Overwriting the src register is a very bad idea - it logically maps onto
the TGSI registers, and so is effectively overwriting the source values.
Reported-by: Boyan Ding <boyan.j.ding@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
radeonsi added stricter checking for correct swizzles in debug builds.
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Fixes: 4cf2942777 ("radeonsi: support 64-bit system values")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In preparation for enabling MSAA in OpenSWR, the state trackers need to
be aware of multisample pixel formats for software renderers. This patch
allows glx-xlib to query the renderer for support of pixel
formats with multisample, and create multisample resources.
This change is benign to softpipe and llvmpipe, as is_format_supported
returns FALSE for any sample_count > 1. OpenSWR does the same at the
moment, but that will change soon.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
With this patch, we will specify the current context
when we invalidate the surface before the surface is
put back to the recycled surface pool. This allows the
winsys layer to use the specified context to do the
invalidation rather than using the last context that
referenced the surface. This prevents race condition if
the last referenced context is now made current in another thread.
Tested with MTT glretrace, NobelClinicianViewer.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
If two contexts wanted to access the same buffer at the same time, it would
end up on two validation lists simultaneously, which might cause a
PIPE_ERROR_RETRY when trying to validate it from one context while the other
context already had it validated but not yet fenced.
In that situation we could spin until the error goes away, or apply various
more or less expensive locking schemes to save cpu.
Here we use a scheme that briefly locks after fencing but avoids locking on
validation in the non-contended case.
v2:
Make sure we broadcast not only on releasing buffers after fencing, but also
after releasing buffers in the pb_validate_validate error path.
v3:
Don't broadcast on PIPE_ERROR_RETRY because that would increase the chance
of starvation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
3D wasn't officially supported before virtual HW version 8 so we can
remove this old code.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Currently, surface propagation for colliding render target resource is
done at framebuffer emit time for vgpu10. This patch
adds the surface propagation for non-vgpu10 path to emit_fb_vgpu9()
and removes the redundant surface copy at set time.
Tested with MTT glretrace, piglit, NobelClinicianViewer, Turbine, Cinebench.
Reviewed-by: Neha Bhende <bhenden@vmware.com>
The zslice index to svga_texture_copy_handle_resource() is not adjusted
and should be a signed integer.
This patch fixes piglit tests for non-vgpu10 including
spec@arb_framebuffer_object@fbo-generatemipmap-3d
spec@glsl-1.20@execution@tex-miplevel-selection gl2:texture* 3d
Tested with MTT piglit and glretrace
This implementation is based on querying the time just before swap/present
and doing a Sleep() if needed. There is no sync to vblank or actual
coordination with the GPU. This isn't perfect, but basically works.
We've had some request for this functionality, and it sounds like there
are some Windows GL apps that refuse to start if the driver doesn't
advertise this extension.
Note: NVIDIA's Windows OpenGL driver advertises the WGL_EXT_swap_control
string both with wglGetExtensionsStringEXT() and with
glGetString(GL_EXTENSIONS). We're only advertising it with the former at
this time.
Tested with asst. Mesa demos, Google Earth, Lightsmark, etc.
VMware bug 1591534.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
When a backing surface is reused, it is possible that
the original surface has been changed. So before the backing surface
is bound again, we need to sync up the surface.
This patch creates a new helper function svga_texture_copy_handle_resource()
to sync up the backing surface resource.
This patch, together with the backing surface dirty bit fix, fixes
the rendering corruption in NobelClinicianViewer when rotating the model.
Also tested with MTT glretrace, piglit, Cinebench, Turbine.
Reviewed-by: Brian Paul <brianp@vmware.com>
The reset flag specifies if the dirty bit needs to be reset
after the surface is propagated to the texture. This is used
to make sure that the dirty bit is not reset and stay unset
before the surface is unbound.
Reviewed-by: Brian Paul <brianp@vmware.com>
The new has_backed_views flag specifies if any of the render target
views or depth stencil view is a backing surface view.
The flag is used in svga_propagate_rendertargets() so it can return early
if there is no surface to propagate.
Reviewed-by: Brian Paul <brianp@vmware.com>
A texture can be destroyed from a different context from which it is
created, but destroying the render target view from a different context
will cause svga device errors. Similar to shader resource view,
this patch skips destroying render target view or depth stencil view
from a non-parent context.
Fixes driver errors running NobelClinician Viewer application.
Tested with NobelClinician Viewer, MTT piglit, glretrace.
Reviewed-by: Brian Paul <brianp@vmware.com>
With this patch, rasterization will be disabled if the
rasterizer_discard flag is set or the fragment shader
is undefined due to missing position output from the
vertex/geometry shader.
Tested with piglit test glsl-1.50-geometry-primitive-id-restart.
Also tested with full MTT glretrace and piglit.
v2: As suggested by Roland, to properly disable rasterization, besides
setting FS to NULL, we will also need to disable depth and stencil test.
v3: As suggested by Brian, set SVGA_NEW_DEPTH_STENCIL_ALPHA dirty bit
in svga_bind_rasterizer_state() if the rasterizer_discard flag is
changed.
Reviewed-by: Brian Paul <brianp@vmware.com>
Emulating wide points in geometry shader when doing transform feedback
is problematic. This patch disables the emulation.
Tested with piglit test ext_transform_feedback-points.
Also tested with MTT glretrace, mesa demos pointblast and spriteblast.
Reviewed-by: Brian Paul <brianp@vmware.com>
To work with addr2line.sh we also need the relative offset within the
DSO. And addr2line.sh gets confused by the leading stackframe number.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
mako is already a mesa build requirement, extra copy not needed.
Tested building against mesa build baseline (mako-0.8.0).
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
This reverts commit 658568941d.
With the help of shader variants we can render to rb-swapped
formats now. Fixes about 60 piglits.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
If we render to rb swapped format we will create a shader variant doing
the involved swizzing in the pixel shader.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
If shader-db run, create a standard variant immediately
(as otherwise nothing will trigger the shader to be
actually compiled).
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
In the long run the compiler needs to know the specifc variant
'key' in order to compile appropriate assembly. With this commit
the variant knows its shader and we are able pass the preallocated
variant into etna_compile_shader(..). This saves us from passing
extra ptrs everywhere.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
This commit adds some basic infrastructure to handle shader
variants. We are still creating exactly one shader variant
for each shader.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Require LLVM 5.0 or later because LLVM 4.0 is easily fooled into
putting the lane select of llvm.amdgcn.readlane into a VGPR and then
fails to continue to compile.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Notably, llvm.amdgcn.readfirstlane and llvm.amdgcn.icmp may be hoisted
out of loops or if/else branches in cases like
if (cond) {
v = readFirstInvocationARB(x);
... use v ...
} else {
v = readFirstInvocationARB(x);
... use v ...
}
===>
v = readFirstInvocationARB(x);
if (cond) {
... use v ...
} else {
... use v ...
}
The optimization barrier is a heavy hammer to stop that until LLVM
is taught the semantics of the intrinsic properly.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
LLVM will lift inline assembly out of if-else-blocks if both paths have
the same inline assembly. Prevent this by adding an irrelevant unique
text to the assembly.
This requires the LLVM assembly parser to be initialized.
Furthermore, allow forcing subsequent computations to happen after the
optimization barrier by defining a data dependency.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
