Fix build error.
CC vulkan/vulkan_libvulkan_common_la-anv_device.lo
In file included from vulkan/anv_device.c:33:0:
vulkan/anv_device.c: In function ‘anv_AllocateMemory’:
vulkan/anv_device.c:1562:37: error: ‘struct anv_device’ has no member named ‘instace’; did you mean ‘instance’?
result = vk_errorf(device->instace, device,
^
vulkan/anv_private.h:317:17: note: in definition of macro ‘vk_errorf’
__vk_errorf(instance, obj, REPORT_OBJECT_TYPE(obj), error,\
^~~~~~~~
Fixes: 9775894f10 ("anv: Move size check from anv_bo_cache_import() to caller (v2)")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
This change prepares for VK_ANDROID_native_buffer. When the user imports
a gralloc hande into a VkImage using VK_ANDROID_native_buffer, the user
provides no size. The driver must infer the size from the internals of
the gralloc buffer.
The patch is essentially a refactor patch, but it does change behavior
in some edge cases, described below. In what follows, the "nominal size"
of the bo refers to anv_bo::size, which may not match the bo's "actual
size" according to the kernel.
Post-patch, the nominal size of the bo returned from
anv_bo_cache_import() is always the size of imported dma-buf according
to lseek(). Pre-patch, the bo's nominal size was difficult to predict.
If the imported dma-buf's gem handle was not resident in the cache, then
the bo's nominal size was align(VkMemoryAllocateInfo::allocationSize,
4096). If it *was* resident, then the bo's nominal size was whatever
the cache returned. As a consequence, the first cache insert decided the
bo's nominal size, which could be significantly smaller compared to the
dma-buf's actual size, as the nominal size was determined by
VkMemoryAllocationInfo::allocationSize and not lseek().
I believe this patch cleans up that messy behavior. For an imported or
exported VkDeviceMemory, anv_bo::size should now be the true size of the
bo, if I correctly understand the problem (which I possibly don't).
v2:
- Preserve behavior of aligning size to 4096 before checking. [for
jekstrand]
- Check size with < instead of <=, to match behavior of commit c0a4f56
"anv: bo_cache: allow importing a BO larger than needed". [for
chadv]
This will allow us to implement VK_ANDROID_native_buffer without dup'ing
the fd. We must close the fd in VK_KHR_external_memory_fd, but we should
not in VK_ANDROID_native_buffer.
v2:
- Add missing close(fd) for case
VK_EXTERNAL_SEMAPHORE_HANDLE_TYPE_OPAQUE_FD_BIT_KHR, subcase
ANV_SEMAPHORE_TYPE_BO.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
If this flag is set, then the image and the bo have the same lifetime.
vkDestroyImage will release the bo.
We need this for VK_ANDROID_native_buffer, because that extension
creates the VkImage *and* imports its memory during the same
call, vkCreateImage.
v2: Rebase onto VK_KHR_bind_memory2.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In src/intel/vulkan/*, redirect all instances of printf, vk_error,
anv_loge, anv_debug, anv_finishme, anv_perf_warn, anv_assert, and their
many variants to the new intel_log functions. I believe I caught them
all.
The other subdirs of src/intel are left for a future exercise.
v2:
- Rebase onto Tapani's VK_EXT_debug_report changes.
- Drop unused #include <cutils/log.h>.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In the early days of the Vulkan driver, we thought it would be a good
idea to just make genN just fall back to the genN-1 code if it didn't
need to be any different for genN. While this seemed like a good idea,
it ultimately ended up being far simpler to just recompile everything.
We haven't been using the fall-through functionality for some time so
we're better off just deleting it so it doesn't accidentally start
causing problems.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
ssize_t is a GNU extension and is not available on Windows or MacOS.
Instead, we use intptr_t which should be effectively equivalent and is
part of the C standard. This should fix the Windows and Mac OS builds.
Fixes: 3af1c82989
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103253
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>
This is a lot more natural than special casing it all over the place.
We still have to do a bit of special-casing in assign_constant_locations
but it's not special-cased quite as bad as it was before.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that the only thing we put in the array up-front are client push
constants, we can simplify anv_pipeline_compile a bit.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before, we were calculating up-front and then filling in later. Now we
just grow as needed in anv_nir_apply_pipeline_layout.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This way any image uniforms end up having locations higher than
MAX_PUSH_CONSTANT_SIZE. There's no bug here at the moment, but this
consistency will make the next commit easier. Also, because
nir_apply_pipeline_layout properly increments nir->num_uniforms when
it expands the param array, we no longer need to stomp it to match
prog_data::nr_params because it already does.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of making the caller of brw_compile_cs add something to the
param array for thread_local_id_index, just add it on-demand in
brw_nir_intrinsics and grow the array. This is now safe to do because
everyone is now using ralloc for prog_data::param.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vulkan driver does not support pull constants. It simply limits
things such that we can always push everything. Previously, we were
determining whether or not to push things based on whether or not the
prog_data::pull_param array is non-null. This is rather hackish and
about to stop working.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This way we stop leaking it. This is completely safe because, when we
hand it off to anv_shader_bin_create or anv_pipeline_cache_upload_kernel,
they make a copy of the entire param array.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This lets us avoid some of the manual ralloc stealing and prepares for
future commits in which we will want to ralloc prog_data::param.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This burns an extra 10k of memory or so in the case where you don't have
any images. However, if you have several shaders which use images, this
should be much less memory. It also gets rid of a part of prog_data
that really has nothing to do with the compiler.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This moves us away to the array of pointers model and onto a model where
each param is represented by a generic uint32_t handle. We reserve 2^16
of these handles for builtins that get generated by somewhere inside the
compiler and have well-defined meanings. Generic params have handles
whose meanings are defined by the driver.
The primary downside to this new approach is that it moves a little bit
of the work that we would normally do at compile time to draw time. On
my laptop this hurts OglBatch6 by no more than 1% and doesn't seem to
have any measurable affect on OglBatch7. So, while this may come back
to bite us, it doesn't look too bad.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This gets rid of all of our hand-rolled size calculation and
serialization code and replaces it with safe "standards" that are used
elsewhere in anv and mesa. This should be significantly safer than
rolling our own.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Rather than relying on size = stride * height, we can rely on
anv_image's total size.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
This assert was firing just running demos.
Jason said it should be this.
Fixes: 6c7720ed78 (anv/wsi: Allocate enough memory for the entire image)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Previously, we allocated memory for image->plane[0].surface.isl.size
which is great if there is no compression. However, on BDW, we can do
CCS_D on X-tiled images so we also have to allocate space for the
auxiliary buffer. This fixes hangs in some of the WSI CTS tests and
should also reduce hangs in real applications. In particular, it fixes
the dEQP-VK.wsi.*.incremental_present.* test group.
When we hand the image off to X11 or Wayland, it will ignore the CCS
entirely which is ok because we do a resolve when it's transitioned to
VK_IMAGE_LAYOUT_PRESENT_SRC_KHR.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
All over mesa we include "nir/nir.h", we should probably do the same
here. This fixes the meson build that was broken by the ycbcr series.
Thanks to Dylan for finding the issue.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: f3e91e78a3 ("anv: add nir lowering pass for ycbcr textures")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This ensures that everything gets cleaned up properly. In particular,
it fixes a memory leak where we were leaking the push constants
structs.
Valgrind stats on
dEQP-VK.pipeline.push_constant.graphics_pipeline.range_size_128 :
Before:
HEAP SUMMARY:
in use at exit: 2,467,513 bytes in 1,305 blocks
total heap usage: 697,853 allocs, 696,530 frees, 138,466,600 bytes allocated
LEAK SUMMARY:
definitely lost: 1,068 bytes in 11 blocks
indirectly lost: 24,669 bytes in 412 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 2,441,776 bytes in 882 blocks
suppressed: 0 bytes in 0 blocks
After:
HEAP SUMMARY:
in use at exit: 2,467,381 bytes in 1,304 blocks
total heap usage: 697,853 allocs, 696,531 frees, 138,466,600 bytes allocated
LEAK SUMMARY:
definitely lost: 936 bytes in 10 blocks
indirectly lost: 24,669 bytes in 412 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 2,441,776 bytes in 882 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.2 17.1" <mesa-stable@lists.freedesktop.org>
When writing to set > 0, we were just wrongly writing to set 0. This
commit fixes this by lazily allocating each set as we write to them.
We didn't go for having them directly into the command buffer as this
would require an additional ~45Kb per command buffer.
v2: Allocate push descriptors from system memory rather than in BO
streams. (Lionel)
Cc: "17.2 17.1" <mesa-stable@lists.freedesktop.org>
Fixes: 9f60ed98e5 ("anv: add VK_KHR_push_descriptor support")
Reported-by: Daniel Ribeiro Maciel <daniel.maciel@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This change introduce the concept of planes for image & views. It
matches the planes available in new formats.
We also refactor depth & stencil support through the usage of planes
for the sake of uniformity. In the backend (genX_cmd_buffer.c) we have
to take some care though with regard to auxilliary surfaces.
Multiplanar color buffers can have multiple auxilliary surfaces but
depth & stencil share the same HiZ one (only store in the depth
plane).
v2: by Jason
Remove unused aspect parameters from anv_blorp.c
Assert when attempting to resolve YUV images
Drop redundant logic for plane offset in make_surface()
Rework anv_foreach_plane_aspect_bit()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A good chunk of anv_blorp just wants the aux usage from the image. This
magic aux_usage value means just that.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This pass implements all the implicit conversions required by the
VK_KHR_sampler_ycbcr_conversion specification.
It also inserts plane sources onto sampling instructions that we then
let the pipeline layout pass deal with, when mapping things correctly
to descriptors.
v2: Add new file to meson build (Lionel)
Use nir_frcp() rather than (1.0f / x) (Jason)
Reuse nir_tex_instr_dest_size() rather than handwritten one (Jason)
Return progress (Jason)
Account for array of samplers (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
New settings from the KHR_sampler_ycbcr_conversion specifications
might require different sampler settings for luma and chroma planes.
This change makes the sampler table emission ready to handle multiple
planes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Adding new downsampling factors for each planes.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A given Vulkan format can now be decomposed into a set of planes. We
now use 'struct anv_format_plane' to represent the format of those
planes.
v2: by Jason
Rename anv_get_plane_format() to anv_get_format_plane()
Don't rename anv_get_isl_format()
Replace ds_fmt() by fmt2()
Introduce fmt_unsupported()
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Newer format enums start at offset 1000000000, making it impossible to
have them all in one table. This change splits the formats into sets
that we then access through indirection.
v2: rename format_extract to vk_to_anv_format (Chad/Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is just legacy cruft. We don't push these values; we pass them in
as vertex attributes.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The dstOffset and fillSize parameters must be multiple of 4.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.1 17.2" <mesa-stable@lists.freedesktop.org>
The vkCmdFillBuffer() command fills a buffer with an uint32_t value.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.1 17.2" <mesa-stable@lists.freedesktop.org>
