The VIVS_PE_DEPTH_CONFIG_DISABLE_ZS in PE_DEPTH_CONFIG caused depth
write hangs on HALTI5.
This is because the 0x11000000 bits in RA have to be toggled on
when setting this bit to zero. This combination will disable
early-z rejection on GC7000L, which was previously done through
a different bit.
Tested only on GC7000L so far.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5456>
While TRAP_PRESENT is always at the same place, EXCP_EN can be
different between shader stages. This sets it properly.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6452>
PTB assumes that base instance to be 0 at start of tile, but hw would
not do that, we need to set it. It is worth to note that the opcode
name is somewhat confusing as what it really sets is the base
instance. We could rename the opcode, but then the name would be
different to the original Broadcom name, so confusing in any case.
This fixes several dEQP-GLES3 and dEQP-GLES31 tests that passes
individually, but started to fail depending on other tests running
before using base instance different to zero.
This is the backport of a Vulkan patch that fixed some Vulkan CTS
tests that start to fails after some other tests used an instance id.
CC: 20.2 20.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6447>
As with a6xx (commits beb02a78, 5785bcc8), the blob doesn't set this flag
for a5xx when fragcoords are used but not proper varyings. See for
example dEQP-GLES2.functional.shaders.builtin_variable.fragcoord_xyz.
The hope was that this would clear up separate_shader fails/flakes like it
helped with a6xx's flakes, but that didn't happen.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6464>
Return the actual number of planes in these formats (one) instead of the
number of planes used for lowering (two).
Fixes: d5c857837a ("gallium/dri2: Fix creation of multi-planar modifier images")
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6449>
We got another flake, this time on
dEQP-GLES31.functional.compute.shared_var.atomic.compswap.highp_uint,
which blocked !4162 from merging. Mark the rest flaky so we don't have to
keep firefighting one test at a time.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6459>
All three passes have the same bug where, in the mov/vec case they
unconditionally return true even if they don't change anything. Throw
in a bit size check so they return false properly.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6435>
It seems we do have some limits. Similar to older gens, # of tiles per
pipe cannot be more than 32. But I could not trigger any hangs with 16
or more tiles per pipe in either X or Y direction, so that limit does
not seem to apply.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6461>
Adds shader disk caching for nvc0 to reduce the need to every time compile
shaders. Shaders are saved into disk_shader_cache from nvc0_screen structure.
It serializes the input nv50_ir_prog_info to compute the hash key and
also to do a byte compare between the original nv50_ir_prog_info and the one
saved in the cache. If keys match and also the byte compare returns they
are equal, shaders are same, and the compiled nv50_ir_prog_info_out from the
cache can be used instead of compiling input info.
Seems to be significantly improving loading times, these are the results
from running bunch of shaders:
cache off
real 2m58.574s
user 21m34.018s
sys 0m8.055s
cache on, first run
real 3m32.617s
user 24m52.701s
sys 0m20.400s
cache on, second run
real 0m23.745s
user 2m43.566s
sys 0m4.532s
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
Adds a function for serializing a nv50_ir_prog_info structure, which is
needed for shader caching.
v2 (Karol): strip nir when serializing
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
Adds a function for printing nv50_ir_prog_info_out structure
in JSON-like format, which could be used in debugging.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
Adds functions for serializing and deserializing
nv50_ir_prog_info_out structure, which are needed for shader caching.
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
Split out the output relevant fields from the nv50_ir_prog_info struct
in order to have a cleaner separation between the input and output of
the compilation.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
The initial plan was to use this for OpenCL kernels, but back then the
plan was to convert from LLVM to TGSI. As it turns out, we didn't went
that way.
Right now for OpenCL we don't reqiure supporting multiple entry points
inside the same binary and if we want to support it later, we can add
this back.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4264>
We only need to assert this in the `io_lowered` case, which actually
uses num_outputs. This assert also doesn't appear to hold on iris,
where num_outputs is showing up as 0 (because it's likely not yet set).
Fixes assertion failures in edgeflag related tests on iris, which
doesn't use the io_lowered path currently.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3456
Fixes: 484a60d547 ("nir: generate lowered IO in nir_lower_passthrough_edgeflags")
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6450>
When using nir_lower_interpolation, we need to propagate the IO
semantics from the load_interpolated_input to the new
load_fs_input_interp_deltas intrinsics. nir_lower_io assumes
they will be filled out.
This fixes assertions in most tests on iris since commit
01ab308edc, where nir_lower_io
started reading this field.
Fixes: 01ab308edc ("nir: update IO semantics in nir_io_add_const_offset_to_base")
Fixes: 502abfce7f ("nir: save IO semantics in lowered IO intrinsics")
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6450>
This is a win in terms of line of decoder code, but it's a regression in
terms of verbosity. That will be fixed when we teach the decode
autogeneration about defaults and non-canonical fields.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
The heart of the series! Build up all the structures separately and
combine with an OPAQUE pack. Groups state naturally and eliminates the
memcpy. And a nice cleanup too.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Not much difference but eliminates a reference to shader_meta (and
avoids a memcpy but who cares).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
These special OPAQUE packs use packed structs in the struct template,
instead of struct templates. The use case is packing nested structs
out-of-band, to fit into the CSO model.
A more conventional GenXML solution would be an overlapping uint, but
this breaks our assumptions about struct packing which are otherwise
correct, so this seemed less intrusive than risk disrupting the main
pack routines.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
This is quite a bit cleaner, I think, and validates the XML in
preparation for moving over the main driver.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
This contains a bit of everything, so just XML for this commit. The rest
of the series will be slowly moving over to this representation.
The one noteworthy addition is the rename of "No MSAA" to
"Single-sampled lines". This came about due to a buggy branch that
forgot to set this bit. Ths worked, with the caveat of the following
tests failing with a single-sampled framebuffer:
dEQP-GLES2.functional.rasterization.interpolation.basic.line_loop_wide
dEQP-GLES2.functional.rasterization.interpolation.basic.line_strip_wide
dEQP-GLES2.functional.rasterization.interpolation.basic.lines_wide
dEQP-GLES2.functional.rasterization.interpolation.projected.line_loop_wide
dEQP-GLES2.functional.rasterization.interpolation.projected.line_strip_wide
dEQP-GLES2.functional.rasterization.interpolation.projected.lines_wide
dEQP-GLES2.functional.rasterization.primitives.line_loop
dEQP-GLES2.functional.rasterization.primitives.line_loop_wide
dEQP-GLES2.functional.rasterization.primitives.line_strip
dEQP-GLES2.functional.rasterization.primitives.line_strip_wide
dEQP-GLES2.functional.rasterization.primitives.lines
dEQP-GLES2.functional.rasterization.primitives.lines_wide
That is, this bit controls the behaviour of line rasterization with
multisampling. This is required to implement the divergent behaviours
described in the OpenGL ES 3.2 specification sections 13.6.1 ("Basic
Line Segment Rasterization") and 13.6.4 ("Line Multisample
Rasterization"), where setting this bit corresponds to the former
(single-sampled) behaviour.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
For non-fragment shaders, we can just use the preuploaded BO as-is and
do no packing/copying at draw-time. Fragment shaders are still a bit of
an edge case, in having rasterizer/zsa/blend state in the same
descriptor, but now we can specialize that path further for
fragment-only.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Now that we've fixed all the implicit state dependencies, these don't
change after the variant is created.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Let's keep all the shader descriptor stuff together.
Note that the packing here can be constant folded entirely in any
reasonable compiler.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
This isn't as clean as vertex shaders, since some of this state is only
known at draw-time (e.g. some reasons we might disable early-Z). But we
can still pack as much as we can ahead-of-time and then OR together
what's left at draw-time.
Thank you to Kristian for this one crazy trick (blob developers hate
it! er...)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
They only depend on shader properties so we can do all this work at CSO
create time, reducing draw-time overhead.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Rather than checking against the bound constant buffers. Like
with num_textures, this eliminates a dependency of the shader descriptor
on the context, which matters especially for vertex/compute shaders.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
We have just enough abstracted now to pack this ahead-of-time, during
the CSO create, instead of at draw-time. But it's only a start.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
This avoids a dependency of the shader descriptor on the texture/sampler
state, which simplifies state management. It also fixes pandecode
warnings where textures/samplers are specified but not referenced.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
The smallest job descriptor is smaller than 256, and with the
tighter packing, pandecode can sometimes error nowadays.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Now that the missing bits on SFBD are identified, and we have a
reasonable way to pack the properties for Bifrost, we can probably do
this everywhere to generalize the optimization and drop the quirk.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
These are analogues to the flags we have in the blend structure on
T760+, which enables us to fix shaderless and sRGB operation on T720.
Closes#2771
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: a64599a303 ("panfrost: Pass the sampler view format when creating a tex descriptor")
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
There's a lot of code here since the meaning of this field changes
depending on shader state. The good news is that our careful handling
allows preload registers to be decoded now, which pandecode could not
previously do. Likewise, the cmdstream code to emit this is now much
more obvious.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
Allows us to drop the redundant check by reordering, and will match the
conventions we'll use once the whole structure is XMLified.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
ctx->blend is already dereferenced by this point anyway.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6440>
