Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
All conversion opcodes require a destination size but this makes
constructing certain algebraic expressions rather cumbersome. This
commit adds support to nir_search and nir_algebraic for writing
conversion opcodes without a size. These meta-opcodes match any
conversion of that type regardless of destination size and the size gets
inferred from the sizes of the things being matched or from other
opcodes in the expression.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Before this commit, there were two copies of the algorithm: one in C,
that we would use to figure out what bit-size to give the replacement
expression, and one in Python, that emulated the C one and tried to
prove that the C algorithm would never fail to correctly assign
bit-sizes. That seemed pretty fragile, and likely to fall over if we
make any changes. Furthermore, the C code was really just recomputing
more-or-less the same thing as the Python code every time. Instead, we
can just store the results of the Python algorithm in the C
datastructure, and consult it to compute the bitsize of each value,
moving the "brains" entirely into Python. Since the Python algorithm no
longer has to match C, it's also a lot easier to change it to something
more closely approximating an actual type-inference algorithm. The
algorithm used is based on Hindley-Milner, although deliberately
weakened a little. It's a few more lines than the old one, judging by
the diffstat, but I think it's easier to verify that it's correct while
being as general as possible.
We could split this up into two changes, first making the C code use the
results of the Python code and then rewriting the Python algorithm, but
since the old algorithm never tracked which variable each equivalence
class, it would mean we'd have to add some non-trivial code which would
then get thrown away. I think it's better to see the final state all at
once, although I could also try splitting it up.
v2:
- Replace instances of "== None" and "!= None" with "is None" and
"is not None".
- Rename first_src to first_unsized_src
- Only merge the destination with the first unsized source, since the
sources have already been merged.
- Add a comment explaining what nir_search_value::bit_size now means.
v3:
- Fix one last instance to use "is not" instead of !=
- Don't try to be so clever when choosing which error message to print
based on whether we're in the search or replace expression.
- Fix trailing whitespace.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
This requires that we rework the interface a bit to use nir_builder but
that's a nice little modernization anyway.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
The previous code always compared integers as 64-bit. Due to variations
in sign-extension in the code generated by nir_opt_algebraic.py, this
meant that nir_search doesn't always do what you want. Instead, 32-bit
values should be matched as 32-bit and 64-bit values should be matched
as 64-bit. While we're here we unify the unsigned and signed paths.
Now that we're using the right bit size, they should be the same since
the only difference we had before was sign extension.
This gets the UE4 bitfield_extract optimization working again. It had
stopped working due to the constant 0xff00ff00 getting sign-extended
when it shouldn't have.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
This is more correct and should also be a tiny bit faster since we're
just comparing pointers instead of calling nir_src_equal.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
I don't want src_is_bool() and src_is_type(x, nir_type_bool) to behave
differently. Having the logic spread out over three functions makes it
harder to decide where to put new logic, as well.
So, combine them all. It's a bit simpler because there's now only one
recursive function rather than a pair of mutually recursive functions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently, 'a@type' can only match if 'a' is produced by an ALU
instruction. This is rather limited - there are other cases we
can easily detect which we should handle.
Extending the code in-place would be fairly messy, so we introduce
a new src_is_type() helper.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Some optimizations, like converting integer multiply/divide into left/
right shifts, have additional constraints on the search expression.
Like requiring that a variable is a constant power of two. Support
these cases by allowing a fxn name to be appended to the search var
expression (ie. "a#32(is_power_of_two)").
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There seemed to be missing one break in nested switchcases.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Antia Puentes <apuentes@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
%ld and %lu aren't the right format specifiers for int64_t and uint64_t
on 32-bit (x86) systems. They're %zu on Linux and %Iu on Windows.
Use the standard C99 macros in hopes that they work everywhere.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
In the first pass of implementing exact handling, I made a mistake with
search-and-replace. In particular, we only reallly handled exact/inexact
on the root of the tree. Instead, we need to check every node in the tree
for an exact/inexact match. As an example of this, consider the following
GLSL code
precise float a = b + c;
if (a < 0) {
do_stuff();
}
In that case, only the add will be declared "exact" and an expression that
looks for "b + c < 0" will still match and replace it with "b < -c" which
may yield different results. The solution is to simply bail if any of the
values are exact when matching an inexact expression.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In many places, the convention is to pass an existing ssadef name ptr
when construction/initializing a new nir_ssa_def. But that goes badly
(as noticed by garbage in nir_print output) when the original string
gets freed.
Just use ralloc_strdup() instead, and add ralloc_free() in the two
places that would care (not that the strings wouldn't eventually get
freed anyways).
Also fixup the nir_search code which was directly setting ssadef->name
to use the parent instruction as memctx.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When we replace an expresion we have to compute bitsize information for the
replacement. We do this in two passes to validate that bitsize information
is consistent and correct: first we propagate bitsize from child nodes to
parent, then we do it the other way around, starting from the original's
instruction destination bitsize.
v2 (Iago):
- Always use nir_type_bool32 instead of nir_type_bool when generating
algebraic optimizations. Before we used nir_type_bool32 with constants
and nir_type_bool with variables.
- Fix bool comparisons in nir_search.c to account for bitsized types.
v3 (Sam):
- Unpack the double constant value as unsigned long long (8 bytes) in
nir_algrebraic.py.
v4 (Sam):
- Use helpers to get type size and base type from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
v2: Squash multiple commits addressing the new parameter in different
files so we don't break the build (Iago)
v3: Fix tgsi (Samuel)
v4: Fix nir_clone.c (Samuel)
v5: Fix vc4 and freedreno (Iago)
v6 (Sam)
- Fix build errors in nir_lower_indirect_derefs
- Use helper to get type size from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
