Original patch by Petri Latvala <petri.latvala@intel.com>:
Add an optimization pass that drops min/max expression operands that
can be proven to not contribute to the final result. The algorithm is
similar to alpha-beta pruning on a minmax search, from the field of
AI.
This optimization pass can optimize min/max expressions where operands
are min/max expressions. Such code can appear in shaders by itself, or
as the result of clamp() or AMD_shader_trinary_minmax functions.
This optimization pass improves the generated code for piglit's
AMD_shader_trinary_minmax tests as follows:
total instructions in shared programs: 75 -> 67 (-10.67%)
instructions in affected programs: 60 -> 52 (-13.33%)
GAINED: 0
LOST: 0
All tests (max3, min3, mid3) improved.
A full shader-db run:
total instructions in shared programs: 4293603 -> 4293575 (-0.00%)
instructions in affected programs: 1188 -> 1160 (-2.36%)
GAINED: 0
LOST: 0
Improvements happen in Guacamelee and Serious Sam 3. One shader from
Dungeon Defenders is hurt by shader-db metrics (26 -> 28), because of
dropping of a (constant float (0.00000)) operand, which was
compiled to a saturate modifier.
Version 2 by Iago Toral Quiroga <itoral@igalia.com>:
Changes from review feedback:
- Squashed various cosmetic changes sent by Matt Turner.
- Make less_all_components return an enum rather than setting a class member.
(Suggested by Mat Turner). Also, renamed it to compare_components.
- Make less_all_components, smaller_constant and larger_constant static.
(Suggested by Mat Turner)
- Change mixmax_range to call its limits "low" and "high" instead of
"range[0]" and "range[1]". (Suggested by Connor Abbot).
- Use ir_builder swizzle helpers in swizzle_if_required(). (Suggested by
Connor Abbot).
- Make the logic more clearer by rearrenging the code and commenting.
(Suggested by Connor Abbot).
- Added comment to explain why we need to recurse twice. (Suggested by
Connor Abbot).
- If we cannot prune an expression, do not return early. Instead, attempt
to prune its children. (Suggested by Connor Abbot).
Other changes:
- Instead of having a global "valid" visitor member, let the various functions
that can determine this status return a boolean and check for its value
to decide what to do in each case. This is more flexible and allows to
recurse into children of parents that could not be prunned due to invalid
ranges (so related to the last bullet in the review feedback).
- Make sure we always check if a range is valid before working with it. Since
any use of get_range, combine_range or range_intersection can invalidate
a range we should check for this situation every time we use any of these
functions.
Version 3 by Iago Toral Quiroga <itoral@igalia.com>:
Changes from review feedback:
- Now we can make get_range, combine_range and range_intersection static too
(suggested by Connor Abbot).
- Do not return NULL when looking for the larger or greater constant into
mixed vector constants. Instead, produce a new constant by doing a
component-wise minmax. With this we can also remove of the validations when
we call into these functions (suggested by Connor Abbot).
- Add a comment explaining the meaning of the baserange argument in
prune_expression (suggested by Connor Abbot).
Other changes:
- Eliminate minmax expressions operating on constant vectors with mixed values
by resolving them.
No piglit regressions observed with Version 3.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76861
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Valgrind massif results for a trimmed apitrace of dota2:
n time(i) total(B) useful-heap(B) extra-heap(B) stacks(B)
Before (32-bit): 74 40,578,719,715 67,762,208 62,263,404 5,498,804 0
After (32-bit): 52 40,565,579,466 66,359,800 61,187,818 5,171,982 0
Before (64-bit): 74 37,129,541,061 95,195,160 87,369,671 7,825,489 0
After (64-bit): 76 37,134,691,404 93,271,352 85,900,223 7,371,129 0
A real savings of 1.0MiB on 32-bit and 1.4MiB on 64-bit.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Later patches will give every ir_var_temporary the same name in release
builds. Adding a bunch of variables named "compiler_temp" to the symbol
table can only cause problems.
No change Valgrind massif results for a trimmed apitrace of dota2.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
After compilation (and before linking) we can eliminate quite a few
built-in variables. Basically, any uniform or constant (e.g.,
gl_MaxVertexTextureImageUnits) that isn't used (with one exception) can
be eliminated. System values, vertex shader inputs (with one
exception), and fragment shader outputs that are not used and not
re-declared in the shader text can also be removed.
gl_ModelViewProjectMatrix and gl_Vertex are used by the built-in
function ftransform. There are some complications with eliminating
these variables (see the comment in the patch), so they are not
eliminated.
Valgrind massif results for a trimmed apitrace of dota2:
n time(i) total(B) useful-heap(B) extra-heap(B) stacks(B)
Before (32-bit): 46 40,661,487,174 75,116,800 68,854,065 6,262,735 0
After (32-bit): 50 40,564,927,443 69,185,408 63,683,871 5,501,537 0
Before (64-bit): 64 37,200,329,700 104,872,672 96,514,546 8,358,126 0
After (64-bit): 59 36,822,048,449 96,526,888 89,113,000 7,413,888 0
A real savings of 4.9MiB on 32-bit and 7.0MiB on 64-bit.
v2: Don't remove any built-in with Transpose in the name.
v3: Fix comment typo noticed by Anuj.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Suggested-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously we had to keep unreachable global symbols in the symbol table
because the symbol table is used during linking. Having the symbol
table retain pointers to freed memory... what could possibly go wrong?
At the same time, this meant that we kept live references to tons of
memory that was no longer needed.
New strategy: destroy the old symbol table, and make a new one from the
reachable symbols.
Valgrind massif results for a trimmed apitrace of dota2:
n time(i) total(B) useful-heap(B) extra-heap(B) stacks(B)
Before (32-bit): 59 40,642,425,451 76,337,968 69,720,886 6,617,082 0
After (32-bit): 46 40,661,487,174 75,116,800 68,854,065 6,262,735 0
Before (64-bit): 79 37,179,441,771 106,986,512 98,112,095 8,874,417 0
After (64-bit): 64 37,200,329,700 104,872,672 96,514,546 8,358,126 0
A real savings of 846KiB on 32-bit and 1.5MiB on 64-bit.
v2: (by Kenneth Graunke) Just add the ir_function from the IR stream,
rather than looking it up in the symbol table; they're now
identical.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For a long time, we've wanted a place to put utility code which isn't
directly tied to Mesa or Gallium internals. This patch creates a new
src/util directory for exactly that purpose, and builds the contents as
libmesautil.la.
ralloc seemed like a good first candidate. These days, it's directly
used by mesa/main, i965, i915, and r300g, so keeping it in src/glsl
didn't make much sense.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
v2 (Jason Ekstrand): More realloc uses and some scons fixes
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is needed to make Unigine Heaven 4.0 and Unigine Valley 1.0 work
with sample shading.
Also, if this is disabled, the error message at least makes sense now.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The intention of this pass was to give us better instruction scheduling
opportunities, but it unexpectedly reduced some instruction counts as
well:
total instructions in shared programs: 1666639 -> 1666073 (-0.03%)
instructions in affected programs: 54612 -> 54046 (-1.04%)
(and trades 4 SIMD16 programs in SS3)
This works like glsl-1.20+'s invariant redeclarations, but with fewer
restrictions, since `precise` is allowed on pretty much anything.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This allows them to be moved to .rodata, and allow us to be sure that they
will not be modified.
Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
ARB, OES, then everything else. If there's ever a KHR shading language
extension, it should go between ARB and OES.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link error conditions added in previous patch are equally applicable
to GL_ARB_fragment_coord_conventions implementation. Extension's spec
says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that program
that have a static use of gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must have
the same set of qualifiers."
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch causes the shader link to fail if we have multiple fragment
shaders with conflicting layout qualifiers for gl_FragCoord.
V2: Restructure the code and add conditions to correctly handle the
following case:
fragment shader 1:
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
foo();
gl_FragColor = gl_FragData;
}
fragment shader 2:
layout(pixel_center_integer) in vec4 gl_FragCoord;
void foo()
{
}
V3:
Allow linking in the following case:
fragment shader 1:
void main()
{
foo();
gl_FragColor = gl_FragCoord;
}
fragment shader 2:
in vec4 gl_FragCoord;
void foo()
{
...
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Loop unrolling will need to know a few more options in the future.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we pass in gl_shader_compiler_options, it makes sense to just
use options->MaxUnrollIterations, rather than passing a separate
parameter.
Half of the invocations already passed options->MaxUnrollIterations,
while the other half passed in a hardcoded value of 32.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The next patch will introduce an optimization that only works when
integers are not represented as floating point values.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The next few patches will introduce an optimization that only works when
integers are not represented as floating point values.
v2: Re-word-wrap a line, as requested by Ian Romanick.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
While we want to be able to print to stdout for glsl_compiler, for
debugging drivers we want to be able to dump to stderr because that's
where other driver debug (like LIBGL_DEBUG) tends to go, and because some
apps actually close stdout to shut up their own messages (such as the X
Server, or NWN).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This adds the necessary bits for both the API and the GLSL compiler.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Grab the parsed invocation count, check for consistency
during linking, and finally save the result in
gl_shader_program Geom.Invocations.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
We introduce a new merge_in_qualifier ast_type_qualifier
which allows specialized handling of merging input layout
qualifiers.
By merging layout qualifiers into state->in_qualifier, we
allow multiple input qualifiers. For example, the primitive
type can be specified specified separately from the
invocations count (ARB_gpu_shader5).
state->gs_input_prim_type is moved into state->in_qualifier->prim_type
state->gs_input_prim_type_specified is still processed separately
so we can determine when the input primitive is specified. This
is important since certain scenerios are not supported until after
the primitive type has been specified in the shader code.
v4:
* Merge with compute shader input layout qualifiers
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
v2: Document that the 3-element array MaxComputeWorkGroupCount is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2: Document that the 3-element array MaxComputeWorkGroupSize is
indexed by dimension.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OpenGL with ARB_ES2_compatibility allows shaders that specify #version
100.
This fixes the Khronos OpenGL test(Texture_Rectangle_Samplers_frag.test)
failure.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Previously the reason we needed is_array was because we used array_size == NULL to
represent both non-arrays and unsized arrays. Now that we use a non-NULL
array_specifier to represent an unsized array, is_array is redundant.
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Adds array specifier object to hold array information
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Most of the time it is not necessary to perform type inference to
compile GLSL; the type of every expression can be inferred from the
contents of the expression itself (and previous type declarations).
The exception is aggregate initializers: their type is determined by
the LHS of the variable being assigned to. For example, in the
statement:
mat2 foo = { { 1, 2 }, { 3, 4 } };
the type of { 1, 2 } is only known to be vec2 (as opposed to, say,
ivec2, uvec2, int[2], or a struct) because of the fact that the result
is being assigned to a mat2.
Previous to this patch, we handled this situation by doing some type
inference during parsing: when parsing a declaration like the one
above, we would call _mesa_set_aggregate_type(), which would infer the
type of each aggregate initializer and store it in the corresponding
ast_aggregate_initializer::constructor_type field. Since this
happened at parse time, we couldn't do the type inference using
glsl_type objects; we had to use ast_type_specifiers, which are much
more awkward to work with. Things are about to get more complicated
when we add support for ARB_arrays_of_arrays.
This patch simplifies things by postponing the call to
_mesa_set_aggregate_type() until ast-to-hir time, when we have access
to glsl_type objects. As a side benefit, we only need to have one
call to _mesa_set_aggregate_type() now, instead of six.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reduces vertex shader instruction counts in DOTA2 by 6.42%, L4D2 by
4.61%, and CS:GO by 5.71%.
total instructions in shared programs: 1500153 -> 1498191 (-0.13%)
instructions in affected programs: 59919 -> 57957 (-3.27%)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This flag was really just a proxy for determining whether the backend
was vector (AOS) or scalar (SOA). It will be used to apply a future
optimization only for vector backends.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These are replaced with
ctx->Const.Program[MESA_SHADER_{VERTEX,FRAGMENT,GEOMETRY}]. In
patches to follow, this will allow us to replace a lot of ad-hoc logic
with a variable index into the array.
With the exception of the changes to mtypes.h, this patch was
generated entirely by the command:
find src -type f '(' -iname '*.c' -o -iname '*.cpp' -o -iname '*.py' \
-o -iname '*.y' ')' -print0 | xargs -0 sed -i \
-e 's/Const\.VertexProgram/Const.Program[MESA_SHADER_VERTEX]/g' \
-e 's/Const\.GeometryProgram/Const.Program[MESA_SHADER_GEOMETRY]/g' \
-e 's/Const\.FragmentProgram/Const.Program[MESA_SHADER_FRAGMENT]/g'
Suggested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
