For GLES sRGB framebuffer attachemnt support is provided in two steps:
sRGB attachments like described in EXT_sRGB (and GLES 3.0) that enable
linear to sRGB color space transformation automatically, and the ability
to switch formats of the render target surface between sRGB and linear
that introduces full support for EXT_framebuffer_sRGB.
Set the according flags to reflect these two levels of sRGB support.
As a difference between desktopm GL and GLES, on desktop GL for a sRGB
framebuffer attachment the linear-sRGB conversion is turned off by default,
and for GLES it is turned on. This needs to be taken into account when
initally creating a surface, i.e. on desktop GL creation of a sRGB surface
is preferred, but on GLES sRGB surfaces are only created when explicitely
requested.
v2: - Use the new CAPS name
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
EXT_sRGB is an (incomplete) GLES extension that provides support for sRGB
framebuffer attachments, hence it can be used to check for this support
as an alternative to EXT_framebuffer_sRGB that provies the same
functionality but also sRGB write control support.
However, since EXT_sRGB is incomplete and superseted by GLES 3.0 it will
not be exposed as an extension.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v2: - Use the renamed CAPS
- add assetions to make sure that mesa doesn't try to switch
destination surface formats when it is not supported. (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Add a new cap that indicates whether the drivers supports
enabling/disabling the conversion from linear space to sRGB
for a framebuffer attachment. In Driver terms that this CAP indicates
whether the driver can switcht between a linear and and a sRGB surface
format for draw destinations witout changing the sourface itself.
v2: rename CAP to DEST_SURFACE_SRGB_CONTROL to reflect its
purpouse better (pointed out by Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Under Vulkan, the double vertex attributes take up the same size
regardless of whether they are vertex inputs or any other stage
interface.
Under OpenGL (ARB_gl_spirv), from GLSL 4.60 spec, section 4.3.9
Interface Blocks:
"It is a compile-time error to have an input block in a vertex
shader or an output block in a fragment shader. These uses are
reserved for future use."
So we also don't need to check if it is an vertex input or not, and
use false in any case.
v2: (changes made by Alejandro Piñeiro)
* Update required after "spirv: Handle location decorations on
block interface members" own updates (original patch was sent
several months ago)
* After Neil suggesting it, confirm that this change can be also
done for OpenGL (ARB_gl_spirv). Expand commit message.
v3: update after changing name of main method on a previous patch
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
glsl_count_attribute_slots takes a parameter to specify whether the
type is being used as a vertex input because on GL double attributes
only take up one slot. Vulkan doesn’t make this distinction so this
patch renames the argument to is_gl_vertex_input in order to make it
more clear that it should always be false on Vulkan.
v2: minor variable renaming (s/member/member_type) (Tapani)
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Previously the code was taking any location decoration on the block
and using that to calculate the member locations for all of the
members. I think this was assuming that there would only be one
location decoration for the entire block. According to the Vulkan spec
it is possible to add location decorations to individual members:
“If the structure type is a Block but without a Location, then each
of its members must have a Location decoration. If it is a Block
with a Location decoration, then its members are assigned
consecutive locations in declaration order, starting from the
first member which is initially the Block. Any member with its own
Location decoration is assigned that location. Each remaining
member is assigned the location after the immediately preceding
member in declaration order.”
This patch makes it instead keep track of which members have been
assigned an explicit location. It also has a space to store the
location for the struct as a whole. Once all the decorations have been
processed it iterates over each member to fill in the missing
locations using the rules described above.
So, this commit is needed to get working a case like this, on both
Vulkan and OpenGL using SPIR-V (ARB_gl_spirv):
out block {
layout(location = 2) vec4 c;
layout(location = 3) vec4 d;
layout(location = 0) vec4 a;
layout(location = 1) vec4 b;
} name;
v2: (changes made by Alejandro Piñeiro)
* Update after introducing struct member splitting (See commit b0c643d)
* Update after only exposing interface_type for blocks, not to any struct
* Update after last changes done for xfb support
v3: use "assign" instead of "add" on the new method added (Tapani)
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Defines how sampler (and pixel pipes) needs to access the data
represented with a resource. The used default is mode is
ETNA_ADDRESSING_MODE_TILED.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
The text segment is shared among multiple contexts, while each one has
its own bufctx. So when reallocating the text segment, some contexts may
end up with stale values in their bufctx's. Instead limit the exposure
to the bufctx to within a single draw.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The sampler border color is encoded in the TMU's blending format (half
floats, 32-bit floats, or integers) and must be clamped to the format's
range unorm/snorm/int ranges by the driver. Additionally, the TMU doesn't
know about how we're abusing the swizzle to support BGRA, A, and LA, so we
have to pre-swizzle the border color for those.
We don't really want to spend half a kb on sampler states in most cases,
so skip generating the variants when the border color is unused or is
0,0,0,0.
When the sampler view is in sample-stencil mode, we need to return uint
stencil values. To do that, fill in the format table to return R8I, and
have the sampler view point at the separate stencil buffer.
Fixes dEQP-GLES31.functional.stencil_texturing.format.depth32f_stencil8_2d
Fixes OOMs in the CTS's packed_pixels.varied_rectangle.* tests -- the
series of texture uploads at the start before texturing occurred would end
up all sitting around as cached jobs for reuse. By flushing immediately,
peak active BO usage goes from 150M to 40M.
We could maybe put some limits on how many jobs we keep around, but blits
seem particularly unlikely to get reused for other drawing.
This is the GLES 3.2 minmax, and also what the closed source driver does.
Avoids hitting OOMs in the CTS's
dEQP-GLES3.functional.texture.units.all_units.only_cube.1.
From the vulkan spec 33.3 "Extension Dependencies":
"Any device extension that has an instance extension dependency that is
not enabled by vkCreateInstance is considered to be unsupported, hence
it must not be returned by vkEnumerateDeviceExtensionProperties for any
VkPhysicalDevice child of the instance."
Therefore we need to check whether the instance-level extensions are
actually enabled when deciding to support a device-level extension or
not.
Furthermore, we need to do this for all instance-level extensions of any
(transitive) device-level extension dependency, due to the following
paragraph:
"If an extension is supported (as queried by
vkEnumerateInstanceExtensionProperties or
vkEnumerateDeviceExtensionProperties), then required extensions of that
extension must also be supported for the same instance or physical
device."
Finally, because some of these vulkan extensions may be implicitly
promoted to future vulkan core API versions, we can also satisfy the
dependency if the vulkan API version is high enough.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
From the vulkan spec 3.2 "Instances":
"Providing a NULL VkInstanceCreateInfo::pApplicationInfo or providing an
apiVersion of 0 is equivalent to providing an apiVersion of
VK_MAKE_VERSION(1,0,0)."
Fixes: ffa15861ef "radv: UseEnumerateInstanceVersion for the default version."
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Section 7.6.2.2 (Standard Uniform Block Layout) of the GL spec says:
The base offset of the first member of a structure is taken from the
aligned offset of the structure itself. The base offset of all other
structure members is derived by taking the offset of the last basic
machine unit consumed by the previous member and adding one.
The current code does not reflect this last sentence - it effectively
instead aligns up the next offset up to the alignment of the previous
member. This causes an issue in exactly one case:
layout(std140) uniform block {
layout(offset=0) vec3 var1;
layout(offset=12) float var2;
};
As per section 7.6.2.1 (Uniform Buffer Object Storage) and elsewhere, a
vec3 consumes 3 floats, i.e. 12 basic machine units. Therefore, `var1`
in the example above consumes units 0-11, with 12 being the first
available offset afterwards. However, before this commit, mesa
incorrectly assumes `var2` must start at offset=16 when using explicit
offsets, which results in a compile-time error. Without explicit
offsets, the shaders actually work fine, indicating that mesa is already
correctly aligning these fields internally. (Just not in the code that
handles explicit buffer offset parsing)
This patch should fix piglit tests:
ssbo-explicit-offset-vec3.vert
ubo-explicit-offset-vec3.vert
Signed-off-by: Niklas Haas <git@haasn.xyz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This only implements the actual opcodes and does not implement support
for using them with specialization constants.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We handle forward declarations by creating the pointer type with it's
storage type based on storage class and just waiting to fill out the
actual deref type until we get the OpTypePointer. Because any
composites using the forward declared type only care about the storage
type (i.e. uint64_t, uvec2, etc.) when creating their glsl_type, this
works fine and we can defer the actual deref_type as far as we need.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This was valid back when the only valid types of pointers were uint32
and uvec2. Now that we're allowing more variety, it could be just about
anything so we'll just drop the assert.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
These correspond roughly to reading/writing OpenCL global pointers. The
idea is that they just take a bare address and load/store from it. Of
course, exactly what this address means is driver-dependent.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
We want to have debug info as well if using
meson's debugoptimized when ndebug is off.
v2: use u_debug functions that do something
even if DEBUG is not set.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Fixes regression caused by
42d672fa6a
st/nine: Bind src not dst in nine_context_box_upload
Before that patch, for user provided textures,
when the texture was destroyed, the safety
check for pending uploads, which according to
the code "Following condition cannot happen currently",
was flushing the queue and thus triggering the upload.
After the patch, the texture destruction was delayed after
the upload. However the user frees the texture buffer,
as it thinks the texture released.
Instead of reverting the faulty patch,
this patch instead flushes the csmt queue right away
after queuing the upload for this type of textures.
This is more future-proof, as we may want to bind the
surface for other reasons in the future.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Cc: 18.3 <mesa-stable@lists.freedesktop.org>
Compilation of user-specified shaders with software fp64 works by
compiling on demand an "fp64-funcs" shader implementing various fp64
operations and then linking it into the "user shader".
In
commit 64b8c86d37
Author: Timothy Arceri <tarceri@itsqueeze.com>
Date: Thu Jan 17 17:16:29 2019 +1100
glsl: be much more aggressive when skipping shader compilation
we changed the behavior of the shader cache to skip compilation earlier
when we get a cache hit.
After the aforementioned commit, compiling a user program using fp64
would store into the cache an entry for the fp64-funcs shader.
Subsequent compilations of uncached user shaders using fp64 would fail
in compile_fp64_funcs() after finding a cache entry for the fp64-funcs,
but being unprepared to read from the cache.
It's unclear to me how to retrieve the cached NIR of the fp64-funcs (if
it even is cached), so just call _mesa_glsl_compile_shader() with
force_recompile=true in order to ensure we generate the fp64-funcs
successfully.
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This allows creating a fd_screen with a renderonly object which will be
used to allocated scanout resources.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
[slight tweak to fix uninitialized 'prsc' in debug print]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes the following piglit test on my VEGA and matches the behaviour in the
tgsi backend.
tests/spec/glsl-1.10/execution/samplers/glsl-fs-shadow2D-clamp-z.shader_test
Fixes: 625dcbbc45 ("amd/common: pass address components individually to ac_build_image_intrinsic")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The util helpers were looking for a non-void channels in a non-mixed
format and returning its snorm/unorm state. However, compressed formats
don't have non-void channels, so they always returned false. V3D wants to
use util_format_is_[su]norm for its border color clamping workarounds, so
fix the functions to return the right answer for these.
This now means that we ignore .is_mixed. I could retain the is_mixed
check, but it doesn't seem like a useful feature -- the only code I could
find that might care is freedreno's blit, which has some notes about how
things are wonky in this area anyway.
Reviewed-by: <Roland Scheidegger sroland@vmware.com>
These tests don't need swrast, so we can always enable them when
build_tests is set. Most of them run to successful completion quickly
(.9s on my SKL).
Reviewed-by: <Roland Scheidegger sroland@vmware.com>
Earlier commit aimed to remove unneeded function declarations. Namely
OpenGL entrypoints which are not applicable for OpenGLES*
Although it did not consider the shared glapi which needs all,
including hidden ones. Resulting in warning/errors like the following
../build/src/mapi/shared-glapi/glapi_mapi_tmp.h:26014:15:
error: no previous prototype for ‘shared_dispatch_stub_1414’ [-Werror=missing-prototypes]
This patch addressed that.
Cc: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reported-by: Eric Anholt <eric@anholt.net>
Fixes: 6148cce388 ("mapi: drop unneeded gl_dispatch_stub declarations")
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
