In preparation to the changes that would allow to not need them.
It is worth to note that it is likely (we have some ideas in mind)
that we would need to bring back pre-generate variants on the
future. The approach is slightly different on v3dv_pipeline vs
v3dv_cmd_buffer:
* v3dv_pipeline: even after the clean-up, we had code for all the
functions they have, even if they were doing less things
(specifically, a second shader variant), so they still make sense
on their own, and serve as template for adding support of multiple
pre-generated shader variants in the future.
* v3dv_cmd_buffer: as we really don't need to fill up the key with
some after-pipeline data, we would end with some functions empty
(specifically cmd_buffer_populate_v3d_key). Even as a placeholder,
that would be odd. Additionally the current code has a lot of
boilerplate code (functions to fill up vs, cs and fs keys are
basically the same), and we already have in mind refactor them. So
it would be better to remove all of them, instead of keeping
around some code we would not be happy with. If in the future we
pregenerate more that one variant, hopefully the new code to chose
between them would be better.
v2: clarify the commit message, and fix typos on the comments (Iago)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7545>
index is of type uint32_t.
Fix defects reported by Coverity Scan.
Macro compares unsigned to 0 (NO_EFFECT)
unsigned_compare: This greater-than-or-equal-to-zero comparison of
an unsigned value is always true. index >= 0U.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7518>
So far, we have only been supporting X11, so we assumed that we were running
inside X11 and would always try to get an authenticated fd from Xorg during
device initialization. While this works for desktop Raspbian, it is not
really correct and it is not what we want to do when we start considering
other WSIs.
Initially, one could think we can still do this by guarding the WSI code
under the proper instance extension check. This, however, doesn't work
reliably, as the Vulkan loader can call vkEnumerateDevices without enabling
surface extensions on the instance, which then can lead to us not
initializing any display_fd and failing with VK_ERROR_INITIALIZATION_FAILED,
which is not correct, so while we can try to acquire the display_fd here,
it might not always work, and we should definitely not fail initialization
of the physical device for that.
Instead, with this change we move acquisition of display_fd to swapchain
creation time where required extensions need to be enabled in the instance.
This was also suggested by Daniel Stone during review of a work-in-progress
implementation for the Wayland WSI.
There is a special case to consider though: applications like Zink that
don't use Vulkan's swapchains at all but still allocate images that they
intend to use for WSI. We need to handle these by checking that we have
indeed acquired a display_fd before doing any memory allocation for WSI,
and acquiring one at that time if that's not the case.
This change also removes the render_fd and display_fd fields from the
logical device (which we were copying from the physical device), because
now there is no guarantee that we have acquired a display_fd at the
time we create a logical device. Instead, we now put a reference to the
physical device on the logical device from which we can access these.
Finally, this also fixes a regression introduced with VK_KHR_display, where
if that extension is enabled but we are running inside a compositor, we would
acquire a display_fd that is not authenticated and try to use that instead
of acquiring an authenticated display_fd from the display server.
Fixes: b1188c9451 (v3dv: VK_KHR_display extension support)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7546>
This cleans up a bunch of gross sprintfs and keeps the caller from needing
to remember to ralloc_strdup. I added a couple of '"%s", name ? name :
""' to radv where I didn't fully trace through whether a non-null name was
being passed in.
I also took the liberty of adding a basic name to a few shaders (pan_blit,
unit tests)
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7323>
When calling GetPhysicalDeviceProperties2 we were ignoring and logging
the structures for extensions not supported. But for the case of
VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PCI_BUS_INFO_PROPERTIES_EXT we
already know that we are not going to support it, so let's just do
nothing (not even logging) when passed.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7497>
We already have vk_error to report errors, they add little specific
v3dv wrapping over a simple fprintf, and they are not used really
often.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7497>
subpass_idx is of type uint32_t.
Fix defects reported by Coverity Scan.
Macro compares unsigned to 0 (NO_EFFECT)
unsigned_compare: This greater-than-or-equal-to-zero comparison of
an unsigned value is always true. subpass_idx >= 0U.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7325>
Now that the R/B swap mask for vertex attributes handles all the
attributes, ensure the right generic vertex attribute is marked.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7196>
It is not used right now, so keeping it adds some noise/confusion.
So far configuring Z test are done through the CFG_BITS. See
v3dX(emit_state) at v3dx_emit.c for v3d, and pack_cfg_bits at
v3dv_pipeline.c for v3dv. There flags like z_updates_enable and others
are filled up.
That key field seems like a leftover coming from using vc4 as
reference, as that driver defines and uses a field with name name.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7421>
If a secondary command buffer has occlusion query inheritance then
draw calls recorded in it should update an active occlusion query
counter started in the primary command buffer.
If executing the secondary in a primary required to emit jobs and
not just a branch instruction, then we might need to create a new
job for the primary as well, and in that case we would lose the
occlusion query state, so we need to re-emit it at that point so
any additional draw calls recorded into the secondary that is being
executed continue to update the counter.
Fixes:
dEQP-VK.query_pool.concurrent_queries.secondary_command_buffer
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7373>
V3D doesn't provide any means to acquire timestamps from the GPU
so we have to implement these in the CPU.
v2: enable timestampComputeAndGraphics and set timestampPeriod (Piñeiro)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7373>
For 3D images we should take the slice to copy from or to, from
the Z coordinate of the corresponding offset, not the base array
layer.
Fixes VK_KHR_maintenance1 tests:
dEQP-VK.api.copy_and_blit.core.image_to_image.3d_images.3d_to_2d_by_slices
dEQP-VK.api.copy_and_blit.core.image_to_image.3d_images.2d_to_3d_by_layers
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7364>
So far for the formats E5B9G9R9_UFLOAT_PACK32 and
B10G11R11_UFLOAT_PACK32 we were using a XYZW swizzle. But from Vulkan
spec those are three-component, without alpha, formats. So we should
use XYZ1 instead, as we were already doing for other three-component
formats.
Curiously the only case where this raised a problem were when using
clamp to border with transparent black. This change allows us to
remove the code that handled only that specific case.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7355>
This is another case of a feature that is implemented in the compiler
and that only required that we set the shader key properly from the
pipeline state, which we were already doing.
I verified we pass the tests in dEQP-VK.pipeline.multisample.alpha_to_one.*
(we only support 4x multisampling, so we can only pass a single test there),
however, the tests seem to have a bug by which they always pass, even if
the driver doesn't actually implement alpha to one correctly. I submitted
a fix to Khronos and verified that we also pass the fixed tests (and that
we failed them if we don't actually set te shader key correctly).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7336>
Our blit shader path allocates a descriptor pool to create
combined image sampler descriptors for blit source images. So
far, we had sized this pool statically and the driver would
fail if we ever need to allocate more descriptors than that.
With this change, we switch to using a dynamic allocation
mechanism instead where we allocate as many pools as we need to
meet descriptor set allocation requirements for the command buffer.
Also, every time a new pool needs to be created, we double its
size (up to a limit), so we can start small and avoid wasting
memory for command buffers that only have a small number of blits,
while trying to keep allocation overhead low for command buffers
that record a lot of blits.
v2: use existing framework for automatic destruction of private
driver objects to free allocated pools.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7311>
For us this is mostly handled in the compiler by a NIR lowering so
for the Vulkan driver we only need to make sure that we program our
shader key correctly from the pipeline state, which we were already
doing.
It doesn't look like CTS has any coverage for this yet so it has only
been smoke tested, but it seems to be working correctly, as expected.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7313>
This key field is only used for V3D versions before 4.1, so it
should not be set for v3dv. Also, it is a mask not a boolean.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
We were computing this too early based on the view's format alone
which is not correct, since we need to consider the view's swizzle
as well.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7271>
If we are blitting to tile boundaries we don't need to emit
tile loads. The exception to this is the case where we are
blitting only a subset of the pixel components in the image
(which we do for single aspect blits of D24S8), since in that
case we need to preserve the components we are not writing.
There is a corner case where some times we create framebuffers
that alias subregions of a larger image. In that case the edge
tiles are not padded and we can't skip the loads.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7247>
Fix defect reported by Coverity Scan.
Assign instead of compare (PW.ASSIGN_WHERE_COMPARE_MEANT)
assign_where_compare_meant: use of "=" where "==" may have been intended
Fixes: ca86c7c65a ("v3dv: assert command buffers are executable when submitting to a queue")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7156>
Fix defect reported by Coverity Scan.
Uninitialized scalar variable (UNINIT)
uninit_use_in_call: Using uninitialized value time.tv_sec when calling free_stale_bos.
Fixes: f78c99f357 ("v3dv/bo: add a maximum size for the bo_cache and a envvar to configure it")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7154>
index is of type uint32_t.
Fix defect reported by Coverity Scan.
Macro compares unsigned to 0 (NO_EFFECT)
unsigned_compare: This greater-than-or-equal-to-zero comparison of
an unsigned value is always true. index >= 0U.
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7153>
Fix defect reported by Coverity Scan.
Assign instead of compare (PW.ASSIGN_WHERE_COMPARE_MEANT)
assign_where_compare_meant: use of "=" where "==" may have been intended
Fixes: c75846e674 ("v3dv: implement DRM modifier setup for WSI")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7124>
The aliasing we were using was not always correct. Particularly,
for 3D images, the simulator would complain about image strides
not being large enough in some cases.
This patch fixes this by aliasing both src and dst images and
carefully choosing the alias dimensions taking into account the
format chosen for the copy and the ratio of block sizes between
both images.
Playing a bit with the image dimensions used by the relevant CTS
tests we confirmed this works well for all tile layouts (lineartile,
ublinear1/2 and UIF).
This fixes all CTS tests involving 3D image copies from compressed
formats without needing to force UIF layout for all compressed
images (which would actually not work for all image sizes either).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
This patch addresses various issues, mostly from secondary command buffers
that recorded pipeline barriers that are not consumed in the secondary itself,
so they need to be applied to jobs that come right after the execution of the
secondary in a primary command buffer.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
If a subpass clears one aspect of Depth/Stencil but loads the other
the clear might get lost. Fix this by emitting the clear as a draw
call instead of relying on the TLB clear.
Fixes:
dEQP-VK.renderpass.suballocation.attachment.3.307
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6766>
