Right now, OpenGL uses the GLSL lowering for shared variables and anv
uses NIR to lower them. For a long time, we've done this weird thing
where we do the NIR lowering unconditionally and then add the SLM sizes
from the two together. This works because one of them will always be 0
but it's a bit sketchy. Let's just move the NIR-based lowering into
anv_pipeline and get rid of the sketch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These vaguely corresponded to the hardware encodings, but that is purely
historical at this point. Reorder them so we stop making things "almost
work" when mixing enums.
The ordering has been closen so that no enum value is the same as a
compatible hardware encoding.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The implementations of the ARB_shader_ballot intrinsics will explicitly
read the flag as a source register.
Reviewed-by: Matt Turner <mattst88@gmail.com>
The implementations of the ARB_shader_group_vote intrinsics will
explicitly write the flag as the destination register.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This actually takes advantage of the newly pushed UBO data, avoiding
pull loads.
Improves performance in GLBenchmark Manhattan 3.1 by:
HSW: ~1%, BDW/SKL/KBL GT2: 3-4%, SKL GT4: 7-8%, APL: 4-5%.
(thanks to Eero Tamminen for these numbers)
shader-db results on Skylake, ignoring programs with spill/fill changes:
total instructions in shared programs: 13963994 -> 13651893 (-2.24%)
instructions in affected programs: 4250328 -> 3938227 (-7.34%)
helped: 28527
HURT: 0
total cycles in shared programs: 179808608 -> 172535170 (-4.05%)
cycles in affected programs: 79720410 -> 72446972 (-9.12%)
helped: 26951
HURT: 1248
LOST: 46
GAINED: 21
Many "Deus Ex: Mankind Divided" shaders which already spilled end up
spill a lot more (about 240 programs hurt, 9 helped). The cycle
estimator suggests this is still overall a win (-0.23% in cycle counts)
presumably because we trade pull loads for fills.
v2: Drop "PULL" environment variable left in for initial debugging
(caught by Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
With UBOs, the answer of "have we decided to push this uniform" gets
a bit more complicated - for one, we have multiple surfaces. This
patch refactors things so we can add the new code in a single place.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This patch starts uploading UBO data via 3DSTATE_CONSTANT_* packets,
and updates the compiler to know that there's extra payload data, so
things continue working. However, it still issues pull loads for all
data. I wanted to separate the two aspects for greater bisectability.
v2: Update for new intel_bufferobj_buffer parameter.
Reviewed-by: Matt Turner <mattst88@gmail.com>
This optimization has been removed on gen10+.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
In 5f2fe9302c is_geminilake was introduced for the differenciate
broxton from geminilake. Unfortunately I failed as verifying that
is_broxton is throughout the code base to mean Gen9lp.
Fixes: 5f2fe9302c ("intel: common: add flag to identify platforms by name")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The hardware applies the same channel enable signals to both halves of
the compressed instruction which will be just wrong under non-uniform
control flow. Fix this by splitting those instructions to SIMD4.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
According to the IVB and HSW PRMs:
"2.When the destination requires two registers and the sources are
indirect, the sources must use 1x1 regioning mode."
So for DF instructions the execution size is not limited by the number
of address registers that are available, but by the EU decompression
logic not handling VxH indirect addressing correctly.
This patch limits the SIMD width to 4 in this case.
v2:
- Fix typo (Matt).
- Fix condition (Curro)
v3:
- Add spec quote (Curro)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v2:
- Change the name to lower_conversions.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Generalize it to lower any unsupported narrower conversion.
v2 (Curro):
- Add supports_type_conversion()
- Reuse existing intruction instead of cloning it.
- Generalize d2x to narrower and equal size conversions.
v3 (Curro):
- Make supports_type_conversion() const and improve it.
- Use foreach_block_and_inst to process added instructions.
- Simplify code.
- Add assert and improve comments.
- Remove redundant mov.
- Remove useless comment.
- Remove saturate == false assert and add support for saturation
when fixing the conversion.
- Add get_exec_type() function.
v4 (Curro):
- Use get_exec_type() function to get sources' type.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Then the SIMD lowering pass will get rid of any compressed instructions with scalar
source (whether force_writemask_all or not) and we avoid hitting the Gen7 region
decompression bug.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Suggested-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
The execution data size is the biggest type size of any instruction
operand.
We will use it to know if the instruction deals with DF, because in Ivy
we need to double the execution size and regioning parameters.
v2:
- Fix typo in commit log (Matt)
- Use static inline function instead of fs_inst's method (Curro).
- Define the result as a constant (Curro).
- Fix indentation (Matt).
- Add braces to nested control flow (Matt).
v3 (Curro):
- Add get_exec_type() and other auxiliary functions and use them to
calculate its size.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Fix bogus 'type != BAD_FILE' check. Fix deduced
execution type for integer vector types. Take destination type as
execution type where there is no valid source. Assert-fail if the
deduced execution type is byte. Move into brw_ir_fs.h header for
consistency with the VEC4 back-end. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_fs.cpp (Browse further)
