Virtual address is used for PIPE_QUERY_SO* queries in
r600_emit_query_begin, but not in r600_emit_query_end.
This will trigger a GPU fault when one of those queries is
made and virtual address is enabled.
Note: this is a candidate for the 9.1 branch
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize out parts of the render target that are scissored out by taking
into account maximal scissor bounds in fd_gmem_render_tiles().
This is a big win on things like gnome-shell which frequently do partial
screen updates.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Fixes assign instead of compare defects reported by Coverity.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
And use this (and the code for r11g11b10 packed float to float conversion)
in the soa texturing code (the generated code looks quite good).
Should be an order of magnitude faster probably than using the fallback
(not measured).
Tested with piglit texwrap GL_EXT_packed_float and
GL_EXT_texture_shared_exponent respectively (didn't find much else using
it).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The blit-based paths for TexImage, GetTexImage, and ReadPixels aren't very
fast with software rasterizer. Now Gallium drivers have the ability to turn
them off.
Reviewed-by: Brian Paul <brianp@vmware.com>
Tested-by: Brian Paul <brianp@vmware.com>
New conversion code to handle conversion from/to r11g11b10 AoS to/from
SoA floats, and also add code for conversion from rgb9e5 AoS to float SoA
(which works pretty much the same as r11g11b10 except for the packing).
(This code should also be used for texture sampling instead of
relying on u_format conversion but it's not yet, so rgb9e5 is unused.)
Unfortunately a crazy amount of hacks is necessary to get the conversion
code running in llvmpipe's generate_unswizzled_blend, which isn't well
suited for formats where the storage representation has nothing to do
with what's needed for blending (moreover, the conversion will convert
from packed AoS values, which is the storage format, to float SoA values,
because this is much more natural for the conversion, and likewise from
SoA values to packed AoS values - but the "blend" (which includes
trivial things like partial mask) works on AoS values, so incoming fs
values will go SoA->AoS, values from destination will go packed
AoS->SoA->AoS, then do blend, then AoS->SoA->packed AoS which probably
isn't the most efficient way though the shuffles are probably bearable).
Passes piglit fbo-blending-formats (with GL_EXT_packed_float parameter),
still need to verify Inf/NaNs (where most of the complexity in the
conversion comes from actually).
v2: drop the (very bogus) rgb9e5 part, and do component extraction
in the helper code for r11g11b10 to float conversion, making the code
slightly more compact (suggested by Jose), now that there are no other
callers left this works quite well. (Could do the same for the
opposite way but it's less than ideal there, final part of packing
needs to be done in caller anyway and there'd be another conditional.)
v3: minor style and comment fixes. Also fix a potential issue with
negative zero being potentially returned by max(src, zero) as we
don't have well-defined min/max behavior (fortunately no additonal cost).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
This helps minimize confusion / effort when moving between branches or
helping others.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <maraeo@gmail.com>
Fixes random failures with piglit glsl-max-varyings.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Christian König <christian.koenig@amd.com>
This makes it possible to identify gl_TexCoord and gl_PointCoord
for drivers where sprite coordinate replacement is restricted.
The new PIPE_CAP_TGSI_TEXCOORD decides whether these varyings
should be hidden behind the GENERIC semantic or not.
With this patch only nvc0 and nv30 will request that they be used.
v2: introduce a CAP so other drivers don't have to bother with
the new semantic
v3: adapt to introduction gl_varying_slot enum
The commit changed API in a helper library shared by both egl_dri2 and
the gallium egl state tracker, but only egl_dri2 was updated to use the
new interface.
Tested-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Doesn't exist on the asic and will cause a CS rejection
if VM is disabled.
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use vmw_printf() just for extra debugging info (off by default).
Use vmw_error() for real errors/failures/etc that we definitely
want to report.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
NOTE: This is a candidate for the 9.1 branch.
Tested-by: Vincent Lejeune <vljn@ovi.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
If we're in some conditional or loop we must not return, or the code
after the condition is never executed.
(v2): And, we also can't just continue as nothing happened, since the
mask update code would later check if we actually have a mask, so we
need to remember that there was a return in main where we didn't exit
(to illustrate this, a ret in a if clause would cause a mask update
which is still ok as we're in a conditional, but after the endif the
mask update code would drop the mask hence bringing execution back to
pixels which should have their execution mask set to zero by the ret).
Thanks to Christoph Bumiller for figuring this out.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=62357.
Note: This is a candidate for the stable branches.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
v2: remove superfluous mask, use buffer_size instead of constant
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Cleanup the code and implement indirect addressing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
To further improve the optimization of source and destination
indirect addressing we need the ability to store a reference
to the declaration of the addressed operands.
Since most of the fields in tgsi_src_register doesn't apply for
an indirect addressing operand replace it with a separate
tgsi_ind_register structure and so make room for extra information.
v2: rename Declaration to ArrayID, put the ArrayID into () instead of []
Signed-off-by: Christian König <christian.koenig@amd.com>
Remember which declarations are declared as "arrays" and so
can be indirectly addressed. ArrayIDs start at 1, cause for
compatibility reasons zero is treaded as no array present.
Signed-off-by: Christian König <christian.koenig@amd.com>
Don't bother with free temporaries, just allocate them at
the end and also emit them in their own declaration.
Signed-off-by: Christian König <christian.koenig@amd.com>
Instead of emitting each temporary separately, emit them in a chunk.
v2: keep separate function for emitting temps
Signed-off-by: Christian König <christian.koenig@amd.com>
Needs to be set for depth, stencil, and fmask just
like other blocks.
v2: drop additional cayman bits for now
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On cayman, 128bpp surfaces require non_disp ordering for hw
access to both linear and tiled surfaces. When we use the 3D
engine we can set the non_disp ordering on both the tiled and
linear sides (via CB or texture), but when we use the DMA
engine, we can only set the non_disp ordering on the tiled
side, so after a L2T operation with the DMA engine, the data
ends up in the wrong order on the tiled side.
v2: cayman/TN only
v3: fix comments
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=60802
Note: this is a candidate for the 9.1 branch.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Andreas Boll <andreas.boll.dev@gmail.com>
- Fix formatting - use one CFLAG per line
NOTE: This is a candidate for the 9.1 branch.
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59238
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
This involved adding another driOptionCache to dri_screen. The
existing one just held the default values. But now we also need
to have the values from the DRI config file so that we can get at
the always_have_depth_buffer config option, which is per-screen.
wayland_roundtrip() was given an incorrect parameter.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=62362
Note: This is a candidate for the stable branches.
Signed-off-by: Brian Paul <brianp@vmware.com>
