If we split addr/pred, the original instruction could have originated
from a different block. If we don't fixup the block ptr we hit asserts
later (in debug builds).
NOTE: perhaps we don't want to try to preserve addr/pred reg's across
block boundaries.. this at least needs some thought in case addr/pred
writes end up inside a conditional block..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The address and predicate register are special, they don't get assigned
in RA. So do a better job of ignoring them rather than hitting later
asserts.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Nowhere was it spelled out that the state tracker may expect the pipe
driver to unref the old fence.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
XA was never unref'ing last_fence in the various call paths to
pipe->flush(). Add this to xa_context_flush() and update the other
open-coded calls to pipe->flush() to use xa_context_flush() instead.
This fixes a memory leak reported with xf86-video-freedreno.
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to check what the 3D pipe is able to handle for the mixer, not what
the decoder is able to decode. This fixes output of resolutions like 720x1280.
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: mesa-stable@lists.freedesktop.org
Before validating vertex arrays we need to check if a VBO is present.
Checking if vb->buffer is not NULL fixes the issue.
Fixes the following piglit test:
gl-3.1-vao-broken-attrib
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
According to nv50, this should be src->ms_y instead of src->ms_x. This
code is here since 2012, so it's probably a typo error which has never
been detected since a long time. I didn't do a full piglit run to check
if it fixes some other weird issues.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Freedreno requires {a4xx,ir3}_SOURCES and NIR to build.
Signed-off-by: Varad Gautam <varadgautam@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Fixes the following piglits:
occlusion_query_meta_fragments
occlusion_query_meta_no_fragments
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
This allows drivers to report queries in units of microseconds and
have the HUD display "us" (microseconds), "ms" (milliseconds) or "s"
(seconds) on the graph.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Instead of using a boolean 'is bytes' value, use the pipe_driver_query_type
enum type. This will let is add support for time values in the next patch.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This eliminates the error prone logic in si_shader_vs recalculating this
value.
It also fixes TGSI_SEMANTIC_CLIPDIST outputs incorrectly not being
counted for VS exports. They need to be counted because they are passed
to the pixel shader as parameters as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91193
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The expansion should always be to the same width as the input arguments
no matter what, since these functions should work with any bit width of
the arguments (the sext is a no-op on any sane simd architecture).
Thus, fix the caller expecting differently.
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=91222
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Absolute timeouts are used with the amdgpu kernel driver.
It also makes waiting for several variables and fences at the same time
easier (the timeout doesn't have to be recalculated after every wait call).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This will be used by radeon and amdgpu winsyses.
Copied from the amdgpu winsys.
v2: use volatile and p_atomic_read
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: 10.6 10.5 <mesa-stable@lists.freedesktop.org>
Acked-by: Christian König <christain.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The first argument to UCMP needs to be compared against 0, but the
latter arguments are treated as float and need to be able to properly
apply neg/abs arguments. Adjust the inferSrcType function accordingly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Same problem and fix as for nouveau's ZaphodHeads trouble.
See patch ...
"nouveau: Use dup fd as key in drm-winsys hash table to fix ZaphodHeads."
... for reference.
Cc: "10.3 10.4 10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If an instruction using address register value gets eliminated, we need
to remove it from the indirects list, otherwise it causes mayhem in
sched for scheduling address register usage.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
A handful of fixes and cleanups:
1) If we split addr/pred, we need the newly created instruction to
end up in the unscheduled_list
2) Avoid scheduling a write to the address register if there is no
instruction using the address register that is otherwise ready
to schedule. Note that I currently don't bother with the same
logic for predicate register, since the only instructions using
predicate (br/kill) don't take any other src registers, so this
situation should not arise.
3) few other cosmetic cleanups
Signed-off-by: Rob Clark <robclark@freedesktop.org>
cp would update instr->address but not update the indirects array
resulting in sched getting confused when it had to 'spill' the address
register. Add an ir3_instr_set_address() helper to set instr->address
and also update ir->indirects, and update all places that were writing
instr->address to use helper instead.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need to distinguish a shader that has separate writes to each MRT
from one which is supposed to write the data from MRT 0 to all the MRTs.
In TGSI this is done with a property. NIR doesn't have that, so encode
it as a funny location and decode on the other end.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the immediate form, src2 == dst, so it does not need to be emitted.
Otherwise it overlaps with the immediate value's low bits.
Fixes: 09ee907266 (nv50/ir: Fold IMM into MAD)
Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Prefer blit-based texture transfers only if the chip has dedicated VRAM
since it would translate to a copy into the same memory on shared-memory
chips.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This is required on non-coherent architectures to ensure the value of
the fence is correct at all times. Failure to do this results in the
display freezing for a few seconds every now and then on Tegra.
The NOUVEAU_BO_COHERENT is a no-op for coherent architectures, so behavior
on x86 should not be affected by this patch.
Also bump the required libdrm version to 2.4.62, which introduced this
flag.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
