Because apparently layout(max_vertices=0) is a thing.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a428c955ce)
This can occur when max_vertices=0 is explicitly specified.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b27dfa5403)
The string "[0]\0" is the same as "[0]" as far as the C string datatype
is concerned. That string has length 3. strncmp(s, length_3_string, 4)
is the same as strcmp(s, length_3_string), so make it be strcmp.
v2: Not the same as strncmp(..., 3). Noticed by Ilia.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 049bb94d2e)
With the introduction of fp64 and fp16 to nir, there are now a bunch of
float types running around. A F1 2015 shader ends up with an i2f.sat
operation, which has a nir_type_float32 destination. Allow sat on all
the float destination types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit ca135a2612)
I didn't realize there were 1 and 2 RB variants when this code
was originally added.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bd85e4a041)
The initial ARB_sampler_objects spec had GL_INVALID_VALUE in it,
however version 8 of it fixed this, and the GL specs also have
the fixed value in them.
Fixes:
GL45-CTS.texture_border_clamp.samplerparameteri_non_gen_sampler_error
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 6400144041)
Fixes rendering in Shadow of Mordor with rbc. Application writes
RGBA_UNORM texture filling it with values the application wants to
later on treat as SRGB_ALPHA.
Intel driver enables lossless compression for the buffer by the time
of writing. However, the driver fails to make sure the buffer can be
sampled as something else later on and unfortunately there is
restriction in the hardware for using lossless compression for srgb
formats which looks to extend itself to the sampling engine also.
Requesting srgb to linear conversion on top of compressed buffer
results the color values to be pretty much garbage.
Fortunately none of tracked benchmarks showed a regression with
this.
v2 (Matt): Add missing space
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 30e9e6bd07)
We weren't setting up several of the uniform values for the patch
header, so we'd crash when uploading push constants. We at least
need to initialize them to zero. We also had the isoline parameters
reversed, so it would also render incorrectly (if it didn't crash).
Fixes a new Piglit test(*) (isoline-no-tcs), as well as crashes in
GL44-CTS.tessellation_shader.single.max_patch_vertices.
(*) https://lists.freedesktop.org/archives/piglit/2016-May/019866.html
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit a3dc99f3d4)
The driver was adding the skip components but always for buffer 0.
This fixes:
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_skip_multiple_buffers
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit ebb81cd683)
e2791b38b4
mesa/program_interface_query: fix transform feedback varyings.
caused a regression in
GL45-CTS.gtf40.GL3Tests.transform_feedback3.transform_feedback3_multiple_streams
on radeonsi.
The problem was it was using the skip components varying to set
the stream id, when it should wait until a varying was written,
this just adds the varying checks in the right place.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 1fe7bbb911)
According to GL4.5 spec:
An INVALID_OPERATION error is generated if any part of the speci-
fied buffer range is mapped with MapBufferRange or MapBuffer (see sec-
tion 6.3), unless it was mapped with MAP_PERSISTENT_BIT set in the Map-
BufferRange access flags.
So we should use the if range is mapped path.
This fixes:
GL45-CTS.buffer_storage.map_persistent_buffer_sub_data
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: "12.0, 11.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit e891f7cf55)
This really only hits for bitsets with a size of a multiple of 32. We
can end up with pos = -1 as a result of the ffs, which we in turn decide
is a valid position (since we fall through the loop and i == 1, we end
up adding 32 to it, so end up returning 31 again).
Up until recently this was largely unreachable, as the register file
sizes were all 63 or 255. However with the advent of compute shaders
which can restrict the number of registers, this can now happen.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 18d11c9989)
This reverts commit aac90ba292.
The commit caused a regression in:
piglit.spec.glsl-1_50.compiler.gs-input-nonarray-named-block.geom
Also the CTS test it was meant to fix seems like it may be bogus.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 98d40b4d11)
I haven't found any evidence that this isn't supported by the
hardware, in fact according to the SNB hardware spec:
"The supported regioning modes for math instructions are align16,
align1 with the following restrictions:
- Scalar source is supported.
[...]
- Source and destination offset must be the same, except the case of
scalar source."
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit c1107cec44)
This is the case for SNB math instructions so we need to be careful
and insert the literal value of the immediate into the table (rather
than its absolute value) if the instruction is unable to invert the
sign of the constant on the fly.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 06d8765bc0)
Which requires using a bitset instead of a boolean flag to keep track
of the GRFs we've seen a generating instruction for already. The
search loop continues until all instructions initializing the value of
the source VGRF have been found, or it is determined that coalescing
is not possible.
Fixes a few piglit test cases on Gen4-6 which were regressed by
6956015aa5 due to the different (yet
perfectly valid) ordering in which copy instructions are emitted now
by the simd lowering pass, which had the side effect of causing this
optimization pass to start corrupting the program in cases where a
VGRF-to-MRF copy instruction would be eliminated but only the last
instruction writing to the source VGRF region would be rewritten to
point to the target MRF.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 4fe4f6e8a7)
This will be required to correctly transform the destination of 8-wide
instructions that write a single GRF of a VGRF to MRF copy marked
COMPR4.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 1898673f58)
This will allow compute_to_mrf to handle cases where the source of the
VGRF-to-MRF copy is initialized by more than one instruction. In such
cases we cannot rewrite the destination of any of the generating
instructions until it's known whether the whole VGRF source region can
be coalesced into the destination MRF, which will imply continuing the
search until all generating instructions have been found or it has
been determined that the VGRF and MRF registers cannot be coalesced.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 485fbaff03)
Compute-to-mrf was checking whether the destination of scan_inst is
more than one component (making assumptions about the instruction data
type) in order to find out whether the result is being fully copied
into the MRF destination, which is rather inaccurate in cases where a
single-component instruction is only partially contained in the source
region, or when the execution size of the copy and scan_inst
instructions differ. Instead check whether the destination region of
the instruction is really contained within the bounds of the source
region of the copy.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 4b0ec9f475)
Compute-to-mrf was being rather heavy-handed about checking whether
instruction source or destination regions interfere with the copy
instruction, which could conceivably lead to program miscompilation.
Fix it by using regions_overlap() instead of the open-coded and
dubiously correct overlap checks.
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit bb61e24787)
Now there are not files that require python 3, so for now just remove
the python 3 dependency and use python 2. I think the right plan is to
just get all of the python ready for python 3, and then use whatever
python is available.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 604010a7ed)
This fixes gen_pack_header to work on python 2, where name[0] is unicode
not str.
Signed-off-by: Dylan Bake <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 12c1a01c72)
This is a correctness issue.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit e5681e4d70)
This is the default in python3, but in python2 you get old style
classes. No one likes old-style classes.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit de2e9da2e9)
There is unicode in this file, and I'm actually surprised that the
python interpreter hasn't gotten grumpy.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
cc: 12.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9f50e3572c)
This just fixed the crash with the apitrace in bug report.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95246
Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 8a10192b4b)
The CTS test:
GL45-CTS.multi_bind.dispatch_bind_image_textures
binds 192 image uniforms, we reject this later,
but not until after we trash the contents of the
struct gl_shader.
Error now reads:
Too many compute shader image uniforms (192 > 16)
instead of
Too many compute shader image uniforms (2745344416 > 16)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit f87352d769)
Now that vc4 automated code documentation can be generated with
doxygen, fix the warnings issued by Doxygen 1.8.11.
Signed-off-by: Rhys Kidd <rhyskidd@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This patch makes it possible to build classic osmesa/swrast on windows
again. It was removed in commit 69db422218.
Although there is a gallium version of osmesa now, the swrast version
still has more features lacking in llvmpipe, e.g. anisotropic filtering.
Tested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
[Emil Velikov: remove trailing whitespace]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As we'll need the file in the release tarball, rework the rule so that
the file is regenerated _only_ if we're in a git repository.
With this in place we can build vulkan (anv) from a release tarball.
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This way we can reuse the header from other places like -
src/intel/vulkan and src/gallium. Only the former is hooked up atm.
Make sure .gitignore is updated, as well as all the users (the mesa
code does not need any changes).
Also ensure that the file is always created by adding it to the
BUILT_SOURCES target.
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
As is there are two places that do the typedefs - dri_interface.h and
this header. As we cannot include the former in here, just drop the
typedefs and use the struct directly (as needed).
This is required because typedef redefinition is C11 feature which is
not supported on all the versions of GCC used to build mesa.
v2: Kill the typedef alltogether, as per Marek.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96236
Cc: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Rather than checking if the function name maps to a valid entry in the
respective table, just create a dummy entry at the end of each table.
This allows us to remove some unnessesary "index >= 0" checks, which get
executed quite often.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
It will allows us to find the function within 6 attempts, out of the ~80
entry long table.
v2: calculate middle on each iteration, correctly set the lower limit.
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
With reference to the libglvnd branch:
https://cgit.freedesktop.org/mesa/mesa/log/?h=libglvnd
This is a squashed commit containing all of Kyle's commits, all but two
of Emil's commits (to follow), and a small fixup from myself to mark the
rest of the glX* functions as _GLX_PUBLIC so they are not exported when
building for libglvnd. I (ajax) squashed them together both for ease of
review, and because most of the changes are un-useful intermediate
states representing the evolution of glvnd's internal API.
Co-author: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
(a) Make sure to update the TIC in case of an updated buffer address
(b) Mark newly-inactive textures dirty so that we update the handle in
set_tex_handles.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes:
GL45-CTS.direct_state_access.xfb_buffers
This test looks correct to me, we should work out the
size value and report it rather than using only the size
from the Range interface.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
