It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>
Section 5.11 (Out-of-Bounds Accesses) of the GLSL 4.60 spec says:
"In the subsections described above for array, vector, matrix and
structure accesses, any out-of-bounds access produced undefined
behavior.... Out-of-bounds writes may be discarded or overwrite
other variables of the active program."
Fixes crashes when dereferencing gl_ClipDistance and gl_TessLevel*, e.g:
int index = -1;
gl_ClipDistance[index] = -1;
When LowerCombinedClipCullDistance is true.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>
Several optimization paths, including constant folding, can lead to
indexing vector with an out of bounds index.
Out-of-bounds writes could be eliminated per spec:
Section 5.11 (Out-of-Bounds Accesses) of the GLSL 4.60 spec says:
"In the subsections described above for array, vector, matrix and
structure accesses, any out-of-bounds access produced undefined
behavior.... Out-of-bounds writes may be discarded or overwrite
other variables of the active program."
Fixes piglit tests:
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-1
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-6
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>
Several optimization paths, including constant folding, can lead to
accessing an ir_constant vector with an out of bounds index.
Return 0 since GL_ARB_robustness and GL_KHR_robustness encourage
us to do so.
Fixes piglit tests:
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-2
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-4
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-5
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2604
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>
The OpenCL image_width/height/depth functions have variants which can
take an LOD parameter. More importantly, LLVM-SPIRV-Translator always
generates OpImageQuerySizeLod even if the LOD is guaranteed to be zero.
Given that over half the hardware out there has an LOD field for image
size queries (based on a rudimentary scan through their NIR -> whatever
code), we may as well just add the source to the NIR intrinsic. If this
is ever a problem for anyone, the lowering is pretty trivial.
I've also added asserts to everyone's drivers that should alert them if
they ever see an LOD other than zero. This will never happen with GL or
Vulkan so there's no need for panic.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6396>
Some drivers need to know which streams are used by a geometry
shader. Adding a mask of active streams makes the use of
UsesStreams superfluous as it's the equivalent of:
ActiveStreamMask != (1 << 0)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5984>
For some unfathomable reason, three out of these four tests often time
out when running within CI. On the assumption that there is some
parallelisation badness happening rather than the non-UNIX tests
entering infinite loops, try just marking them as serial-only.
This should have a negligible impact on runtime since they are quick to
execute.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6301>
Desktop OpenGL ignores all precision qualifiers.
Also, the lowering pass doesn't work if precision qualifiers are not set,
which is only possible with desktop OpenGL, causing random behavior.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6073>
They have an empty fxn body, trying to handle them results in the
intrinsic call being expanded into a no-op.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6073>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6189>
Some hw can narrow 32b const/uniform to 16b on load.. and in particular
lowering constants to 16b would break const->uniform lowering. Allow
them to lower temps to 16b, while skipping consts.
Initially it is set to the same value as LowerPrecisionTemporaries, to
preserve the current behavior.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6189>
Those are now handled by nir_lower_int64() which has native NIR
implementations.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5588>
Now that nir_foreach_variable_with_modes can handle multiple modes at
one time, we can simplify things a bit and only walk the list once.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Instead of having separate lists of variables, roughly sorted by mode,
use a single list for all shader-level NIR variables. This makes a few
list walks a bit longer here and there but list walks aren't a very
common thing in NIR at all. On the other hand, it makes a lot of things
like validation, printing, etc. way simpler. Also, there are a number
of cases where we move variables from inputs/outputs to globals and this
makes it way easier because we no longer have to move them between
lists. We only have to deal with that if moving them from the shader to
a nir_function_impl.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
There are a bunch of cases where we really do want to walk the list that
is nir->uniforms because we want all things declared "uniform" in the
GLSL. Add a helper for this but restrict it to the GL linking code.
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
This one's a bit more complex because it filters off only those
variables with mode == nir_var_uniform. As such, it's not exactly a
drop-in replacement for nir_foreach_variable(var, &nir->uniforms).
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Otherwise a VS doing the following:
out gl_PerVertex {
vec4 gl_Position;
int gl_ViewportIndex;
};
cannot be compiled because of the following error:
"redeclaration of gl_PerVertex must be a subset of the built-in
members of gl_PerVertex"
v2: add GLSL_PRECISION_HIGH param to add_varying() for "gl_Layer" in
generate_fs_special_vars.
v3: add GLSL_PRECISION_HIGH param to add_varying() for "gl_Layer" in
generate_varyings.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2946
Tested-by: John Galt <johngalt@fake.mail>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v3)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v3)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5167>
EXT_shader_image_load_store says:
The format of the image unit must be in the "1x32" equivalence class
otherwise the atomic operation is invalid.
ARB_shader_image_load_store says:
We will only support 32-bit atomic operations on images
Fixes: fc0a2e5d01 ("glsl: add EXT_shader_image_load_store new image functions")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5688>
This is not needed for lowering expressions, because they always work with
basic types, but it will be needed for lowering variables.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5746>
