We don't care about full IA coherency since we always have the
opportunity in GL or Vulkan to flush the data cache. Using IA-coherent
mode is likely just making A64 access slower than it needs to be.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4819>
Instead of emitting the stall MOV "inside" the
SHADER_OPCODE_MEMORY_FENCE generation, use the scheduling fences when
creating the IR.
For IvyBridge, every (data cache) fence is accompained by a render
cache fence, that now is explicit in the IR, two
SHADER_OPCODE_MEMORY_FENCEs are emitted (with different SFIDs).
Because Begin and End interlock intrinsics are effectively memory
barriers, move its handling alongside the other memory barrier
intrinsics. The SHADER_OPCODE_INTERLOCK is still used to distinguish
if we are going to use a SENDC (for Begin) or regular SEND (for End).
This change is a preparation to allow emitting both SENDs in Gen11+
before we can stall on them.
Shader-db results for IVB (i965):
total instructions in shared programs: 11971190 -> 11971200 (<.01%)
instructions in affected programs: 11482 -> 11492 (0.09%)
helped: 0
HURT: 8
HURT stats (abs) min: 1 max: 3 x̄: 1.25 x̃: 1
HURT stats (rel) min: 0.03% max: 0.50% x̄: 0.14% x̃: 0.10%
95% mean confidence interval for instructions value: 0.66 1.84
95% mean confidence interval for instructions %-change: 0.01% 0.27%
Instructions are HURT.
Unlike the previous code, that used the `mov g1 g2` trick to force
both `g1` and `g2` to stall, the scheduling fence will generate `mov
null g1` and `mov null g2`. During review it was decided it was not
worth keeping the special codepath for the small effect will have.
Shader-db results for HSW (i965), BDW and SKL don't have a change
on instruction count, but do report changes in cycles count, showing
SKL results below
total cycles in shared programs: 341738444 -> 341710570 (<.01%)
cycles in affected programs: 7240002 -> 7212128 (-0.38%)
helped: 46
HURT: 5
helped stats (abs) min: 14 max: 1940 x̄: 676.22 x̃: 154
helped stats (rel) min: <.01% max: 2.62% x̄: 1.28% x̃: 0.95%
HURT stats (abs) min: 2 max: 1768 x̄: 646.40 x̃: 362
HURT stats (rel) min: <.01% max: 0.83% x̄: 0.28% x̃: 0.08%
95% mean confidence interval for cycles value: -777.71 -315.38
95% mean confidence interval for cycles %-change: -1.42% -0.83%
Cycles are helped.
This seems to be the effect of allocating two registers separatedly
instead of a single one with size 2, which causes different register
allocation, affecting the cycle estimates.
while ICL also has not change on instruction count but report changes
negative changes in cycles
total cycles in shared programs: 352665369 -> 352707484 (0.01%)
cycles in affected programs: 9608288 -> 9650403 (0.44%)
helped: 4
HURT: 104
helped stats (abs) min: 24 max: 128 x̄: 88.50 x̃: 101
helped stats (rel) min: <.01% max: 0.85% x̄: 0.46% x̃: 0.49%
HURT stats (abs) min: 2 max: 2016 x̄: 408.36 x̃: 48
HURT stats (rel) min: <.01% max: 3.31% x̄: 0.88% x̃: 0.45%
95% mean confidence interval for cycles value: 256.67 523.24
95% mean confidence interval for cycles %-change: 0.63% 1.03%
Cycles are HURT.
AFAICT this is the result of the case above.
Shader-db results for TGL have similar cycles result as ICL, but also
affect instructions
total instructions in shared programs: 17690586 -> 17690597 (<.01%)
instructions in affected programs: 64617 -> 64628 (0.02%)
helped: 55
HURT: 32
helped stats (abs) min: 1 max: 16 x̄: 4.13 x̃: 3
helped stats (rel) min: 0.05% max: 2.78% x̄: 0.86% x̃: 0.74%
HURT stats (abs) min: 1 max: 65 x̄: 7.44 x̃: 2
HURT stats (rel) min: 0.05% max: 4.58% x̄: 1.13% x̃: 0.69%
95% mean confidence interval for instructions value: -2.03 2.28
95% mean confidence interval for instructions %-change: -0.41% 0.15%
Inconclusive result (value mean confidence interval includes 0).
Now that more is done in the IR, more dependencies are visible and
more SWSB annotations are emitted. Mixed with different register
allocation decisions like above, some shaders will see more `sync
nops` while others able to avoid them.
Most of the new `sync nops` are also redundant and could be dropped,
which will be fixed in a separate change.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3278>
Change brw_memory_fence to return the number of messages emitted, and
use that to update the send_count statistic in code generation.
This will fix the book-keeping for IVB since the memory fences will
result in two SEND messages.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4646>
Gen4/5's rounding instructions operate differently than later Gens'.
They all return the floor of the input and the "Round-increment"
conditional modifier answers whether the result should be incremented by
1.0 to get the appropriate result for the operation (and thus its
behavior is determined by the round opcode; e.g., RNDZ vs RNDE).
Since this requires a second instruciton (a predicated ADD) that
consumes the result of the round instruction, the round instruction
cannot write its result directly to the (write-only) message registers.
By emitting the ADD in the generator, the backend thinks it's safe to
store the round's result directly to the message register file.
To avoid this, we move the emission of the ADD instruction to the NIR
translator so that the backend has the information it needs.
I suspect this also fixes code generated for RNDZ.SAT but since
Gen4/5 don't support GLSL 1.30 which adds the trunc() function, I
couldn't write a piglit test to confirm. My thinking is that if x=-0.5:
sat(trunc(-0.5)) = 0.0
But on Gen4/5 where sat(trunc(x)) is implemented as
rndz.r.f0 result, x // result = floor(x)
// set f0 if increment needed
(+f0) add result, result, 1.0 // fixup so result = trunc(x)
then putting saturate on both instructions will give the wrong result.
floor(-0.5) = -1.0
sat(floor(-0.5)) = 0.0
// +1 increment would be needed since floor(-0.5) != trunc(-0.5)
sat(sat(floor(-0.5)) + 1.0) = 1.0
Fixes: 6f394343b1 ("nir/algebraic: i2f(f2i()) -> trunc()")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2355
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3459>
Change brw_inst_set_opcode() and brw_inst_opcode() to call
brw_opcode_encode/decode() transparently in order to translate between
hardware and IR opcodes, and update the EU compaction code in order to
do the same as needed, so we can eventually drop the one-to-one
correspondence between hardware and IR opcodes.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This rewrites the current opcode description tables as a more compact
flat data structure. The purpose is to allow efficient constant-time
look-up by either HW or IR opcode, which will allow us to drop the
hard-coded correspondence between HW and IR opcodes -- See the next
commits for the rationale.
brw_eu.c is now built as C++ source so we can take advantage of
pointers to member in order to make the look-up function work
regardless of the opcode_desc member used as look-up key.
v2: Optimize devinfo struct comparison (Caio)
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2:
- Fix bug in defining BRW_CR0_FP_MODE_MASK.
v3:
- Update comment (Caio).
v4:
- Split the patch into the helper (this one) and the new
opcode (Caio).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
When dumping shader's assembly with INTEL_DEBUG=vs,tcs,...
sha1 of the resulting assembly is also printed, having environment
variable INTEL_SHADER_ASM_READ_PATH present driver will try to
load a "%sha1%.bin" file from the path and substitute current
assembly with the one from the file.
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Gen11 SLM is not on L3 anymore, so now the hardware has two separate
fences. Add a way to control which fence types to use.
At this time, we don't have enough information in NIR to control the
visibility of the memory being fenced, so for now be conservative and
assume that fences will need a stall. With more information later
we'll be able to reduce those.
Fixes Vulkan CTS tests in ICL:
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_nonlocal.workgroup.guard_local.buffer.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.device.payload_local.image.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.buffer.guard_nonlocal.workgroup.comp
dEQP-VK.memory_model.message_passing.core11.u32.coherent.fence_fence.atomicwrite.workgroup.payload_local.image.guard_nonlocal.workgroup.comp
The whole set of supported tests in dEQP-VK.memory_model.* group
should be passing in ICL now.
v2: Pass BTI around instead of having an enum. (Jason)
Emit two SHADER_OPCODE_MEMORY_FENCE instead of one that gets
transformed into two. (Jason)
List tests fixed. (Lionel)
v3: For clarity, split the decision of which fences to emit from the
emission code. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
v2: 1) Drop changes for vec4 backend as on Gen11+ we don't support
align16 mode (Matt Turner)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We set header_present but then pass it some random garbage. Give it g0
instead. I'm not actually sure this does anything but g0 is the usual
header data and this is what the windows driver does so it seems like a
good idea.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For split indirect sends we have to put the EOT parameter in the
extended descriptor as well as the instruction itself so just calling
brw_inst_set_eot is insufficient. Moving the EOT handling handling into
the send_indirect_[split]_message helper lets us handle it properly.
We want to be able to extract data from descriptors as well as unify a
bit of the descriptor construction.
One of the unifications we do is to unify the read/write and dataport
descriptors. On gen4-5, read/write are substantially different and the
read descriptors change between gen4 and gen4.x. On gen6, they unified
layouts between read, write, and dataport. Then, on gen8, they added
one bit to the message type field but left it reserved MBZ for
read/write messages. This commit chooses to treat that as if they
expanded the field everywhere and just didn't have enough enum values
for read/write to bother with the extra bit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This commit pulls the surface descriptor helpers out into brw_eu.h and
makes them no longer depend on the codegen infrastructure. This should
allow us to use them directly from the IR code instead of the generator.
This change is unfortunately less mechanical than perhaps one would like
but it should be fairly straightforward.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
All of the other brw_*_desc functions take a devinfo parameter, and all
of the others at least have an assert that uses it. Keep the parameter,
but mark it as unused.
Silences 37 warnings like:
In file included from src/intel/common/gen_disasm.c:27:0:
src/intel/compiler/brw_eu.h: In function ‘brw_pixel_interp_desc’:
src/intel/compiler/brw_eu.h:377:53: warning: unused parameter ‘devinfo’ [-Wunused-parameter]
brw_pixel_interp_desc(const struct gen_device_info *devinfo,
^~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The return value is not used anymore. This allows simplifying the
code slightly, and in addition it should frustrate anybody's attempts
to continue using the obsolete piecemeal approach to construct a
message descriptor in combination with brw_send_indirect_message().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The current approach of returning a setup instruction where additional
descriptor fields can be specified is still supported in order to keep
things working, but it will be removed later in this series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This replaces brw_set_message_descriptor() with the composition of
brw_set_desc() and a new inline helper function that packs the common
message descriptor controls into an integer. The goal is to represent
all message descriptors as a 32-bit integer which is written at once
into the instruction, which is more flexible (SENDS anyone?), robust
(see d2eecf0b0b fixing an issue
ultimately caused by some bits of the extended message descriptor
being left undefined) and future-proof than the current approach of
specifying the individual descriptor fields directly into the
instruction.
This approach also seems more self-documenting, since it will allow
removing calls to functions with way too many arguments like
brw_set_*_message() and brw_send_indirect_message(), and instead
provide a single descriptor argument constructed from an appropriate
combination of brw_*_desc() helpers.
Note that because brw_set_message_descriptor() was (conditionally?)
overriding fields of the instruction which strictly speaking weren't
part of the message descriptor, this involves calling
brw_inst_set_sfid() and brw_inst_set_eot() in some cases in addition
to brw_set_desc().
v2: Use SET_BITS macro instead of left shift (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of the state stack that's based on copying a dummy instruction
around, we start using a logical stack of brw_insn_states. This uses a
bit less memory and is way less conceptually bogus.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is much cleaner than everything that wants a default value poking
at the bits of p->current directly.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Adds suppport for ARB_fragment_shader_interlock. We achieve
the interlock and fragment ordering by issuing a memory fence
via sendc.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
v2 (idr): Don't allow CSEL with a non-float src2.
v3 (idr): Add CSEL to fs_inst::flags_written. Suggested by Matt.
v4 (idr): Only set BRW_ALIGN_16 on Gen < 10 (suggested by Matt). Don't
reset the access mode afterwards (suggested by Samuel and Matt). Add
support for CSEL not modifying the flags to more places (requested by
Matt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes sure that the header-present bit of the message descriptor
is in sync with the IR instruction fields, which gives the optimizer
more control to avoid the overhead of setting up a message header when
it's possible to do so.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Fix alignment style (Topi Pohjolainen)
(Jason Ekstrand)
- Enable bit_size parameter to scattered messages to enable different
bitsizes byte/word/dword.
- Remove use of brw_send_indirect_scattered_message in favor of
brw_send_indirect_surface_message.
- Move scattered messages to surface messages namespace.
- Assert align1 for scattered messages and assume Gen8+.
- Inline brw_set_dp_byte_scattered_read.
v3: (Jason Ekstrand)
- Use renamed brw_byte_scattered_data_element_from_bit_size method
- Assert scattered read for Gen8+ and Haswell.
- Use conditional expresion at components_read.
- Include comment about params for scattered opcodes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: (Jason Ekstrand)
- Enable bit_size parameter to scattered messages to enable different
bitsizes byte/word/dword.
- Remove use of brw_send_indirect_scattered_message in favor of
brw_send_indirect_surface_message.
- Move scattered messages to surface messages namespace.
- Assert align1 for scattered messages and assume Gen8+.
- Inline brw_set_dp_byte_scattered_write.
v3: - Remove leftover newline (Topi Pohjolainen)
- Rename brw_data_size to brw_scattered_data_element and use
defines instead of an enum (Jason Ekstrand)
- Assert scattered write for Gen8+ and Haswell (Jason Ekstrand)
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Although it is possible to emit them directly as AND/OR on brw_fs_nir,
having a specific opcode makes it easier to remove duplicate settings
later.
v2: (Curro)
- Set thread control to 'switch' when using the control register
- Use a single SHADER_OPCODE_RND_MODE opcode taking an immediate
with the rounding mode.
- Avoid magic numbers setting rounding mode field at control register.
v3: (Curro)
- Remove redundant and add missing whitespace lines.
- Match printing instruction to IR opcode "rnd_mode"
v4: (Topi Pohjolainen)
- Fix code style.
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
