On some hardware (e.g. Mali400) the shader needs to apply some
transformations for correct gl_FragCoord handling. The lowering
actions look like the following in pseudocode:
gl_FragCoord.xyz = gl_FragCoord_orig.xyz
gl_FragCoord.w = 1.0 / gl_FragCoord_orig.w
Add this lowering as a nir pass in preparation for using it in the driver.
Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We already add the LOD src, so go ahead and update the texop as well
when this option is set.
v2: Make it an option. (Rob Clark)
v3: Use a more concise name suggested by Jason.
Reviewed-by: Rob Clark <robdclark@gmail.com>
We have a macro for this now; no reason to hand-roll it for derefs.
While we're here, move the NIR_DEFINE_CAST for derefs down to where all
the other ones are.
Reviewed-by: Eric Anholt <eric@anholt.net>
When we have a bindless sampler, we need an instruction header. Even in
SIMD8, this pushes the instruction over the sampler message size maximum
of 11 registers. Instead, we have to lower TXD to TXL.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The mali utgard pp doesn't support a sign instruction.
In the ARM offline shader compiler, the sign function is implemented
using sub(gt(0.0, a), lt(0.0, a)).
This is a generic optimization, so implement it in the nir level when
lower_fsign is set, alongside the lowering for isign.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Other nir_src_as_* functions just take a nir_src. It's not that much
more memory copying and the constness preserving really isn't worth the
cognitive dissonance.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
On Mali hardware (supported by Panfrost and Lima), the fixed-function
transformation from world-space to screen-space coordinates is done in
the vertex shader prior to writing out the gl_Position varying, rather
than in dedicated hardware. This commit adds a shared NIR pass for
implementing coordinate transformation and lowering gl_Position writes
into screen-space gl_Position writes.
v2: Run directly on derefs before io/vars are lowered to cleanup the
code substantially. Thank you to Qiang for this suggestion!
v3: Bikeshed continues.
v4: Add to Makefile.sources (per Jason's comment). Bikeshed comment.
Ian and Qiang's reviews are from v3, but no real functional changes from
v4. Rob's review is from v4.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Suggested-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
This commit adds new nir_load/store_scratch opcodes which read and write
a virtual scratch space. It's up to the back-end to figure out what to
do with it and where to put the actual scratch data.
v2: Drop const_index comments (by anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: handle atomics as well
make use of nir_rewrite_image_intrinsic
v3: remove call to nir_remove_dead_derefs
v4: (Timothy Arceri) dont actually call lowering yet
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v3)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We have a pass to lower global registers to locals and many drivers
dutifully call it. However, no one ever creates a global register ever
so it's all dead code. It's time we bury it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All we ever do is initialize it to zero, clone it, print it, and
validate it. No one ever sets or uses it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When I implemented opt_if_loop_last_continue() I had restricted
this pass from moving other if-statements inside the branch opposite
the continue. At the time it was causing a bunch of spilling in
shader-db for i965.
However Samuel Pitoiset noticed that making this pass more aggressive
significantly improved the performance of Doom on RADV. Below are
the statistics he gathered.
28717 shaders in 14931 tests
Totals:
SGPRS: 1267317 -> 1267549 (0.02 %)
VGPRS: 896876 -> 895920 (-0.11 %)
Spilled SGPRs: 24701 -> 26367 (6.74 %)
Code Size: 48379452 -> 48507880 (0.27 %) bytes
Max Waves: 241159 -> 241190 (0.01 %)
Totals from affected shaders:
SGPRS: 23584 -> 23816 (0.98 %)
VGPRS: 25908 -> 24952 (-3.69 %)
Spilled SGPRs: 503 -> 2169 (331.21 %)
Code Size: 2471392 -> 2599820 (5.20 %) bytes
Max Waves: 586 -> 617 (5.29 %)
The codesize increases is related to Wolfenstein II it seems largely
due to an increase in phis rather than the existing jumps.
This gives +10% FPS with Doom on my Vega56.
Rhys Perry also benchmarked Doom on his VEGA64:
Before: 72.53 FPS
After: 80.77 FPS
v2: disable pass on non-AMD drivers
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This pass attempts to dectect code sequences like
if (x < y) {
z = y - x;
...
}
and replace them with sequences like
t = x - y;
if (t < 0) {
z = -t;
...
}
On architectures where the subtract can generate the flags used by the
if-statement, this saves an instruction. It's also possible that moving
an instruction out of the if-statement will allow
nir_opt_peephole_select to convert the whole thing to a bcsel.
Currently only floating point compares and adds are supported. Adding
support for integer will be a challenge due to integer overflow. There
are a couple possible solutions, but they may not apply to all
architectures.
v2: Fix a typo in the commit message and a couple typos in comments.
Fix possible NULL pointer deref from result of push_block(). Add
missing (-A + B) case. Suggested by Caio.
v3: Fix is_not_const_zero to work correctly with types other than
nir_type_float32. Suggested by Ken.
v4: Add some comments explaining how this works. Suggested by Ken.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Move bug fix in get_neg_instr from the next patch to this patch
(where it was intended to be in the first place). Noticed by Caio.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow us to make use of the selection control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Note this only supports if-statements as we dont support switches
in NIR.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
This will allow us to make use of the loop control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
On Intel, we have both bindless and bindful and we'd like to use them at
the same time if we can so we need to be able to distinguish at the NIR
level between the two. This also fixes nir_lower_tex to properly handle
bindless in its tex_texture_size and get_texture_lod helpers.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This lowering isn't needed for RADV because AMDGCN has two
instructions. It will be disabled for RADV in an upcoming series.
While we are at it, factorize a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Values inside the offsets parameter of textureGatherOffsets are required to be
constants in the range of [GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET,
GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET].
As this range is never outside [-32, 31] for all existing drivers inside mesa,
we can simply store the offsets as a int8_t[4][2] array inside nir_tex_instr.
Right now only Nvidia hardware supports this in hardware, so we can turn this
on inside Nouveau for the NIR path as it is already enabled with the TGSI one.
v2: use memcpy instead of for loops
add missing bits to nir_instr_set
don't show offsets if they are all 0
v3: default offsets aren't all 0
v4: rename offsets -> tg4_offsets
rename nir_tex_instr_has_explicit_offsets -> nir_tex_instr_has_explicit_tg4_offsets
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This reverts commit db57db5317. When
building IR, nothing is really immutable and, since C has no concept of
constness propagating beyond the first pointer, we have to be vary
careful with how we use it. To just throw const into a function like
this is a lie.
Instead, we should just drop the unneeded const in spirv_to_nir which
this commit does along with the revert.
This pass was originally written for lowering TCS output reads and
writes but it is also applicable just about anything including UBOs,
SSBOs, and shared variables.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It's just a 32-bit index and offset. We're going to want to use it in
GL as well so stop talking about Vulkan.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: (all from Jason)
Reuse existing function for the end of the block combinations.
Check the SSA values are coming from the right place in tests.
Document the case when the store to array_deref is reused.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Oftentimes various nir shaders after lowering will be the same, or
almost the same. For example, this can happen when the same shader is
linked with different shaders to form different pipelines and
cross-stage optimizations don't kick in to change it. We want to avoid
running the backend twice on these shaders. We were already doing this
with radeonsi, but we were storing a few extra pieces of information
that made this much less effective compared to TGSI. The worse offender
by far was the program name, which caused most of the cache misses. This
pass strips out these pieces of information, controlled by the NIR_STRIP
debug env variable.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This adds support to loop analysis for loops where the induction
variable is compared to the result of min(variable, constant).
For example:
for (int i = 0; i < imin(x, 4); i++)
...
We add a new bool to the loop terminator struct in order to
differentiate terminators with this exit condition.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In order to stop continuously partially unrolling the same loop
we add the bool partially_unrolled to nir_loop, we add it here
rather than in nir_loop_info because nir_loop_info is only set
via loop analysis and is intended to be cleared before each
analysis. Also nir_loop_info is never cloned.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This detects an induction variable used as an array index to guess
the trip count of the loop. This enables us to do a partial
unroll of the loop, which can eventually result in the loop being
eliminated.
v2: check if the induction var is used to index more than a single
array and if so get the size of the smallest array.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of trusting the caller to already have created a softfp64
function shader and added all its functions to our shader, we simply
take the softfp64 shader as an argument and do the function inlining
ouselves. This means that there's no more nasty functions lying around
that the caller needs to worry about cleaning up.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
