Now that all the build scripts are compatible with both Python 2 and 3,
we can flip the switch and tell Meson to use the latter.
Since Meson already depends on Python 3 anyway, this means we don't need
two different Python stacks to build Mesa.
Signed-off-by: Mathieu Bridon <bochecha@daitauha.fr>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It looks like it was previously taking the SPIR-V instruction number
directly instead of looking up the constant value.
v2: use vtn_constant_value helper (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From SPIR-V 1.0 spec, section 3.20, "Decoration":
"Stream
Apply to an object or a member of a structure type. Indicates the
stream number to put an output on."
Note the "or", so that means that it is allowed for both a full struct
or a membef or a struct (although the wording is not really ideal, and
somewhat error-prone, imho).
We found this with some Geometry Streams tests for ARB_gl_spirv, where
the full gl_PerVertex is assigned Stream 0 (default value on OpenGL
for gl_PerVertex).
So this commit allows structs to have this Decoration, and sets the
stream at the nir variable if needed.
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: squash two Decoration Stream patches (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
These set the new explicit XFB members on nir_variable.
This is needed to support ARB_gl_spirv, as Vulkan doesn't support
transform feedback.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
also move some of the GLSL builtins over we will need for implementing
some OpenCL builtins
v2: replace NIR_IMM_FP by nir_imm_floatN_t in ported code
fix up changes caused by swizzle rework
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Lightly edited to be valid 'C' code.
Is there a bug open to fix this upstream?
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Allow the capability to be exposed, and convert the new execution mode
into fs state.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes warning:
../../src/compiler/spirv/vtn_variables.c: In function ‘var_decoration_cb’:
../../src/compiler/spirv/vtn_variables.c:1400:12: warning: ‘is_vertex_input’ may be used uninitialized in this function [-Wmaybe-uninitialized]
bool is_vertex_input;
^~~~~~~~~~~~~~~
The code used to set is_vertex_input in all possible codepaths, but
after 23edc5b1ef "spirv: translate default-block uniforms" the
compiler isn't sure all codepaths will initialize the variable.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
OpenCL knows vector of size 8 and 16.
v2: rebased on master (nir_swizzle rework)
rework more declarations with nir_component_mask_t
adjust print_var_decl
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
For one thing, the NIR opcodes for image load/store always take and
return a vec4 value regardless of the image type. We need to fix up
both the source and destination to handle it. For another thing, we
weren't actually setting up a destination in the OpAtomicLoad case.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: mesa-stable@lists.freedesktop.org
There are no fixed sized array arguments in C, those are simply pointers
to unsized arrays and as the size is passed in anyway, just rely on that.
where possible calls are replaced by nir_channel and nir_channels.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Otherwise nir_validate may complain about 8 bit floats, which do not exist.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
If the glsl is something like this:
in vec4 some_input;
interpolateAtCentroid(some_input[idx])
then it now gets generated as if it were:
interpolateAtCentroid(some_input)[idx]
This is necessary because the index will get generated as a series of
nir_bcsel instructions so it would no longer be an input variable. It
is similar to what is done for GLSL in ca63a5ed3e.
Although I can’t find anything explicit in the Vulkan specs to say
this should be allowed, the SPIR-V spec just says “the operand
interpolant must be a pointer to the Input Storage Class”, which I
guess doesn’t rule out any type of pointer to an input.
This was found using the spec/glsl-4.40/execution/fs-interpolateAt*
Piglit tests with the ARB_gl_spirv branch.
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: update after nir_deref_instr land on master. Implemented by
Alejandro Piñeiro. Special thanks to Jason Ekstrand for guidance
at the new nir_deref_instr world.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the SPIR-V 1.0 specification, section 3.32.18, "Atomic
Instructions":
"OpAtomicIDecrement:
<skip>
The instruction's result is the Original Value."
However, we were implementing it, for uniform atomic counters, as a
pre-decrement operation, as was the one available from GLSL.
Renamed the former nir intrinsic 'atomic_counter_dec*' to
'atomic_counter_pre_dec*' for clarification purposes, as it implements
a pre-decrement operation as specified for GLSL. From GLSL 4.50 spec,
section 8.10, "Atomic Counter Functions":
"uint atomicCounterDecrement (atomic_uint c)
Atomically
1. decrements the counter for c, and
2. returns the value resulting from the decrement operation.
These two steps are done atomically with respect to the atomic
counter functions in this table."
Added a new nir intrinsic 'atomic_counter_post_dec*' which implements
a post-decrement operation as required by SPIR-V.
v2: (Timothy Arceri)
* Add extra spec quotes on commit message
* Use "post" instead "pos" to avoid confusion with "position"
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Capability that informs if atomic counters are supported. From SPIR-V
1.0 spec, section 3.7, "Storage Class", item 10 from table:
(Column "Storage Class"):
"AtomicCounter For holding atomic counters. Visible across all
functions of the current invocation. Atomic counter-specific
memory."
(Column "Required Capability"):
"AtomicStorage"
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is convenient when dealing with atomic counter uniforms. The
alternative would be doing that at vtn_handle_atomics.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
When constructing NIR if we have a SPIR-V uint variable and the
storage class is SpvStorageClassAtomicCounter, we store as NIR's
glsl_type an atomic_uint to reflect the fact that the variable is an
atomic counter.
However, we were tweaking the type only for atomic_uint scalars, we
have to do it as well for atomic_uint arrays and atomic_uint arrays of
arrays of any depth.
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: update after deref patches got pushed (Alejandro Piñeiro)
v3: simplify repair_atomic_type (suggested by Timothy Arceri, included
on the patch by Alejandro)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
GLSL types differentiates uint from atomic uint. On SPIR-V the type is
uint, and the variable has a specific storage class. So we need to
tweak the type based on the storage class.
Ideally we would like to get the proper type at vtn_handle_type, but
we don't have the storage class at that moment.
We tweak only the nir type, as is the one that really requires it.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Also initialize it on var_decoration_cb
This is equivalent to nir_variable.offset, used to store the location
an atomic counter is stored at.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This commit completely reworks function calls in NIR. Instead of having
a set of variables for the parameters and return value, nir_call_instr
now has simply has a number of sources which get mapped to load_param
intrinsics inside the functions. It's up to the client API to build an
ABI on top of that. In SPIR-V, out parameters are handled by passing
the result of a deref through as an SSA value and storing to it.
This virtue of this approach can be seen by how much it allows us to
delete from core NIR. In particular, nir_inline_functions gets halved
and goes from a fairly difficult pass to understand in detail to almost
trivial. It also simplifies spirv_to_nir somewhat because NIR functions
never were a good fit for SPIR-V.
Unfortunately, there is no good way to do this without a mega-commit.
Core NIR and SPIR-V have to be changed at the same time. This also
requires changes to anv and radv because nir_inline_functions couldn't
handle deref instructions before this change and can't work without them
after this change.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were only initializing vtn_builder::func for the pre-walk where we
build the CFG. We were only initializing the nir_builder for the later
walk through the instructions even though were were setting b->cursor
for the pre-walk. Let's set both both places so that everything is
consistent. This useful because we handle OpFunctionParameter in the
pre-walk and we're going to need to be able to emit instructions.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that pointers can be derefs and derefs just produce SSA values, we
can convert any pointer to/from SSA.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, pointers fell into two categories: index/offset for UBOs,
SSBOs, etc. and var + access chain for logical pointers. This commit
adds another logical pointer mode that's deref + access chain.
It's tempting to think that we can just replace variable-based pointers
with deref-based or at least replace the access chain with a deref
chain. Unfortunately, there are a few sticky bits that prevent this:
1) We can't return deref-based pointers from OpVariable because those
opcodes may come outside of a function so there's no place to emit
the deref instructions.
2) We can't always use variable-based pointers because we may not
always know the variable. (We do now, but he upcoming function
rework will take that option away.)
3) We also can't replace the access chain struct with a deref. Due to
the re-ordering we do in order to handle loop continues, the derefs
we would emit as part of OpAccessChain may not dominate their uses.
We normally fix this up with nir_repair_ssa but that generates phi
nodes which we don't want in the middle of our deref chains.
All in all, we have no real better option than to support partial access
chains while also re-emitting the deref instructions on the spot.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that push constants are using on-the-fly offsets, we no longer need
to handle access chains in vtn_pointer_to_offset.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Push constants have been a weird edge-case for a while in that they have
explitic offsets but we've been internally building access chains for
them. This mostly works but it means that passing pointers to push
constants through as function arguments is broken. The easy thing to do
for now is to just treat them like UBOs or SSBOs only without a block
index. This does loose a bit of information since we no longer have an
accurate access range and any indirect access will look like it could
read the whole block. Unfortunately, there's not much we can do about
that. Once NIR derefs get a bit more powerful, we can plumb these
through as derefs and be able to reason about them again.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before, we were doing structure splitting in spirv_to_nir.
Unfortunately, this doesn't really work when you think about passing
struct pointers into functions. Doing it later in NIR is a much better
plan.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The only thing still using old-school drefs are function calls.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When SpvDecorationBinding is encountered in the SPIR-V source it now
sets explicit_binding on the nir_variable. This will be used to
determine whether to initialise sampler and image uniforms with the
binding value.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
vtn_variable_mode_image and _sampler are instead replaced with
vtn_variable_mode_uniform which encompasses both of them. In the few
places where it was neccessary to distinguish between the two, the
GLSL type of the pointer is used instead.
The main reason to do this is that on OpenGL it is permitted to put
images and samplers into structs and declare a uniform with them. That
means that variables can now have a mix of uniform, sampler and image
modes so picking a single one of those modes for a variable no longer
makes sense.
This fixes OpLoad on a sampler within a struct which was previously
using the variable mode to determine whether it was a sampler or not.
The type of the variable is a struct so it was not being considered to
be uniform mode even though the member being loaded should be sampler
mode.
The previous code appeared to be using var->interface_type as a place
to store the type of the variable without the enclosing array for
images and samplers. I guess this worked because opaque types can not
appear in interfaces so the interface_type is sort of unused. This
patch removes the overloading of var->interface_type and any places
that needed the type without the array can now just deduce it from
var->type.
v2: squash in this patch the changes to anv/nir (Timothy)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
They are supported by SPIR-V for ARB_gl_spirv.
v2 (changes on top of Nicolai's original patch):
* Handle UniformConstant storage class for uniforms other than
samplers and images. (Eduardo Lima)
* Handle location decoration also for samplers and images. (Eduardo
Lima)
* Rebase update (spirv_to_nir options added, logging changes, and
others) (Alejandro Piñeiro)
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2:
An attempt to support SpvExecutionModeStencilRefReplacingEXT's behavior
also follows, with the interpretation to said mode being we prevent
writes to the built-in FragStencilRefEXT variable when the execution
mode isn't set.
v3:
A more cautious reading of 1db44252d0 led
me to a missing change that would stop (what I later discovered were)
GPU hangs on the CTS test written to exercise this.
v4:
Turn FragStencilRefEXT decoration usage without StencilRefReplacingEXT
mode into a warning, instead of trying to make the variable read-only.
If we are to follow the originating extension on GL, the built-in
variable in question should never be readable anyway.
v5/v6: rebases.
v7:
Fix check for gen9 lost in rebase. (Ilia)
Reduce the scope of the bool used to track whether
SpvExecutionModeStencilRefReplacingEXT was used. Was in shader_info,
moved to vtn_builder. (Jason)
v8:
Assert for fragment shader handling StencilRefReplacingEXT execution
mode. (Caio)
Remove warning logic, since an entry point might not have
StencilRefReplacingEXT execution mode, but the global output variable
might still exist for another entry point in the module. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
After bebe3d626e, b->fail_jump is prepared after vtn_create_builder
which can longjmp(3) to it through its vtx_assert()s. This corrupts
the stack and creates confusing core dumps, so we need to avoid it.
While there, I decided to print the offending values for debugability.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We should stop walking through the CFG when the inner loop's
break block ends up as the same block as the outer loop's
continue block because we are already going to visit it.
This fixes the following assertion which ends up by crashing
in RADV or ANV:
SPIR-V parsing FAILED:
In file ../src/compiler/spirv/vtn_cfg.c:381
block->node.link.next == NULL
0 bytes into the SPIR-V binary
This also fixes a crash with a camera shader from SteamVR.
v2: make use of vtn_get_branch_type() and add an assertion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106090
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106504
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This behaviour was changed in 1e5b09f42f. The commit message
for that says it is just a “tidy up” so my assumption is that the
behaviour change was a mistake. It’s a little hard to decipher looking
at the diff, but the previous code before that patch was:
if (builtin == SpvBuiltInFragCoord || builtin == SpvBuiltInSamplePosition)
nir_var->data.origin_upper_left = b->origin_upper_left;
if (builtin == SpvBuiltInFragCoord)
nir_var->data.pixel_center_integer = b->pixel_center_integer;
After the patch the code was:
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
/* fallthrough */
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
break;
Before the patch origin_upper_left affected both builtins and
pixel_center_integer only affected FragCoord. After the patch
origin_upper_left only affects SamplePosition and pixel_center_integer
affects both variables.
This patch tries to restore the previous behaviour by changing the
code to:
case SpvBuiltInFragCoord:
nir_var->data.pixel_center_integer = b->pixel_center_integer;
/* fallthrough */
case SpvBuiltInSamplePosition:
nir_var->data.origin_upper_left = b->origin_upper_left;
break;
This change will be important for ARB_gl_spirv which is meant to
support OriginLowerLeft.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 1e5b09f42f "spirv: Tidy some repeated if checks..."
