This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The pass did not correctly handle loops ending in:
if ssa_7 {
block block_8:
/* preds: block_7 */
continue
/* succs: block_1 */
} else {
block block_9:
/* preds: block_7 */
break
/* succs: block_11 */
}
The break will get eliminated by another opt but if this pass gets
called first (as it does on RADV) we ended up inserting
instructions after the break.
Fixes: 5921a19d4b ("nir: add if opt opt_if_loop_last_continue()")
Reviewed-by: Dave Airlie <airlied@redhat.com>
Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
We cannot use nir_build_alu() to create the new alu as it has no
way to know how many components of the src we will use. This
results in it guessing the max number of components from one of
its inputs.
Fixes the following CTS tests:
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_frag
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_geom
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_tessc
dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order_vert
Fixes: 2975422ceb ("nir: propagates if condition evaluation down some alu chains")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We need to update the cursor before we check if the alu use is
dominated by the if condition. Previously we were checking if
the current location of the alu instruction was dominated by
the if condition which would miss some optimisation opportunities.
Fixes: a3b4cb3458 ("nir/opt_if: Rework condition propagation")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of doing our own constant folding, we just emit instructions and
let constant folding happen. This is substantially simpler and lets us
use the nir_imm_bool helper instead of dealing with the const_value's
ourselves.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2:
- only allow nir_op_inot or nir_op_b2i when alu input is 1.
- use some helpers as suggested by Jason.
v3:
- evaluate alu op for single input alu ops
- add helper function to decide if to propagate through alu
- make use of nir_before_src in another spot
shader-db IVB results:
total instructions in shared programs: 9993483 -> 9993472 (-0.00%)
instructions in affected programs: 1300 -> 1289 (-0.85%)
helped: 11
HURT: 0
total cycles in shared programs: 219476091 -> 219476059 (-0.00%)
cycles in affected programs: 7675 -> 7643 (-0.42%)
helped: 10
HURT: 1
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since we know what side of the branch we ended up on we can just
replace the use with a constant.
All the spill changes in shader-db are from Dolphin uber shaders,
despite some small regressions the change is clearly positive.
V2: insert new constant after any phis in the
use->parent_instr->type == nir_instr_type_phi path.
v3:
- use nir_after_block_before_jump() for inserting const
- check dominance of phi uses correctly
v4:
- create some helpers as suggested by Jason.
v5 (Jason Ekstrand):
- Use LIST_ENTRY to get the phi src
shader-db results IVB:
total instructions in shared programs: 9999201 -> 9993483 (-0.06%)
instructions in affected programs: 163235 -> 157517 (-3.50%)
helped: 132
HURT: 2
total cycles in shared programs: 231670754 -> 219476091 (-5.26%)
cycles in affected programs: 143424120 -> 131229457 (-8.50%)
helped: 115
HURT: 24
total spills in shared programs: 4383 -> 4370 (-0.30%)
spills in affected programs: 1656 -> 1643 (-0.79%)
helped: 9
HURT: 18
total fills in shared programs: 4610 -> 4581 (-0.63%)
fills in affected programs: 374 -> 345 (-7.75%)
helped: 6
HURT: 0
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Only used, when asserts are enabled.
Fixes an unused-variable warning with gcc-8:
../../../src/compiler/nir/nir_opt_if.c: In function 'opt_peel_loop_initial_if':
../../../src/compiler/nir/nir_opt_if.c:109:15: warning: unused variable 'prev_block' [-Wunused-variable]
nir_block *prev_block =
^~~~~~~~~~
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
There always is a continue block, so let us just do unreachable.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 8cacf38f52 "nir: Do not use continue block after removing it."
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107312
Reinserting code directly before a jump means the block gets split
and merged, removing the original block and replacing it in the
process.
Hence keeping a pointer to the continue block over a reinsert
causes issues.
This code changes nir_opt_if to simply look for the new continue
block.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107275
CC: 18.1 <mesa-stable@lists.freedesktop.org>
It wasn't causing problems since there's nothing to delete, but better
be consistent with the rest of existing codebase.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Now that SSA values can be derefs and they have special rules, we have
to be a bit more careful about our LCSSA phis. In particular, we need
to clean up in case LCSSA ended up creating a phi node for a deref.
This fixes validation issues with some Vulkan CTS tests with the new
deref instructions.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This pass detects potential loop terminators and moves intructions
from the non breaking branch after the if-statement.
This enables both the new opt_if_simplification() pass and loop
unrolling to potentially progress further.
Unexpectedly this change speed up shader-db run times by ~3%
Ivy Bridge shader-db results (all changes in dolphin/ubershaders):
total instructions in shared programs: 9995662 -> 9995338 (-0.00%)
instructions in affected programs: 87845 -> 87521 (-0.37%)
helped: 27
HURT: 0
total cycles in shared programs: 230931495 -> 230925015 (-0.00%)
cycles in affected programs: 56391385 -> 56384905 (-0.01%)
helped: 27
HURT: 0
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This pass turns:
if (cond) {
} else {
do_work();
}
into:
if (!cond) {
do_work();
} else {
}
Here's the vkpipeline-db stats (from affected shaders) on Polaris10:
Totals from affected shaders:
SGPRS: 17272 -> 17296 (0.14 %)
VGPRS: 18712 -> 18740 (0.15 %)
Spilled SGPRs: 1179 -> 1142 (-3.14 %)
Code Size: 1503364 -> 1515176 (0.79 %) bytes
Max Waves: 916 -> 911 (-0.55 %)
This pass only affects Serious Sam 2017 (Vulkan) on my side. The
stats are not really good for now. Some shaders look quite dumb
but this will be improved with further NIR passes, like ifs
combination.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When shaders come in from SPIR-V, we handle continue blocks by placing
the contents of the continue inside of a "if (!first_iteration)". We do
this so that we can properly handle the fact that continues in SPIR-V
jump to the continue block at the end of the loop rather than jumping
directly to the top of the loop like they do in NIR. In particular, the
increment step of a simple for loop ends up in the continue block. This
pass looks for this case in loops that don't actually have any continues
and moves the continue contents to the end of the loop instead. We need
this because loop unrolling doesn't work if the increment is inside of a
condition.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
