This creates a single nir_op_vecn instead of a nir_op_vecn and several
copies.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12469>
Be able to inline uniforms in loop for unrolling it.
Nested loop/if is also supported.
Some example:
for (i = 0; i < count; i++)
...
uniform "count" will be inlined. But note this does not
make sure the loop will be unrolled (ie. count = 1000).
for (i = 0; i < count; i++)
for (j = init; j < 10; j++)
if (type == 2)
...
uniform "count", "init" and "type" will be inlined.
It is intentional to not be too aggressive to add uniforms
to avoid false positive case while be able to support most
common usage.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11950>
Instead of fail in trip count calculation, just don't mark such
kind of variable as induction from the beginning.
Don't bother inline uniform to deal with such kind of variable
either.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11950>
Collect per vector component dependency and lower vector uniform
load to scalar if any component need to be inlined.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11950>
Unless all uniforms in the condition can be inlined we can
lower the if/loop. So we rollback added uniforms when one
of uniforms in a if condition fail to be added.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11950>
A lot of CTS tests write a u8vec4 or an i8vec4 to an SSBO. This results
in a lot of shifts and MOVs. When that pattern can be recognized, the
individual 8-bit components can be packed much more efficiently.
v2: Rebase on b4369de27f ("nir/lower_packing: use
shader_instructions_pass")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
Not only does this eliminate a bunch of unnecessary type converting
MOVs, but it can also enable some SWAR. The
dEQP-VK.spirv_assembly.type.vec3.i8.bitwise_xor_frag test does
something about like:
c = a.x ^ b.x;
d = a.y ^ b.y;
e = a.z ^ b.z;
After this change, it looks more like:
uint t = i8vec3AsUint(a) ^ i8vec3AsUint(b);
c = extract_u8(t, 0);
d = extract_u8(t, 1);
e = extract_u8(t, 2);
On Ice Lake, this results in:
SIMD8 shader: 41 instructions. 1 loops. 3804 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 31 instructions. 1 loops. 2844 cycles. 0:0 spills:fills, 5 sends
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
This eliminates some spurious, size-converting moves. For example, on
Ice Lake this helps dEQP-VK.spirv_assembly.type.vec3.i8.bitwise_xor_frag:
SIMD8 shader: 56 instructions. 1 loops. 4444 cycles. 0:0 spills:fills, 5 sends
SIMD8 shader: 52 instructions. 1 loops. 4164 cycles. 0:0 spills:fills, 5 sends
v2: Condition two of the patterns on !options->lower_extract_byte.
Suggested by Lionel.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9025>
Enabling GVN uncovered a bug where we would crash if the pass
thinking about pushing something into a loop.
Fixes: 6538b3e566 ("nir: add heuristic for instructions in loops with GCM")
Acked-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12242>
This shouldn't do anything but will make testing a later patch easier.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8056>
This reverts commit ad363913e6.
This code was added to be able to compare the output file while porting
the script from python2 to python3, but this has long been finished and
the extra complexity is not needed anymore.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3674>
If a loop is followed by a barrier, the ordering between a load inside
the loop and other memory operations after the barrier may have to be
preserved depending on the type of memory involved. This is relevant
when the memory is writeable by other invocations. In such case, it
is not valid to completely eliminate the loop.
This commit doesn't attempt to precisely catch the barrier case, as
analysis could become too complex. It simply assumes it can't drop
the loops that contain certain types of loads unless those are known
to be safe to reorder (via the access flag).
Fixes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4475
Acked-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9938>
Without this stitch_blocks complains about ending in a jump with a
non-empty block after the inserted body.
I hit this with CTS raytracing tests where we tried to inline a
function that basically ended up being something like
{
ignore_ray_intersection
halt
}
I kept the nop path when possible as that does not leave a mess
for the optimization loop to optimize.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12163>
Need to avoid lowering temps when they are used by other instructions,
like the rt instructions (some of the shader call parameters get
converted to temp variables and we will lower them later with
the explicit io lowering pass as we need to guarantee they will
end up in scratch).
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12162>
gl_FragDepth default value is gl_FragCoord.z so if a shader does:
gl_FragDepth = gl_FragCoord.z
we can drop this assignment.
v2: use nir_ssa_scalar_resolved and don't do this is gl_FragDepth
is wrote multiple times (Jason)
v3: - move to its own pass (Jason)
- handle var = NULL (Rhys)
v4: refactoring (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10697>
Per https://gitlab.freedesktop.org/mesa/mesa/-/issues/5178#note_1019666,
the assumption fundamental to this optimization is false. Section
2.4.1 (Float to Integer) of Ivy Bridge PRMs describes the situation.
The wording of the section is somewhat confusing (because it doesn't
clearly delineate between signed and unsigned integers), but the last
two rows of the table make it clear that F->UD conversion clamps
negative float values to 0.
All other hardware mentioned in that thread seems to behave the same
way.
The real problem is that, with hardware that behaves in this ways,
converting f2u(2147483648.0) to f2i(2147483648.0) changes the bit pattern
that would be produced from 0x80000000 to 0x7fffffff.
This reverts commit ad05920258.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12297>
Otherwise drivers that don't use 16-bit slots for varyings will get
confused and have their driver_locations scribbled over. This has caused
multiple problems for both Panfrost and Asahi this week. Given the only
other user of the pass for varyings is radeonsi, which needs both
together, I think this is the least controversial fix.
Fixes: fb29cef8dd ("nir: add many passes that lower and optimize 16-bit input/outputs and samplers")
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11732>
Both nir_opt_algebraic and nir_opt_idiv_const have optimizations for
umod/imod/irem by constants.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
This lowering is smaller and -INT64_MIN is probably UB (signed overflow).
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
ineg(INT_MIN)/iabs(INT_MIN) won't work as expected.
No fossil-db changes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12039>
