This was handled in handleTEX(), however the way the logic works, those
extra arguments aren't added on by then, so it did nothing. Instead we
must duplicate that bit here. GK110 appears to complain about
MISALIGNED_GPR, however it's reasonable to believe that GK104 has the
same requirements.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95403
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Cull distances are just a special case of clip distances as far as the
hardware is concerned. Make sure that the relevant "planes" are enabled,
and flip the clip mode to cull for those.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
[imirkin: add enables on nvc0, add nv50 support]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
The pass that st/mesa relies on to combine clip and cull distances has
been reverted, so we can't expose ARB_cull_distance until that is
resolved.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We used to use a meta path on gen8 but we haven't since c7cf17ae75. We
might as well delete the meta path since blorp works on all gens.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We used to use a meta path because blorp didn't support 16x MSAA. Now it
does, so we don't need the meta paths anymore.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We used to use a meta path because blorp didn't support 16x MSAA. Now it
does, so we don't need the meta paths anymore.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The helper was initially created to allow us to set reasonable defaults as
we mutated the brw_blorp_prog_data structure in preparation for NIR. Now
that everything is going through brw_blorp_compile_nir_shader() which fully
fills out the brw_blorp_prog_data structure, we don't need the helper.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
NIR gets kind of awkward when you have a 3-component vector with two floats
and one int. This led to us accidentally going through float for the
sample index. It doesn't hurt anything but it also isn't needed.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The original code-flow tried to map original blorp. This puts things more
where they belong and simplifies some of the logic.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There's no reason to be passing a whole struct around just for a single
boolean. We can create it later when we actually need to use it as a key.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This array allows the push constants to be re-arranged on upload. The
actual arrangement will, eventually, come from the back-end compiler.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Intel hardware does a form of multisample compression that involves an
auxilary surface called the MCS. When an MCS is in use, you have to first
sample from the MCS with a special opcode and then pass the result of that
operation into the next sample instrucion. Normally, we just do this
ourselves in the back-end, but we want to expose that functionality to NIR
so that we can use MCS values directly in NIR-based blorp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is similar to nir_channel except that it lets you grab more than one
channel by providing a mask.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There's no reason for having a macro *and* a python generator. We can
easily just do the whole thing in python. This has the advantage that we
are no longer definining ALU# macros which conflict with the ones in
brw_fs_builder.h.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware packets organize kernel pointers and GRF start by slots that
don't map directly to dispatch width. This means that all of the state
setup code has to re-arrange the data from prog_data into these slots.
This logic has been duplicated 4 times in the GL driver and one more time
in the Vulkan driver. Let's just put it all in brw_fs.cpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we have a persample_shading bit in prog_data we can reduce the
amount the state setup code needs to be looking at the GL state. In
particular, it no longer pulls anything directly out of the
gl_fragment_program and no longer depends on NEW_FRAGMENT_PROGRAM.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit reworks and simplifies the way we handle persample shading in
the shader key and prog_data. The previous approach had three different
key bits that had slightly different and hard-to-decern meanings while the
new bits are far more clear. This commit changes it to two easily
understood bits that communicate everything we need:
1) key->persample_interp: means that the user has requested persample
interpolation through the API. This is equivalent to having
SAMPLE_SHADING enabled and having MIN_SAMPLE_SHADING_VALUE set high
enough that you actually get multiple per-sample invocations.
2) key->multisample_fbo: means that the shader will be running on an
actual multi-sampled framebuffer.
This commit also adds a new "persample_dispatch" bit to prog_data which
indicates that the shader should be run in persample mode. This way the
state setup code doesn't have to look at the fragment program or GL state
and can just pull that data out of the prog_data.
In theory, this shuffle could mean more recompiles. However, in practice,
we were shoving enough state into the key before that we were probably
hitting a recompile on every per-sample shader anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit 5310bca024 added a new "double df"
field to the brw_reg struct, adding an extra 4 bytes of data that isn't
usually initialized (or may contain irrelevant garbage if the struct is
mutated). This means that it's no longer safe to memcmp().
Instead, add a brw_regs_equal() function which ignores the extra df bits
unless they matter. To keep the implementation cheap, we wrap the first
set of fields in a union/struct so that we can use a single DWord
comparison.
v2: Drop unnecessary casts (caught by Francisco Jerez).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This fixes a few dEQP tests like
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_offset.no_qualifiers.default_framebuffer
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Many were already marked as fs_only, but not all. This fixes the
remaining ir_txb entries.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
interpolateAt* can only take input variables or an element of an input
variable array. No structs.
Further, GLSL 4.40 relaxes the requirement to allow swizzles, so enable
that as well.
This fixes the following dEQP tests:
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_sample.negative.interpolate_struct_member
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_centroid.negative.interpolate_struct_member
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_offset.negative.interpolate_struct_member
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
