still complete the job, especially if two boots fail in a row, removing
10 out of the worst-case 20 minutes allowed.
90 seconds is more than enough, the boot output normally starts after
~40-45 seconds.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30409>
Now that there are more rpi5 devices in the CI, run all the GL/GLES
tests and CL tests nightly.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30349>
This runs part of GL and Vulkan tests in vc4/v3d/v3dv with the address
sanitizer enabled to detect memory issues and leaks.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30349>
